Re: [2.5.53] So sloowwwww......

["Paul Rolland" <rol@as2917.net>]

Hello,

> Paul> I'm just playing a little bit with Kernel 2.5.53, and I've been
> Paul> afraid of finding it quite slow...
> 
> Not a bad report, but you didn't give any info on the machine 
> configuration in terms of:
> 	     
> - CPU type and speed
> - memory
> - disk
> 
Correct. Here are some more :
6 [18:34] rol@donald:/kernels> cat /proc/cpuinfo 
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping        : 4
cpu MHz         : 2423.933
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips        : 4836.55

7 [18:34] rol@donald:/kernels> cat /proc/meminfo 
        total:    used:    free:  shared: buffers:  cached:
Mem:  526839808 516452352 10387456        0 18071552 403718144
Swap: 3764346880  2527232 3761819648
MemTotal:       514492 kB
MemFree:         10144 kB
MemShared:           0 kB
Buffers:         17648 kB
Cached:         392980 kB
SwapCached:       1276 kB
Active:         289588 kB
Inactive:       167568 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       514492 kB
LowFree:         10144 kB
SwapTotal:     3676120 kB
SwapFree:      3673652 kB

8 [18:34] rol@donald:/kernels> df -aT
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/hda2     ext3     2063536   1210488    748224  62% /
none          proc           0         0         0   -  /proc
/dev/hda8     ext3    46267844   7936068  35981472  19% /data
none        devpts           0         0         0   -  /dev/pts
none         tmpfs      257244         0    257244   0% /dev/shm
/dev/hda4     ext3    12317944    404104  11288112   4% /usr/local
/dev/hda7     ext3     2063504     99620   1859064   6% /var
/dev/sda1     ext3    10320888    692592   9103960   8% /kernels
/dev/sda3     ext3     7740648    630368   6717016   9% /witbe
/dev/sda6 reiserfs    10919580     32840  10886740   1% /divers
/dev/hdb6 reiserfs    29406044  19067932  10338112  65% /mp3
/dev/hda1     ntfs     2096450   1279606    816844  62% /diskC
/dev/hda5     ntfs    10241404   4065772   6175632  40% /diskF
/dev/hdb2     vfat     5122732   3047232   2075500  60% /diskD
/dev/hdb5     vfat     5122704    900844   4221860  18% /diskE
/dev/cdrom iso9660       60760     60760         0 100% /mnt/cdrom

ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS5513
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800BB-00CAA1, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8584A, ATAPI CD/DVD-ROM drive
hdd: TDK CDRW4800B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-cd: passing drive hdd to ide-scsi emulation.
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hda4
 hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
...
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
        <Adaptec 2940 Ultra2 SCSI adapter>
        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs

(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
  Vendor: FUJITSU   Model: MAN3367MP         Rev: 5507
  Type:   Direct-Access                      ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
...

Hope this helps,
Regards,
Paul