From: "Gavin Shan" <shan.gavin.cn@gmail.com>
To: <linux-kernel@vger.kernel.org>
Subject: PIIX4 DMA Timeout
Date: Tue, 20 May 2008 20:23:11 +0800 [thread overview]
Message-ID: <001901c8ba74$4662ec80$01fca8c0@microsof60b8d6> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 1995 bytes --]
Hi All,
There has one MV64460 on my board, which includes 2 PCI bridges. PIIX4 is on slot 3 of PCI1.
But now, IDE driver reported it's timeouted on DMA operation. Thanks in advance for your
suggestions.
Resources of PIIX4 function 1
=====================
0001:00:03.1: idx=0 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=1 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=2 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=3 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=4 flags=0x00000101 start=0xd8000000 end=0xd800000f
Console Output
============
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0001:00:03.1
0001:00:03.1: idx=0 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=1 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=2 flags=0x20000110 start=0x00000000 end=0x00000007
0001:00:03.1: idx=3 flags=0x20000110 start=0x00000000 end=0x00000000
0001:00:03.1: idx=4 flags=0x00000101 start=0xd8000000 end=0xd800000f
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd8000000-0xd8000007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd8000008-0xd800000f, BIOS settings: hdc:pio, hdd:pio
hdc: HTE721010G9AT00, ATA DISK drive
hdc: max request size: 512KiB
hdc: 195371568 sectors (100030 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(33)
hdc: cache flushes supported
hdc:<4>hdc: dma_timer_expiry: dma status == 0x26
hdc: DMA interrupt recovery
hdc: lost interrupt
hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
ide: failed opcode was: unknown
hdc: DMA disabled
ide1: reset: success
hdc2 hdc3 hdc4
Thanks in advance,
Gavinÿôèº{.nÇ+·®+%Ëÿ±éݶ\x17¥wÿº{.nÇ+·¥{±þG«éÿ{ayº\x1dÊÚë,j\a¢f£¢·hïêÿêçz_è®\x03(éÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?¨èÚ&£ø§~á¶iOæ¬z·vØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?I¥
next reply other threads:[~2008-05-20 12:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-20 12:23 Gavin Shan [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-05-20 13:04 PIIX4 DMA Timeout Gavin Shan
2008-05-20 16:53 ` Maciej W. Rozycki
2008-05-21 1:08 ` gshan
2008-05-21 2:37 ` Maciej W. Rozycki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001901c8ba74$4662ec80$01fca8c0@microsof60b8d6' \
--to=shan.gavin.cn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox