public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jingoo Han <jg1.han@samsung.com>
To: "'Andrew Morton'" <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
	"'Alessandro Zummo'" <a.zummo@towertech.it>,
	rtc-linux@googlegroups.com, Jingoo Han <jg1.han@samsung.com>
Subject: [PATCH 5/8] rtc: rtc-pm8xxx: use devm_*() functions
Date: Tue, 21 May 2013 15:17:52 +0900	[thread overview]
Message-ID: <000801ce55ea$ecdba950$c692fbf0$@samsung.com> (raw)

Use devm_*() functions to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/rtc/rtc-pm8xxx.c |   27 ++++++++-------------------
 1 file changed, 8 insertions(+), 19 deletions(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 14ee860..03f8f75 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -395,7 +395,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	if (pdata != NULL)
 		rtc_write_enable = pdata->rtc_write_enable;
 
-	rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
+	rtc_dd = devm_kzalloc(&pdev->dev, sizeof(*rtc_dd), GFP_KERNEL);
 	if (rtc_dd == NULL) {
 		dev_err(&pdev->dev, "Unable to allocate memory!\n");
 		return -ENOMEM;
@@ -407,16 +407,14 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
 	if (rtc_dd->rtc_alarm_irq < 0) {
 		dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
-		rc = -ENXIO;
-		goto fail_rtc_enable;
+		return -ENXIO;
 	}
 
 	rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
 							"pmic_rtc_base");
 	if (!(rtc_resource && rtc_resource->start)) {
 		dev_err(&pdev->dev, "RTC IO resource absent!\n");
-		rc = -ENXIO;
-		goto fail_rtc_enable;
+		return -ENXIO;
 	}
 
 	rtc_dd->rtc_base = rtc_resource->start;
@@ -432,7 +430,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "RTC control register read failed!\n");
-		goto fail_rtc_enable;
+		return rc;
 	}
 
 	if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
@@ -442,7 +440,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 		if (rc < 0) {
 			dev_err(&pdev->dev, "Write to RTC control register "
 								"failed\n");
-			goto fail_rtc_enable;
+			return rc;
 		}
 	}
 
@@ -453,13 +451,12 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, rtc_dd);
 
 	/* Register the RTC device */
-	rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
+	rtc_dd->rtc = devm_rtc_device_register(&pdev->dev, "pm8xxx_rtc",
 				&pm8xxx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc_dd->rtc)) {
 		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
 					__func__, PTR_ERR(rtc_dd->rtc));
-		rc = PTR_ERR(rtc_dd->rtc);
-		goto fail_rtc_enable;
+		return PTR_ERR(rtc_dd->rtc);
 	}
 
 	/* Request the alarm IRQ */
@@ -468,7 +465,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 				 "pm8xxx_rtc_alarm", rtc_dd);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
-		goto fail_req_irq;
+		return rc;
 	}
 
 	device_init_wakeup(&pdev->dev, 1);
@@ -476,12 +473,6 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "Probe success !!\n");
 
 	return 0;
-
-fail_req_irq:
-	rtc_device_unregister(rtc_dd->rtc);
-fail_rtc_enable:
-	kfree(rtc_dd);
-	return rc;
 }
 
 static int pm8xxx_rtc_remove(struct platform_device *pdev)
@@ -490,8 +481,6 @@ static int pm8xxx_rtc_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 	free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
-	rtc_device_unregister(rtc_dd->rtc);
-	kfree(rtc_dd);
 
 	return 0;
 }
-- 
1.7.10.4



                 reply	other threads:[~2013-05-21  6:17 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='000801ce55ea$ecdba950$c692fbf0$@samsung.com' \
    --to=jg1.han@samsung.com \
    --cc=a.zummo@towertech.it \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox