From: "Mike Black" <mblack@csihq.com>
To: "linux-kernel@vger.kernel.or" <linux-kernel@vger.kernel.org>
Subject: IDE timeouts 2.4.1
Date: Thu, 1 Feb 2001 09:11:56 -0500 [thread overview]
Message-ID: <03b401c08c58$ef72e930$e1de11cc@csihq.com> (raw)
Happens every night on both hda and hdc -- no sure yet what triggers it but
it is repeatable. Has happened since I've installed this machine with all
the 2.4.x series.
Jan 31 00:34:16 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:16 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:16 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:26 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:26 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:26 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:36 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:36 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:36 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:46 kernel: hdc: timeout waiting for DMA
Jan 31 00:34:46 kernel: ide_dmaproc: chipset supported ide_dma_timeout func
only: 14
Jan 31 00:34:46 kernel: hdc: irq timeout: status=0x58 { DriveReady
SeekComplete DataRequest }
Jan 31 00:34:46 kernel: hdc: DMA disabled
Jan 31 00:34:46 i kernel: ide1: reset: success
2.4.1 on Dual PIII/1G, 4G RAM,
WDC WD450AA-00BAA0
/dev/hda:
Model=WDC WD450AA-00BAA0, FwRev=10.09K11, SerialNo=WD-WMA2E1605263
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=87930864
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master
SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
BIOS Vendor: American Megatrends Inc.
BIOS Version: 0700xx
BIOS Release: 12/12/00
System Vendor: Supermicro.
Product Name: 370DL3/370DLE.
Version 1234567890.
Serial Number 1234567890.
Board Vendor: Supermicro.
Board Name: 370DL3/370DLE.
Board Version: PCB Version.
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD450AA-00BAA0, ATA DISK drive
hdc: WDC WD450AA-60BAA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33)
hdc: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=87233/16/63, UDMA(33)
________________________________________
Michael D. Black Principal Engineer
mblack@csihq.com 321-676-2923,x203
http://www.csihq.com Computer Science Innovations
http://www.csihq.com/~mike My home page
FAX 321-676-2355
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-02-01 14:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-01 14:11 Mike Black [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-02-03 3:48 IDE timeouts 2.4.1 Dunlap, Randy
2001-02-03 4:50 ` Andre Hedrick
2001-02-05 16:31 David Balazic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='03b401c08c58$ef72e930$e1de11cc@csihq.com' \
--to=mblack@csihq.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox