From: s-jaschke@t-online.de (Stefan Jaschke)
To: Oliver Teuber <teuber@core.devicen.de>
Cc: linux-kernel@vger.kernel.org, epic@skyld.com
Subject: Re: epic100 error
Date: Fri, 20 Apr 2001 13:09:15 +0200 [thread overview]
Message-ID: <01042013091501.07156@antares> (raw)
In-Reply-To: <20010417184552.A6727@core.devicen.de>
In-Reply-To: <20010417184552.A6727@core.devicen.de>
Hi,
it seems the epic100 driver broke between 2.4.2 and 2.4.3.
I reloaded the epic100 module with the parameter "debug=6".
Unfortunately, I cannot make much out of the log:
Apr 20 12:47:01 antares kernel: epic100.c:v1.11 1/7/2001 Written by Donald Becker <becker@scyld.com>
Apr 20 12:47:01 antares kernel: http://www.scyld.com/network/epic100.html
Apr 20 12:47:01 antares kernel: (unofficial 2.4.x kernel port, version 1.1.6, January 11, 2001)
Apr 20 12:47:01 antares kernel: epic100(00:08.0): EEPROM contents
Apr 20 12:47:01 antares kernel: e000 2829 ec39 aa00 001d 1c08 10b8 a011 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: 0010 0000 1980 2100 0000 0000 0003 0000 0701 0000 0000 0000 4d53 3943 3334 5432
Apr 20 12:47:01 antares kernel: 2058 2020 0000 0000 0280 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Apr 20 12:47:01 antares kernel: epic100(00:08.0): MII transceiver #3 control 3000 status 7809.
Apr 20 12:47:01 antares kernel: epic100(00:08.0): Autonegotiation advertising 01e1 link partner 0001.
Apr 20 12:47:01 antares kernel: eth0: SMSC EPIC/100 83c170 at 0xd800, IRQ 9, 00:e0:29:28:39:ec.
Apr 20 12:48:07 antares kernel: eth0: Setting half-duplex based on MII xcvr 3 register read of 0001.
Apr 20 12:48:07 antares kernel: eth0: epic_open() ioaddr d800 IRQ 9 status 0512 half-duplex.
Apr 20 12:48:10 antares kernel: eth0: Media monitor tick, Tx status 0000000b.
Apr 20 12:48:10 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:10 antares kernel: eth0: Setting full-duplex based on MII #3 link partner capability of 41e1.
Apr 20 12:48:15 antares kernel: eth0: Media monitor tick, Tx status 0000000b.
Apr 20 12:48:15 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:20 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:20 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:25 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:25 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:30 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:30 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:35 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:35 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:40 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:40 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:45 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:45 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 240000 RxStatus 1090021.
Apr 20 12:48:45 antares kernel: eth0: Interrupt, status=0x00250001 new intstat=0x00240000.
Apr 20 12:48:45 antares kernel: In epic_rx(), entry 0 00601021.
Apr 20 12:48:45 antares kernel: epic_rx() status was 00601021.
Apr 20 12:48:45 antares kernel: eth0: Interrupt, status=0x00240000 new intstat=0x00240000.
Apr 20 12:48:45 antares kernel: eth0: exiting interrupt, intr_status=0x240000.
Apr 20 12:48:46 antares kernel: eth0: Interrupt, status=0x008d0004 new intstat=0x008c0000.
Apr 20 12:48:46 antares last message repeated 32 times
Apr 20 12:48:46 antares kernel: eth0: Too much work at interrupt, IntrStatus=0x008d0004.
Apr 20 12:48:46 antares kernel: eth0: exiting interrupt, intr_status=0x8d0004.
Apr 20 12:48:50 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:50 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 8c0000 RxStatus 6014a1.
Apr 20 12:48:55 antares kernel: eth0: Media monitor tick, Tx status 0000400b.
Apr 20 12:48:55 antares kernel: eth0: Other registers are IntMask 13bf IntStatus 8c0000 RxStatus 6014a1.
I also noted that there are substantial differences between the original epic100.c at
http://www.scyld.com/network/epic100.html and the version included with 2.4.3.
Who did these changes?
Stefan J.
--
Stefan R. Jaschke <stefan@jaschke-net.de>
http://www.jaschke-net.de
next prev parent reply other threads:[~2001-04-20 11:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-17 16:45 epic100 error Oliver Teuber
2001-04-17 20:34 ` Stefan Jaschke
[not found] ` <20010418204021.A14531@se1.cogenit.fr>
2001-04-20 8:22 ` Stefan Jaschke
2001-04-20 10:25 ` Francois Romieu
2001-04-20 11:30 ` Stefan Jaschke
2001-04-20 14:05 ` Stefan Jaschke
2001-04-20 14:33 ` Francois Romieu
2001-04-20 15:57 ` Stefan Jaschke
2001-04-20 16:45 ` Francois Romieu
2001-04-20 20:13 ` Stefan Jaschke
2001-04-20 11:09 ` Stefan Jaschke [this message]
2001-04-20 11:33 ` Jeff Garzik
2001-04-20 12:07 ` Stefan Jaschke
2001-04-20 8:14 ` Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=01042013091501.07156@antares \
--to=s-jaschke@t-online.de \
--cc=epic@skyld.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stefan@jaschke-net.de \
--cc=teuber@core.devicen.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox