From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 26 Oct 2002 11:31:22 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 26 Oct 2002 11:31:22 -0400 Received: from smtp01.wxs.nl ([195.121.6.61]:28338 "EHLO smtp01.wxs.nl") by vger.kernel.org with ESMTP id ; Sat, 26 Oct 2002 11:31:18 -0400 Message-ID: <000c01c27d05$96c0ee50$1400a8c0@Freaky> From: "freaky" To: Subject: KT333, IO-APIC, Promise Fasttrak, Initrd [UPDATE] Date: Sat, 26 Oct 2002 17:37:27 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hey there, in addition to my previous posts with this topic I would like to post the kernel output. Additional info: kernel 2.4.20-pre11 gcc version 2.95.3 20010315 (release) Kernel config: http://freaky.bananateam.nl/config BIOS-e820: #Stripped insignificant zeros 0-9FC00 (usable) 9FC00-A0000 (reserved) F0000-100000 (reserved) 100000-1fff0000 (usable) 1FFF0000-1FFF8000 (ACPI DATA) 1FFF8000-20000000 (ACPI NVS) FEC00000-FEC01000 (reserved) FEE00000-FEE01000 (reserved) FFF800000-100000000 (reserved) 511MB LOWMEM available found SMP MP-table at 000FB940 # Is the uniprocessor IO-APIC causing this? AFAIK I didn't include SMP.... hm, page 000FB000 reserved twice hm, page 000FC000 reserved twice hm, page 000F6000 reserved twice hm, page 000F7000 reserved twice On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 3 at 0xFEC00000. Processors: 1 Kernel command line: vmlinuz ramdisk_size=7000 root=/dev/fd0u1440 vga=normal rw SLACK_KERNEL=new.i BOOT_IMAGE=vmlinuz root=/dev/fd0 Initializing CPU#0 Detected 1666.740 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3322.67 BogoMIPS Memory: 516472k/524224k available (1041k kernel code, 7364k reserved, 311k data, 100k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2000+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-18, 2-20, 2-21, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 18. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 001 01 1 1 0 1 0 1 1 A1 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ19 -> 0:19 IRQ22 -> 0:22 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1666.7379 MHz. ..... host bus clock speed is 266.6780 MHz. cpu: 0, clocks: 2666780, slice: 1333390 CPU0 PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3177] at 00:11.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P2) -> 22 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20276: IDE controller on PCI bus 00 dev 60 PDC20276: chipset revision 1 PDC20276: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik hda: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive hdc: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive hde: QUANTUM FIREBALLP AS30.0, ATA DISK drive hdf: ST340810A, ATA DISK drive hdg: IBM-DTLA-307020, ATA DISK drive hdh: Maxtor 91741U4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide0: probed IRQ 14 failed, using default. ide1 at 0x170-0x177,0x376 on irq 15 ide1: probed IRQ 15 failed, using default. ide2 at 0xec00-0xec07,0xe802 on irq 19 ide3 at 0xe400-0xe407,0xe002 on irq 19 hde: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=58168/16/63 hdf: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63 hdg: 40188960 sectors (20577 MB) w/1916KiB Cache, CHS=39870/16/63 hdh: 34004880 sectors (17410 MB) w/512KiB Cache, CHS=33735/16/63 hda: ATAPI 40X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache Partition check: hde: [PTBL] [3649/255/63] hde1 hde2 < hde5 > hdf: [PTBL] [4865/255/63] hdf1 hdg: [PTBL] [2501/255/63] hdg1 hdh: [PTBL] [2116/255/63] hdh1 hdh2 hdh3 hdh4 < hdh5 hdh6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7000K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xe0800f00, 00:40:f4:55:38:a7, IRQ 19 eth0: Identified 8139 chip type 'RTL-8139C' ataraid/d0: ataraid/d0p1 ataraid/d0p2 < ataraid/d0p5 > Drive 0 is 28629 Mb (33 / 0) Raid0 array consists of 1 drives. ataraid/d1: ataraid/d1p1 Drive 0 is 38166 Mb (33 / 64) Raid0 array consists of 1 drives. ataraid/d2: ataraid/d2p1 Drive 0 is 19623 Mb (34 / 0) Raid0 array consists of 1 drives. ataraid/d3: ataraid/d3p1 ataraid/d3p2 ataraid/d3p3 ataraid/d3p4 < ataraid/d3p5 ataraid/d3p6 > Drive 0 is 16603 Mb (34 / 64) Raid0 array consists of 1 drives. Promise Fasttrak(tm) Softwareraid driver for linux version 0.03beta NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Insert root floppy disk to be loaded into RAM disk and press ENTER RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 100k freed That was the rescuedisk (compressed 1 disk image) with the 5 install disks (wget ftp://ftp.slackware.org/slackware/slackware-current/rootdisks/install.[1-5]) It gives: RAMDISK: ext2 fs found at block 0 Loading 6464 blocks [5 disks] into ram disk VFS: Insert disk #2 and press ENTER # It reads this disk in 0.5 secs or so? Loading disk #2... VFS: Insert disk #3 and press ENTER # It reads this disk in 0.5 secs or so? Loading disk #2... VFS: Insert disk #4 and press ENTER # It reads this disk in 0.5 secs or so? Loading disk #2... VFS: Insert disk #5 and press ENTER # It reads this disk in 0.5 secs or so? Loading disk #2... Then it boots and comes up with ext2 filesystem errors on directory #41. Sometimes it starts actually reading at disk 3 or 4, but it never actually reads disk 2... Most of the time it doesn't actually read any disk but 1 though (the floppy read LED does go on tho'). Since disk 2 is never loaded it always comes up with the directory #41 ext2 fs errors.