From: "Steve Lee" <steve@tuxsoft.com>
To: "'jan'" <jan@seismo.ifg.ethz.ch>, <linux-kernel@vger.kernel.org>
Subject: RE: A7M266-D
Date: Thu, 21 Nov 2002 10:09:27 -0600 [thread overview]
Message-ID: <004401c29178$6370b8f0$0201a8c0@pluto> (raw)
In-Reply-To: <3DDCEEC6.5030806@seismo.ifg.ethz.ch>
Add "CONFIG_BLK_DEV_AMD74XX=y" to your config and you'll be fine.
-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of jan
Sent: Thursday, November 21, 2002 8:34 AM
To: linux-kernel@vger.kernel.org
Subject: A7M266-D
dear list,
i have an A7M266-D board with two AMD Athlon MP 2000+ on it.
Unfortunately I am unable to compile the correct driver for the AM7441
IDE Controller (using 2.4.19)
I always get this under SuSE :
AMD7441: detected chipset, but driver not compiled in!
When using a precompiled SUSE or RedHat Kernel it gets recognized.
SuSE Linux 2.4.18-64GB-SMP output :
AMD_IDE: IDE controller on PCI bus 00 dev 39
AMD_IDE: chipset revision 4
AMD_IDE: not 100% native mode: will probe irqs later
AMD_IDE: AMD-768 Opus (rev 04) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
RedHat 2.4.18-14smp output :
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
AMD7441: disabling single-word DMA support (revision < C4)
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
What am I doing wrong ? and why RedHat and SuSE Kernel have no Problem
with this Chipset ?
best regards,
Jan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2002-11-21 16:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-21 14:33 A7M266-D jan
2002-11-21 15:37 ` A7M266-D Alan Cox
2002-11-21 15:58 ` A7M266-D Marcus Sundberg
2002-11-21 16:08 ` A7M266-D jan
2002-11-21 16:09 ` Steve Lee [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-11-21 16:24 A7M266-D Shawn Starr
2002-11-22 7:13 ` A7M266-D jan
2002-02-19 16:33 A7M266-D Mark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='004401c29178$6370b8f0$0201a8c0@pluto' \
--to=steve@tuxsoft.com \
--cc=jan@seismo.ifg.ethz.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox