[PATCH 1/2] ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards

Javier Martinez Canillas
2014-09-17T11:51:21Z

commit 546b117fdf17 ("rtc: s3c: add support for RTC of Exynos3250 SoC")
added an "rtc_src" DT property for the Samsung's S3C Real Time Clock
controller that specifies the 32.768 kHz clock that uses the RTC as its
source clock. In the case of the Peach Pit and Pi machines, the Maxim
77802 32kHz AP clock is used as the source clock.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++-
2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 9a23382..bfd189e 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5420.dtsi"

/ {
@@ -151,7 +152,7 @@
status = "okay";
clock-frequency = <400000>;

- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
@@ -727,6 +728,8 @@

&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};

&spi_2 {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 1d31c81..84ec1ce 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -12,6 +12,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5800.dtsi"

/ {
@@ -150,7 +151,7 @@
status = "okay";
clock-frequency = <400000>;

- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
@@ -715,6 +716,8 @@

&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};

&spi_2 {
--
2.1.0