From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] SCSI fixes for 6.7-rc6
Date: Sat, 23 Dec 2023 13:16:49 -0500 [thread overview]
Message-ID: <03b579bec43c7bcdeb4eed7ded859c92f4035461.camel@HansenPartnership.com> (raw)
Four small fixes, three in drivers with the core one adding a batch
indicator (for drivers which use it) to the error handler.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Alexander Atanasov (1):
scsi: core: Always send batch on reset or error handling command
Can Guo (1):
scsi: ufs: core: Let the sq_lock protect sq_tail_slot access
ChanWoo Lee (1):
scsi: ufs: qcom: Return ufs_qcom_clk_scale_*() errors in ufs_qcom_clk_scale_notify()
Wei Yongjun (1):
scsi: bnx2fc: Fix skb double free in bnx2fc_rcv()
And the diffstat:
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 9 +++------
drivers/scsi/scsi_error.c | 2 ++
drivers/ufs/core/ufshcd.c | 3 ++-
drivers/ufs/host/ufs-qcom.c | 6 ++++--
4 files changed, 11 insertions(+), 9 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 05ddbb9bb7d8..451a58e0fd96 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -429,7 +429,6 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev,
struct fcoe_ctlr *ctlr;
struct fcoe_rcv_info *fr;
struct fcoe_percpu_s *bg;
- struct sk_buff *tmp_skb;
interface = container_of(ptype, struct bnx2fc_interface,
fcoe_packet_type);
@@ -441,11 +440,9 @@ static int bnx2fc_rcv(struct sk_buff *skb, struct net_device *dev,
goto err;
}
- tmp_skb = skb_share_check(skb, GFP_ATOMIC);
- if (!tmp_skb)
- goto err;
-
- skb = tmp_skb;
+ skb = skb_share_check(skb, GFP_ATOMIC);
+ if (!skb)
+ return -1;
if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n");
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index c67cdcdc3ba8..1223d34c04da 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1152,6 +1152,7 @@ static enum scsi_disposition scsi_send_eh_cmnd(struct scsi_cmnd *scmd,
scsi_log_send(scmd);
scmd->submitter = SUBMITTED_BY_SCSI_ERROR_HANDLER;
+ scmd->flags |= SCMD_LAST;
/*
* Lock sdev->state_mutex to avoid that scsi_device_quiesce() can
@@ -2459,6 +2460,7 @@ scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
scsi_init_command(dev, scmd);
scmd->submitter = SUBMITTED_BY_SCSI_RESET_IOCTL;
+ scmd->flags |= SCMD_LAST;
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
scmd->cmd_len = 0;
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index bce0d2a9a7f3..16d76325039a 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2274,9 +2274,10 @@ void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag,
if (is_mcq_enabled(hba)) {
int utrd_size = sizeof(struct utp_transfer_req_desc);
struct utp_transfer_req_desc *src = lrbp->utr_descriptor_ptr;
- struct utp_transfer_req_desc *dest = hwq->sqe_base_addr + hwq->sq_tail_slot;
+ struct utp_transfer_req_desc *dest;
spin_lock(&hwq->sq_lock);
+ dest = hwq->sqe_base_addr + hwq->sq_tail_slot;
memcpy(dest, src, utrd_size);
ufshcd_inc_sq_tail(hwq);
spin_unlock(&hwq->sq_lock);
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 96cb8b5b4e66..17e24270477d 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -1516,9 +1516,11 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
err = ufs_qcom_clk_scale_up_pre_change(hba);
else
err = ufs_qcom_clk_scale_down_pre_change(hba);
- if (err)
- ufshcd_uic_hibern8_exit(hba);
+ if (err) {
+ ufshcd_uic_hibern8_exit(hba);
+ return err;
+ }
} else {
if (scale_up)
err = ufs_qcom_clk_scale_up_post_change(hba);
next reply other threads:[~2023-12-23 18:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-23 18:16 James Bottomley [this message]
2023-12-23 20:21 ` [GIT PULL] SCSI fixes for 6.7-rc6 pr-tracker-bot
-- strict thread matches above, loose matches on Subject: below --
2023-12-18 18:43 James Bottomley
2023-12-18 19:24 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03b579bec43c7bcdeb4eed7ded859c92f4035461.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox