From: "Adam Kropelin" <akropel1@rochester.rr.com>
To: "Jens Axboe" <axboe@suse.de>
Cc: <linux-kernel@vger.kernel.org>, "Dave Jones" <davej@suse.de>
Subject: 2.5.8-dj1 with IDE TCQ doesn't survive boot
Date: Wed, 17 Apr 2002 20:11:15 -0400 [thread overview]
Message-ID: <02e001c1e66d$8e927070$02c8a8c0@kroptech.com> (raw)
Jens,
Tried 2.5.8-dj1 here with IDE TCQ and it doesn't make it through bootup. The lockup (no oops) happens at various places, usually
during a disk-intensive operation like starting PostgreSQL. Disk & chipset detection always goes ok; the lockup is much later in the
boot cycle. Nothing shows up in the logs.
A kernel without TCQ boots reliably.
Boot drive is hda (IBM-DTTA-351680). System is SMP ppro, no preempt.
--Adam
Chipset/disk detection looks like this:
Uniform Multi-Platform E-IDE driver ver.:7.0.0
ide: system bus speed 33MHz
Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]: IDE controller on PCI slot 001
Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]: chipset revision 0
Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]: not 100% native mode: will prr
PIIX: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] MWDMA16 controller on pc1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTTA-351680, ATA DISK drive
hdc: WDC AC21200H, ATA DISK drive
hdd: CD-ROM CDU311, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide: unexpected interrupt
hda: tagged command queueing enabled, command queue depth 8
hda: 33022080 sectors (16907 MB) w/462KiB Cache, CHS=34944/15/63, (U)DMA
ide: unexpected interrupt
hdc: 2503872 sectors (1282 MB) w/128KiB Cache, CHS=2484/16/63, DMA
hdd: ATAPI 8X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
hda: [PTBL] [2055/255/63] hda1 hda2 hda3
hdc: [PTBL] [621/64/63] hdc1
Relevant .config entries:
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_IDE_TCQ=y
CONFIG_BLK_DEV_IDE_TCQ_FULL=y
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
CONFIG_BLK_DEV_PIIX=y
CONFIG_IDEDMA_AUTO=y
next reply other threads:[~2002-04-18 0:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-18 0:11 Adam Kropelin [this message]
2002-04-18 6:14 ` 2.5.8-dj1 with IDE TCQ doesn't survive boot Jens Axboe
2002-04-19 0:45 ` Adam Kropelin
2002-04-19 10:05 ` Martin Dalecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='02e001c1e66d$8e927070$02c8a8c0@kroptech.com' \
--to=akropel1@rochester.rr.com \
--cc=axboe@suse.de \
--cc=davej@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox