From: "Sönke Ruempler" <ruempler@topconcepts.com>
To: <linux-kernel@vger.kernel.org>
Subject: OOPS in vmscan.c:553
Date: Tue, 1 Jul 2003 08:43:27 +0200 [thread overview]
Message-ID: <009c01c33f9c$13bb5cc0$9700a8c0@eagle> (raw)
hi there,
we had that OOPS the last night two times. does anyone know what to do? do
you need more info?
ksymoops 2.4.1 on i686 2.4.21. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.21/ (default)
-m /boot/System.map-2.4.21 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
No modules in ksyms, skipping objects
Warning (read_lsmod): no symbols in lsmod, is /proc/modules a valid lsmod
file?
Warning (compare_maps): ksyms_base symbol GPLONLY___ide_do_rw_disk not found
in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_build_dmatable not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_destroy_dmatable not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_dma_intr not found in
System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_get_best_pio_mode not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pci_register_driver
not found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pci_unregister_driver
not found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_pio_timings not found
in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_set_xfer_rate not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_dma not found in
System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_pci_device not
found in System.map. Ignoring ksyms_base entry
Warning (compare_maps): ksyms_base symbol GPLONLY_ide_setup_pci_devices not
found in System.map. Ignoring ksyms_base entry
Jun 30 20:42:56 web01 kernel: kernel BUG at vmscan.c:553!
Jun 30 20:42:56 web01 kernel: invalid operand: 0000
Jun 30 20:42:56 web01 kernel: CPU: 0
Jun 30 20:42:56 web01 kernel: EIP: 0010:[refill_inactive+166/256] Not
tainted
Jun 30 20:42:56 web01 kernel: EIP: 0010:[<c0127ff6>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
Jun 30 20:42:56 web01 kernel: EFLAGS: 00010246
Jun 30 20:42:56 web01 kernel: eax: 00000000 ebx: c1122f80 ecx: c1122f9c
edx: c1b619b0
Jun 30 20:42:56 web01 kernel: esi: c1b619b0 edi: 00000007 ebp: 00000002
esp: c1c33f5c
Jun 30 20:42:56 web01 kernel: ds: 0018 es: 0018 ss: 0018
Jun 30 20:42:56 web01 kernel: Process kswapd (pid: 4, stackpage=c1c33000)
Jun 30 20:42:56 web01 kernel: Stack: 00000020 000001d0 00000006 00000020
c0128094 00000008 c0220500 00000006
Jun 30 20:42:56 web01 kernel: 000001d0 c0220500 00000000 c012811c
00000020 c0220500 00000002 c1c32000
Jun 30 20:42:56 web01 kernel: c012822f c02203a0 00000000 ffffffff
0008e000 c01282a6 c02203a0 c1c32000
Jun 30 20:42:56 web01 kernel: Call Trace: [shrink_caches+68/144]
[try_to_free_pages_zone+60/96] [kswapd_balance_pgdat+79/160]
[kswapd_balance+38/64] [kswapd+161/192]
Jun 30 20:42:56 web01 kernel: Call Trace: [<c0128094>] [<c012811c>]
[<c012822f>] [<c01282a6>] [<c01283e1>]
Jun 30 20:42:56 web01 kernel: [<c0128340>] [<c0105000>] [<c01055d6>]
[<c0128340>]
Jun 30 20:42:56 web01 kernel: Code: 0f 0b 29 02 26 c6 1f c0 89 f6 8b 43 18
a9 80 00 00 00 74 08
>>EIP; c0127ff6 <refill_inactive+a6/100> <=====
Trace; c0128094 <shrink_caches+44/90>
Trace; c012811c <try_to_free_pages_zone+3c/60>
Trace; c012822f <kswapd_balance_pgdat+4f/a0>
Trace; c01282a6 <kswapd_balance+26/40>
Trace; c01283e1 <kswapd+a1/c0>
Trace; c0128340 <kswapd+0/c0>
Trace; c0105000 <_stext+0/0>
Trace; c01055d6 <arch_kernel_thread+26/30>
Trace; c0128340 <kswapd+0/c0>
Code; c0127ff6 <refill_inactive+a6/100>
00000000 <_EIP>:
Code; c0127ff6 <refill_inactive+a6/100> <=====
0: 0f 0b ud2a <=====
Code; c0127ff8 <refill_inactive+a8/100>
2: 29 02 sub %eax,(%edx)
Code; c0127ffa <refill_inactive+aa/100>
4: 26 c6 1f c0 movb $0xc0,%es:(%edi)
Code; c0127ffe <refill_inactive+ae/100>
8: 89 f6 mov %esi,%esi
Code; c0128000 <refill_inactive+b0/100>
a: 8b 43 18 mov 0x18(%ebx),%eax
Code; c0128003 <refill_inactive+b3/100>
d: a9 80 00 00 00 test $0x80,%eax
Code; c0128008 <refill_inactive+b8/100>
12: 74 08 je 1c <_EIP+0x1c> c0128012
<refill_inactive+c2/100>
14 warnings issued. Results may not be reliable.
thx, soenke.
reply other threads:[~2003-07-01 6:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009c01c33f9c$13bb5cc0$9700a8c0@eagle' \
--to=ruempler@topconcepts.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox