public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* Problem with kernel 2.2.19 Ultra-DMA and SMP, once more
@ 2001-06-01 21:40 Magnus.Sandberg
  2001-06-01 22:27 ` Andre Hedrick
  0 siblings, 1 reply; 6+ messages in thread
From: Magnus.Sandberg @ 2001-06-01 21:40 UTC (permalink / raw)
  To: linux-kernel, linux-smp; +Cc: andre, magnus.sandberg

[-- Attachment #1: Type: text/plain, Size: 1155 bytes --]

Hi once more...

I'm sorry for the layout of this mail. It is written in a web mail
system...
The attachements are in ASCII format even if the web-mail make it base-64

Now I have compiled a vanilla 2.2.19 kernel and have SMP working, without
Ultra-DMA. I used the functional kernel config from 2.2.19-ide and just
activated SMP.

>From that I have 3 very simular kernel configurations:
2.2.19 with Hidrick's IDE-patch, no SMP: working
2.2.19 without IDE-patch, with SMP: working
2.2.19 with IDE-patch and SMP: not booting

With all the information I hope that someone can help me with the
IDE-and-SMP
problem.

                                  _\\|//_
                                  (-0-0-)
/-------------------------------ooO-(_)-Ooo------------------------------\
| Magnus Sandberg                    Email: Magnus.Sandberg@bluelabs.se  |
| Network Engineer, Bluelabs                     http://www.bluelabs.se/ |
| Phone: +46-8-470 2155    (FAX: +46-8-470 2199)    GSM: +46-708-225 805 |
\------------------------------------------------------------------------/
                                  ||   ||
                                 ooO   Ooo

[-- Attachment #2: kernel-2.2.19_1st-smp-no_cleanup.config --]
[-- Type: application/octet-stream, Size: 16970 bytes --]

#
# Automatically generated make config: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M686=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# CONFIG_BINFMT_JAVA is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_OTHER is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
# CONFIG_TOSHIBA is not set

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_PARPORT=m

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_IDEDMA_AUTO is not set
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_TRM290=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
CONFIG_BLK_DEV_CS5530=y
# CONFIG_IDE_CHIPSETS is not set

#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_STRIPED=m
CONFIG_MD_MIRRORING=m
CONFIG_MD_RAID5=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_XD=m
CONFIG_BLK_DEV_DAC960=m
CONFIG_PARIDE_PARPORT=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
CONFIG_NETLINK_DEV=m
CONFIG_FIREWALL=y
CONFIG_FILTER=y
CONFIG_UNIX=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_IP_FIREWALL=y
# CONFIG_IP_FIREWALL_NETLINK is not set
# CONFIG_IP_TRANSPARENT_PROXY is not set
CONFIG_IP_MASQUERADE=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_ICMP=y

#
# Protocol-specific masquerading support will be built as modules.
#
CONFIG_IP_MASQUERADE_MOD=y
CONFIG_IP_MASQUERADE_IPAUTOFW=m
CONFIG_IP_MASQUERADE_IPPORTFW=m
CONFIG_IP_MASQUERADE_MFW=m
# CONFIG_IP_ROUTER is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=y
CONFIG_SYN_COOKIES=y

#
# (it is safe to leave these untouched)
#
CONFIG_INET_RARP=m
# CONFIG_SKB_LARGE is not set
CONFIG_IPV6=m
# CONFIG_IPV6_EUI64 is not set
# CONFIG_IPV6_NETLINK is not set

#
#  
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m

#
# SCSI support
#
CONFIG_SCSI=m

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AIC7XXX=m
# CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_PROC_STATS=y
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
CONFIG_SCSI_G_NCR5380_PORT=y
# CONFIG_SCSI_G_NCR5380_MEM is not set
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_SIM710=m
# CONFIG_SCSI_NCR53C7xx is not set
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4
CONFIG_SCSI_NCR53C8XX_SYNC=5
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PAS16=m
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_DEBUG=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_ETHERTAP=m
CONFIG_NET_SB1000=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_RTL8139=m
CONFIG_RTL8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_WAVELAN=m
CONFIG_ARLAN=m

#
# Token ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
CONFIG_RCPCI=m
CONFIG_SHAPER=m

#
# Wan interfaces
#
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_LANMEDIA=m
CONFIG_COMX=m
CONFIG_COMX_HW_COMX=m
CONFIG_COMX_HW_LOCOMX=m
CONFIG_COMX_HW_MIXCOM=m
CONFIG_COMX_PROTO_PPP=m
CONFIG_COMX_PROTO_FR=m
CONFIG_HDLC=m
CONFIG_N2=m
CONFIG_C101=m
CONFIG_WANXL=m
CONFIG_PC300=m
# CONFIG_PC300_X25 is not set
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_XPEED=m
CONFIG_SBNI=m

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
# CONFIG_IRDA_OPTIONS is not set
# CONFIG_IRDA_COMPRESSION is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m

#
# FIR device drivers
#
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=m
# CONFIG_SERIAL_EXTENDED is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_SYNCLINK=m
CONFIG_N_HDLC=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_PRINTER_READBACK is not set
CONFIG_MOUSE=y

#
# Mice
#
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_BUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m

#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
CONFIG_WATCHDOG=y

#
# Watchdog Cards
#
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_ACQUIRE_WDT=m
# CONFIG_ADVANTECH_WDT is not set
CONFIG_PCWATCHDOG=m
# CONFIG_I810_TCO is not set
CONFIG_MIXCOMWD=m
CONFIG_60XX_WDT=m
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDT=m
CONFIG_WDT_501=y
# CONFIG_WDT_501_FAN is not set
CONFIG_WDTPCI=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_INTEL_RNG=m
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_GAMMA=m
CONFIG_DRM_R128=m
CONFIG_DRM_I810=m
CONFIG_DRM_MGA=m

#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DTLK=m

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y

#
# USB Controllers
#
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_USB_WMFORCE=m
CONFIG_USB_WACOM=m
CONFIG_INPUT_EVDEV=m

#
# USB Imaging devices
#
CONFIG_USB_DC2XX=m
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m

#
# USB Network adaptors
#
CONFIG_USB_KAWETH=m
CONFIG_USB_PLUSB=m
CONFIG_USB_PEGASUS=m

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
CONFIG_USB_SERIAL_OMNINET=m

#
# USB misc drivers
#
CONFIG_USB_RIO500=m

#
# Filesystems
#
CONFIG_QUOTA=y
CONFIG_AUTOFS_FS=m
CONFIG_ADFS_FS=m
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_EFS_FS=m
CONFIG_SGI_PARTITION=y

#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFSD is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set

#
# Partition Types
#
CONFIG_BSD_DISKLABEL=y
CONFIG_MAC_PARTITION=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SMD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
# CONFIG_NLS_KOI8_RU is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_VGA16 is not set
CONFIG_VIDEO_SELECT=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_ATY128 is not set
CONFIG_FB_VIRTUAL=m
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB2=m
CONFIG_FBCON_CFB4=m
CONFIG_FBCON_CFB8=m
CONFIG_FBCON_CFB16=m
CONFIG_FBCON_CFB24=m
CONFIG_FBCON_CFB32=m
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
CONFIG_FBCON_VGA=m
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=m
CONFIG_SOUND_CMPCI=m
# CONFIG_SOUND_CMPCI_FM is not set
# CONFIG_SOUND_CMPCI_MIDI is not set
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_EMU10K1=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_MAESTRO=m
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
CONFIG_SOUND_VIA82CXXX=m
CONFIG_SOUND_OSS=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_SB=m
CONFIG_SOUND_GUS=m
# CONFIG_GUS16 is not set
# CONFIG_GUSMAX is not set
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
CONFIG_SOUND_MSS=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_SOFTOSS=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_NM256=m
# CONFIG_SOUND_YMFPCI is not set

#
# Additional low level sound drivers
#
CONFIG_LOWLEVEL_SOUND=y
CONFIG_ACI_MIXER=m
CONFIG_AWE32_SYNTH=m
CONFIG_AEDSP16=m
CONFIG_AEDSP16_BASE=220
CONFIG_MPU_BASE=330

#
# SC-6600 Audio Cards have no jumper switches at all
#
# CONFIG_SC6600 is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_MPU401 is not set

#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set

[-- Attachment #3: boot-log-2.2.19-smp-no_ide.txt --]
[-- Type: application/octet-stream, Size: 6387 bytes --]

Linux version 2.2.19-smp (root@debian) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Fri Jun 1 22:41:04 CEST 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 0fef0000 @ 00100000 (usable)
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 801842 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1599.07 BogoMIPS
Memory: 257804k/262080k available (920k kernel code, 420k reserved, 2860k data, 76k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
256K L2 cache (8 way)
CPU: L2 Cache: 256K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
per-CPU timeslice cutoff: 50.04 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 03
calibrating APIC timer ... 
..... CPU clock speed is 801.8353 MHz.
..... system bus clock speed is 133.6390 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 1602.35 BogoMIPS
Intel machine check reporting enabled on CPU#1.
256K L2 cache (8 way)
CPU: L2 Cache: 256K
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3201.43 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-15, 2-20, 2-21, 2-22, 2-23 not connected.
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 000 00  0    0    0   0   0    1    1    59
 02 0FF 0F  0    0    0   0   0    1    1    51
 03 000 00  0    0    0   0   0    1    1    61
 04 000 00  0    0    0   0   0    1    1    69
 05 000 00  1    0    0   0   0    0    0    00
 06 000 00  0    0    0   0   0    1    1    71
 07 000 00  0    0    0   0   0    1    1    79
 08 000 00  0    0    0   0   0    1    1    81
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  0    0    0   0   0    1    1    89
 0b 000 00  1    0    0   0   0    0    0    00
 0c 000 00  0    0    0   0   0    1    1    91
 0d 000 00  1    0    0   0   0    0    0    00
 0e 000 00  0    0    0   0   0    1    1    99
 0f 000 00  1    0    0   0   0    0    0    00
 10 0FF 0F  1    1    0   1   0    1    1    A1
 11 0FF 0F  1    1    0   1   0    1    1    A9
 12 0FF 0F  1    1    0   1   0    1    1    B1
 13 0FF 0F  1    1    0   1   0    1    1    B9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ10 -> 10
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
checking TSC synchronization across CPUs: passed.
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb2d0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I7,P3) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 18
PCI->APIC IRQ transform: (B0,I15,P0) -> 17
PCI->APIC IRQ transform: (B0,I16,P0) -> 18
PCI->APIC IRQ transform: (B0,I17,P0) -> 19
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
hda: FUJITSU MPG3102AH, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: FUJITSU MPG3102AH, 9541MB w/2048kB Cache, CHS=1216/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
apm: disabled - APM is not SMP safe.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 498004k swap-space (priority -1)
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0xe800, IRQ 18, 00:48:54:53:a2:fa.
ncr53c8xx: at PCI bus 0, device 17, function 0
ncr53c8xx: 53c810 detected 
ncr53c810-0: rev 0x2 on pci bus 0 device 17 function 0 irq 19
ncr53c810-0: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.1-20000726
scsi : 1 host.
  Vendor: PIONEER   Model: DVD-ROM DVD-303   Rev: 1.09
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
ncr53c810-0-<2,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 8)
sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Problem with kernel 2.2.19 Ultra-DMA and SMP, once more
@ 2001-06-02 12:04 Magnus.Sandberg
  2001-06-02 16:21 ` Alan Cox
  0 siblings, 1 reply; 6+ messages in thread
From: Magnus.Sandberg @ 2001-06-02 12:04 UTC (permalink / raw)
  To: Andre Hedrick; +Cc: magnus.sandberg, linux-kernel, linux-smp


Hi Andre,

The motherboard has VIA-chipset.

What does this mean for me?

Will the APIC-problems be solved in the future or do I have to deside upon
running "noapic" semi-crippled or not run Ultra-DMA?


                                  _\\|//_
                                  (-0-0-)
/-------------------------------ooO-(_)-Ooo------------------------------\
| Magnus Sandberg                    Email: Magnus.Sandberg@bluelabs.se  |
| Network Engineer, Bluelabs                     http://www.bluelabs.se/ |
| Phone: +46-8-470 2155    (FAX: +46-8-470 2199)    GSM: +46-708-225 805 |
\------------------------------------------------------------------------/
                                  ||   ||
                                 ooO   Ooo


 ----- On 1st of June 2001 Andre Hedrick wrote; -----

If this is a VIA SMP system there are APIC problems that you do not want
to even think about addressing.

MPS1.1 and passing "noapic" will fix most of there mess, but you have a
semi-crippled system, but it runs.

On Fri, 1 Jun 2001 Magnus.Sandberg@bluelabs.se wrote:

> Hi once more...
>
> I'm sorry for the layout of this mail. It is written in a web mail
> system...
> The attachements are in ASCII format even if the web-mail make it base-64
>
> Now I have compiled a vanilla 2.2.19 kernel and have SMP working, without
> Ultra-DMA. I used the functional kernel config from 2.2.19-ide and just
> activated SMP.
>
> >From that I have 3 very simular kernel configurations:
> 2.2.19 with Hidrick's IDE-patch, no SMP: working
> 2.2.19 without IDE-patch, with SMP: working
> 2.2.19 with IDE-patch and SMP: not booting
>
> With all the information I hope that someone can help me with the
> IDE-and-SMP problem.


^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Problem with kernel 2.2.19 Ultra-DMA and SMP, once more
@ 2001-06-03 18:00 Magnus.Sandberg
  0 siblings, 0 replies; 6+ messages in thread
From: Magnus.Sandberg @ 2001-06-03 18:00 UTC (permalink / raw)
  To: Mark Hahn, Shane Wegner, Alan Cox
  Cc: Andre Hedrick, magnus.sandberg, linux-kernel, linux-smp


Hi,

I guess there are no simple answers... Below I have 3 different answers to
my
previous questions. As they relate to the same problem,I descided to put
them togheter in this mail.

Mark Hahn don't realy seams to agree with Andre about if noapic is
crippling
the system or not.

Alan Cox says that VIA and SMP are not supported for the moment by 2.2.
What does that mean? Can I use it at all or do I risk to get hardware
damage
of my motherboard or just an unstable system?

Shane Wegner seams to have some sort of work-around by mixing new and old
versions of IDE-patch.


>From all this I have a new three-stage question;

Is it just luck that Shane got it working?
Or do I have to wait for 2.2.20 or go for 2.4 (which I'm not mentally
prepered for...)?
Or how crippled is a system without APIC?

                                  _\\|//_
                                  (-0-0-)
/-------------------------------ooO-(_)-Ooo------------------------------\
| Magnus Sandberg                    Email: Magnus.Sandberg@bluelabs.se  |
| Network Engineer, Bluelabs                     http://www.bluelabs.se/ |
| Phone: +46-8-470 2155    (FAX: +46-8-470 2199)    GSM: +46-708-225 805 |
\------------------------------------------------------------------------/
                                  ||   ||
                                 ooO   Ooo



 ----- On 2nd of June 2001 Mark Hahn wrote; -----

> Will the APIC-problems be solved in the future or do I have to deside
upon
> running "noapic" semi-crippled or not run Ultra-DMA?

noapic is *not* semi-crippled.  it may even be faster than apic mode.
turning off udma, though, that's definitely crippling.



 ----- On 2nd of June 2001 Alan Cox wrote; -----

> Hi Andre,
> The motherboard has VIA-chipset.

2.2 does not support VIA SMP. 2.4 should get it right. 2.2.20 may support
it
but I'm working on a 3 month schedule for 2.2.20



 ----- On 3rd of June 2001 Shane Wegner wrote; -----

On Fri, Jun 01, 2001 at 10:03:47PM +0200, Magnus.Sandberg@bluelabs.se
wrote:

> Hi again,
>
> Earlier today I wrote about my SMP and Ultra-DMA problem. Now have I
> written down the boot information. I hope that the attachment show the
> correct information, it was written in W*rd so some lower case chars can
> have been converted into upper case...
>
> I also checked the IDE-patch and the filename was
> kernel-patch-2.2.19-ide_20010325-1.tar.gz.
> Could a newer IDE-patch handle SMP better than this one?

Not presently however an older one can.  I posted on this a
few weeks back and what worked for me was to get the IDE
patch ide-2.2.19.05042001 from
ftp.kernel.org/pub/linux/kernel/people/hedrick/ide-2.2.19.
That is the most recent as of this writing.  Then replace
the via82cxxx.c driver which that created by patching
2.2.18 with ide-2.2.18.1221.

This allowed me to boot fine with VIA SMP and everything
works well.

Regards,
Shane


^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2001-06-03 19:47 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-06-01 21:40 Problem with kernel 2.2.19 Ultra-DMA and SMP, once more Magnus.Sandberg
2001-06-01 22:27 ` Andre Hedrick
2001-06-01 23:04   ` Juha Saarinen
  -- strict thread matches above, loose matches on Subject: below --
2001-06-02 12:04 Magnus.Sandberg
2001-06-02 16:21 ` Alan Cox
2001-06-03 18:00 Magnus.Sandberg

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox