From: "Paul Fulghum" <paulkf@microgate.com>
To: <Telford002@aol.com>, <linux-kernel@vger.kernel.org>
Subject: Re: PCI Device Setup Question
Date: Fri, 5 Oct 2001 08:49:53 -0500 [thread overview]
Message-ID: <009701c14da4$9c87df10$0c00a8c0@diemos> (raw)
In-Reply-To: <66.154deb31.28ee7185@aol.com>
Joachim Martillo wrote:
> These cards use the PLX9050 PCI interface chip
...
> The cards are never masters and do no support
> PCI PREFETCH and if PCI transactions are made
> to them that relate to PCI PREFETCH, they become
> confused and hang.
...
> The PCI bus driver allocates the sab8253x registers
> as prefetchable memory resources.
The PCI9050 LAS0RR local configuration register
controls whether the address range is marked
prefetchable or not. If bit 3 is set, then the range is marked as
prefetchable in Bit 3 of PCI configuration register BAR2.
I would verify that the EEPROM attached to the PCI9050 is setup
to program the LAS0RR bit 3 to zero to mark the address range
as *not* supporting prefetch.
Paul Fulghum, paulkf@microgate.com
Microgate Corporation, www.microgate.com
prev parent reply other threads:[~2001-10-05 13:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-05 2:14 PCI Device Setup Question Telford002
2001-10-05 13:49 ` Paul Fulghum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009701c14da4$9c87df10$0c00a8c0@diemos' \
--to=paulkf@microgate.com \
--cc=Telford002@aol.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox