eing reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete ide-scsi: (IO,CoD) != (0,1) while issuing a packet command hdb: ATAPI reset complete hdb: irq timeout: status=0x80 { Busy } scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 SCSI host 0 abort (pid 0) timed out - resetting SCSI bus is being reset for host 0 channel 0. hdb: ATAPI reset complete hdb: irq timeout: status=0x80 { Busy } hdb: ATAPI reset complete hdb: irq timeout: status=0x80 { Busy } hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest } hdb: drive not ready for command hdb: status timeout: status=0xd0 { Busy } hdb: drive not ready for command hdb: ATAPI reset complete ide-scsi: The scsi wants to send us more data than expected - discarding data ide-scsi: transferred 256 of 352 bytes ide-scsi: The scsi wants to send us more data than expected - discarding data ide-scsi: transferred 64 of 82 bytes ide-scsi: The scsi wants to send us more data than expected - discarding data ide-scsi: transferred 256 of 352 bytes Vendor: CREATIVE Model: CD-R× RW¼432E Rev: ñ.´5 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 ide-scsi: The scsi wants to send us more data than expected - discarding data ide-scsi: transferred 64 of 82 bytes ide-scsi: The scsi wants to send us more data than expected - discarding data ide-scsi: transferred 132 of 158 bytes sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 3c59x.c:LK1.1.13 27 Jan 2001 Donald Becker and others. http://www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt eth0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd800, 00:01:02:bd:fc:dd, IRQ 18 product code 4347 rev 00.12 date 08-04-00 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. Media override to transceiver type 0 (10baseT). Enabling bus-master transmits and whole-frame receives. eth0: scatter/gather enabled. h/w checksums enabled eth1: 3Com PCI 3c905B Cyclone 100baseTx at 0xe000, 00:50:04:99:4a:bd, IRQ 16 product code 544a rev 00.12 date 04-23-99 8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface. Media override to transceiver type 4 (100baseTX). Enabling bus-master transmits and whole-frame receives. eth1: scatter/gather enabled. h/w checksums enabled eth0: Media override to transceiver 0 (10baseT). eth1: Media override to transceiver 4 (100baseTX). cm: version $Revision: 5.64 $ time 23:15:29 Jun 3 2001 cm: found CM8738 adapter at io 0xd400 irq 16 chip version = 033 cm: Enable SPDIF loop Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... Winbond chip at EFER=0x3f0 key=0x87 devid=97 devrev=73 oldid=ff Winbond chip type 83977TF / SMSC 97w33x/97w34x Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=02 Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3 Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0 Winbond LPT Config: Port mode=ECP SMSC Super-IO detection, now testing Ports 2F0, 370 ... 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 16 0x378: readIntrThreshold is 16 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x48 0x378: ECP settings irq=7 dma= parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). ip_tables: (c)2000 Netfilter core team ncr53c8xx: at PCI bus 0, device 11, function 0 ncr53c8xx: 53c895 detected with Tekram NVRAM ncr53c895-0: rev 0x1 on pci bus 0 device 11 function 0 irq 19 ncr53c895-0: Tekram format NVRAM, ID 7, Fast-40, Parity Checking scsi1 : ncr53c8xx-3.4.3b-20010512 Vendor: SEAGATE Model: ST318436LW Rev: 0010 Type: Direct-Access ANSI SCSI revision: 03 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 ncr53c895-0-<0,*>: FAST-40 WIDE SCSI 80.0 MB/s (25 ns, offset 31) SCSI device sda: 35885168 512-byte hdwr sectors (18373 MB) sda: sda1 sda2 sda3 sda4 reiserfs: checking transaction log (device 08:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:04) ... Using r5 hash to sort names ReiserFS version 3.6.25 lvm -- Module successfully deactivated