From: "Dwayne Rightler" <drightler@technicalogic.com>
To: <linux-kernel@vger.kernel.org>
Cc: "Dhruv Matani" <dhruvbird@gmx.net>
Subject: Re: DriveReady SeekComplete Error...
Date: Tue, 13 Jul 2004 07:32:46 -0500 [thread overview]
Message-ID: <015701c468d5$818dc090$0200000a@darkomen.lan> (raw)
In-Reply-To: 1089721822.4215.3.camel@localhost.localdomain
I have a similar problem with a Samsung hard drive. Model SV2044D. The
output of 'hdparm -i' below indicates it supports several multiword and
ultra DMA modes but if i run the drive in anything other than PIO mode it
gets DMA timeouts and SeekComplete Errors. This has been on every kernel I
can recall in the 2.4 and 2.6 series.
demigod:~# hdparm -i /dev/hda
/dev/hda:
Model=SAMSUNG SV2044D, FwRev=MM200-53, SerialNo=0228J1FN905733
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=472kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39862368
IORDY=yes, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17: 1 2 3 4
* signifies the current active mode
----- Original Message -----
From: "Dhruv Matani" <dhruvbird@gmx.net>
To: <linux-kernel@vger.kernel.org>
Sent: Tuesday, July 13, 2004 7:30 AM
Subject: DriveReady SeekComplete Error...
> Hi,
> I've been getting this error for my brand new (2 months old) Samsung
> HDD. The model Number is: SV0411N, and it is a 40GB disk. I'm using the
> kernel version 2.4.20-8 provided by RedHat. When I used RH-7.2(before
> upgrading to RH-9), the same HDD worked fine. Also, when I re-installed
> RH-7.2, it worked fine?
>
> Any suggestions?
>
> Please cc me the reply, sine I'm not subscribed.
> Thanks ;-)
>
> --
> -Dhruv Matani.
> http://www.geocities.com/dhruvbird/
>
> As a rule, man is a fool. When it's hot, he wants it cold.
> When it's cold he wants it hot. He always wants what is not.
> -Anon.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2004-07-13 12:31 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-13 12:30 DriveReady SeekComplete Error Dhruv Matani
2004-07-13 12:32 ` Dwayne Rightler [this message]
[not found] ` <40F3D4AC.9050407@gardenali.biz>
2004-07-13 14:27 ` Dhruv Matani
2004-07-13 14:29 ` Dhruv Matani
2004-07-13 14:47 ` Dhruv Matani
2004-07-13 15:01 ` Bartlomiej Zolnierkiewicz
-- strict thread matches above, loose matches on Subject: below --
2004-07-13 17:23 Piszcz, Justin Michael
2004-07-14 20:10 ` Dwayne Rightler
2004-07-15 4:08 ` Dhruv Matani
2004-07-26 14:32 ` Dhruv Matani
2004-07-26 14:51 ` Dwayne Rightler
2004-08-20 3:22 ` Dhruv Matani
2004-07-13 12:44 Piszcz, Justin Michael
2004-07-13 15:57 ` Dwayne Rightler
2004-06-04 10:15 mattia
2004-06-04 10:22 ` Jens Axboe
2004-06-04 11:44 ` Bartlomiej Zolnierkiewicz
2004-06-04 11:56 ` Jens Axboe
2004-06-04 12:15 ` Bartlomiej Zolnierkiewicz
2004-06-04 12:17 ` Jens Axboe
2004-06-04 12:40 ` Bartlomiej Zolnierkiewicz
2004-06-04 21:55 ` Ed Tomlinson
2004-06-04 19:58 ` Eric D. Mudama
2004-06-05 13:48 ` mattia
2004-06-04 7:54 Rick Jansen
2004-06-04 9:02 ` Daniel Egger
2004-06-04 9:38 ` John Bradford
2004-06-04 9:43 ` John Bradford
2004-06-04 9:54 ` Rick Jansen
2004-06-04 9:59 ` Jens Axboe
2004-06-04 10:02 ` Rick Jansen
2004-06-04 10:08 ` Jens Axboe
2004-06-04 13:02 ` Andy Hawkins
2004-06-04 13:41 ` Daniel Egger
2004-06-04 13:53 ` Rick Jansen
2004-06-04 14:05 ` John Bradford
2004-06-04 14:18 ` Rick Jansen
2004-06-04 19:32 ` Bruce Allen
2004-06-04 14:15 ` Daniel Egger
2004-06-04 14:09 ` John Bradford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='015701c468d5$818dc090$0200000a@darkomen.lan' \
--to=drightler@technicalogic.com \
--cc=dhruvbird@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox