public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Richard Purdie" <rpurdie@rpsys.net>
To: "Andrew Morton" <akpm@osdl.org>
Cc: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
	"Dominik Brodowski" <linux@brodo.de>
Subject: Re: 2.6.12-rc3-mm1
Date: Sat, 30 Apr 2005 23:03:51 +0100	[thread overview]
Message-ID: <04fa01c54dd0$84651300$0f01a8c0@max> (raw)
In-Reply-To: 20050430124943.7648ed86.akpm@osdl.org

Andrew Morton:
> It'd be very useful if you could test this on 2.6.12-rc3, please.

I can confirm that exactly the same happens with 2.6.12-rc3.

> "Richard Purdie" <rpurdie@rpsys.net> wrote:
>>
>> ...
>> The config I'm using is at http://www.rpsys.net/openzaurus/defconfig-c7x0
>> if needed.
>>
>> I'm also seeing problems with CompactFlash cards (I also saw this with
>> 2.6.12-rc2-mm3, other versions are untested). I'm using pcmcia-cs (not
>> pcmciautils) but that shouldn't be a problem as I understand things. The
>> card mounts fine as the machine boots and I can access it fine. Trying to
>> eject the card causes problems:
>>
>> Normally I can execute "cardctl eject" and then remove the card. I
>> trigger
>> the oops below however I try to eject the card under this kernel though.
>> (Note: I never physically remove it here although that will also trigger
>> an
>> oops). I suspect this is a further problem with ide-cs (which nobody has
>> both the knowledge and time to fix) although I'm open to advice as to
>> where
>> the fault lies:
>>
>> root@c7x0:~# cardcmgr
>> cardmgr[1932]: watching 1 socket
>> root@c7x0:~# hda: Flash Card, CFA DISK drive
>> ide0 at 0xc2860000-0xc2860007,0xc286000e on irq 40
>> hda: max request size: 128KiB
>> hda: 254464 sectors (130 MB) w/0KiB Cache, CHS=994/8/32
>> hda: cache flushes not supported
>>  hda: hda1
>> ide-cs: hda: Vcc = 3.3, Vpp = 0.0
>>  hda: hda1
>>
>> [drive gets automounted]
>>
>> root@c7x0:~# umount /dev/hda1
>> root@c7x0:~# cardctl eject
>> Unable to handle kernel NULL pointer dereference at virtual address
>> 00000010
>> pgd = c17ec000
>> [00000010] *pgd=a17a8031, *pte=00000000, *ppte=00000000
>> Internal error: Oops: 17 [#1]
>> Modules linked in:
>> CPU: 0
>> PC is at ide_drive_remove+0x1c/0x28
>> LR is at ide_drive_remove+0x20/0x28
>> pc : [<c0153b18>]    lr : [<c0153b1c>]    Not tainted
>> sp : c1685cb8  ip : c1685cc8  fp : c1685cc4
>> r10: c03ee404  r9 : c029b6e8  r8 : 00000000
>> r7 : c029b8c0  r6 : c029b908  r5 : c0254ad0  r4 : c029b860
>> r3 : 00000000  r2 : c029b778  r1 : 00000003  r0 : c029b778
>> Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment user
>> Control: 397F  Table: A17EC000  DAC: 00000015
>> Process cardctl (pid: 2108, stack limit = 0xc1684194)
>> Stack: (0xc1685cb8 to 0xc1686000)
>> 5ca0:                                                       c1685ce4
>> c1685cc8
>> 5cc0: c012e4a4 c0153b08 c029b860 c029bc90 c029b8c0 c0254650 c1685d04
>> c1685ce8
>> 5ce0: c012dd38 c012e3f4 c029b860 c029bc90 c029b8c0 00000000 c1685d20
>> c1685d08
>> [stack snipped]
>> Backtrace:
>> [<c0153afc>] (ide_drive_remove+0x0/0x28) from [<c012e4a4>]
>> (device_release_driver+0xbc/0xc4)
>> [<c012e3e8>] (device_release_driver+0x0/0xc4) from [<c012dd38>]
>> (bus_remove_device+0x5c/0xa8)
>>  r7 = C0254650  r6 = C029B8C0  r5 = C029BC90  r4 = C029B860
>> [<c012dcdc>] (bus_remove_device+0x0/0xa8) from [<c012ce30>]
>> (device_del+0x40/0x80)
>>  r7 = 00000000  r6 = C029B8C0  r5 = C029BC90  r4 = C029B860
>> [<c012cdf0>] (device_del+0x0/0x80) from [<c012ce84>]
>> (device_unregister+0x14/0x20)
>>  r6 = 00000000  r5 = C03DD3A0  r4 = C029B860
>> [<c012ce70>] (device_unregister+0x0/0x20) from [<c0151f04>]
>> (ide_unregister+0x6d0/0x8b0)
>>  r4 = C029B778
>> [<c0151834>] (ide_unregister+0x0/0x8b0) from [<c015f270>]
>> (ide_release+0x64/0x68)
>> [<c015f20c>] (ide_release+0x0/0x68) from [<c015f4f4>]
>> (ide_event+0xd4/0x674)
>>  r5 = C1685E0C  r4 = C1C10200
>> [<c015f420>] (ide_event+0x0/0x674) from [<c016fd18>]
>> (send_event_callback+0x64/0x6c)
>> [<c016fcb4>] (send_event_callback+0x0/0x6c) from [<c012db38>]
>> (bus_for_each_dev+0x60/0x8c)
>>  r4 = 00000000
>> [<c012dad8>] (bus_for_each_dev+0x0/0x8c) from [<c016fd50>]
>> (send_event+0x30/0x40)
>>  r7 = 00000001  r6 = 00000001  r5 = 00000001  r4 = 00000008
>> [<c016fd20>] (send_event+0x0/0x40) from [<c0170128>]
>> (ds_event+0xc0/0x210)
>> [<c0170068>] (ds_event+0x0/0x210) from [<c016aa64>]
>> (send_event+0xd0/0x154)
>> [<c016a994>] (send_event+0x0/0x154) from [<c016ac8c>]
>> (socket_shutdown+0x18/0xfc)
>>  r7 = 00000000  r6 = 00000000  r5 = C03EE404  r4 = C03EE404
>> [<c016ac74>] (socket_shutdown+0x0/0xfc) from [<c016b424>]
>> (socket_remove+0x14/0xa0)
>>  r6 = 00000000  r5 = C03EE404  r4 = C03EE404
>> [<c016b410>] (socket_remove+0x0/0xa0) from [<c016bac4>]
>> (pcmcia_eject_card+0x94/0x98)
>>  r5 = C03EE404  r4 = C03EE530
>> [<c016ba30>] (pcmcia_eject_card+0x0/0x98) from [<c0172db0>]
>> (ds_ioctl+0xa30/0xc14)
>>  r6 = C03EE404  r5 = 0000640E  r4 = 00000000
>> [<c0172380>] (ds_ioctl+0x0/0xc14) from [<c0095fa0>] (do_ioctl+0x6c/0xa0)
>> [<c0095f34>] (do_ioctl+0x0/0xa0) from [<c0096068>] (vfs_ioctl+0x94/0x328)
>>  r7 = 00000000  r6 = 00000000  r5 = 00000003  r4 = C1BFFC80
>> [<c0095fd4>] (vfs_ioctl+0x0/0x328) from [<c009633c>]
>> (sys_ioctl+0x40/0x64)
>>  r8 = C001CFA4  r7 = 00000036  r6 = 0000640E  r5 = FFFFFFF7
>>  r4 = C1BFFC80
>> [<c00962fc>] (sys_ioctl+0x0/0x64) from [<c001ce20>]
>> (ret_fast_syscall+0x0/0x2c)
>>  r6 = BECC8D90  r5 = 00000000  r4 = 00000000
>> Code: e24020e8 e1a00002 e592301c e1a0e00f (e593f010)
>>
>> ------------------------------------------------------
>>
>> root@c7x0:~# cardmgr
>> cardmgr[1956]: watching 1 socket
>> root@c7x0:~# hda: Flash Card, CFA DISK drive
>> ide0 at 0xc2860000-0xc2860007,0xc286000e on irq 40
>> hda: max request size: 128KiB
>> hda: 254464 sectors (130 MB) w/0KiB Cache, CHS=994/8/32
>> hda: cache flushes not supported
>>  hda: hda1
>> ide-cs: hda: Vcc = 3.3, Vpp = 0.0
>>  hda: hda1
>>
>> root@c7x0:~# cardctl eject
>>
>> hda: status timeout: status=0x88 { Busy }
>>
>> ide: failed opcode was: 0xec
>> hda: drive not ready for command
>> hda: status timeout: status=0x88 { Busy }
>>
>> ide: failed opcode was: 0xec
>> hda: drive not ready for command
>> hda: status timeout: status=0x88 { Busy }
>>
>> ide: failed opcode was: 0xec
>> hda: drive not ready for command
>>
>> root@c7x0:~# cardctl insert
>> root@c7x0:~# Unable to handle kernel NULL pointer dereference at virtual
>> address 00000010
>> pgd = c1280000
>> [00000010] *pgd=a1250031, *pte=00000000, *ppte=00000000
>> Internal error: Oops: 17 [#1]
>> Modules linked in:
>> CPU: 0
>> PC is at ide_drive_remove+0x1c/0x28
>> LR is at ide_drive_remove+0x20/0x28
>> pc : [<c0153b18>]    lr : [<c0153b1c>]    Not tainted
>> sp : c113fbb4  ip : c113fbc4  fp : c113fbc0
>> r10: 00000000  r9 : c029b6e8  r8 : c029b6e8
>> r7 : c029b8c0  r6 : c029b908  r5 : c0254ad0  r4 : c029b860
>> r3 : 00000000  r2 : c029b778  r1 : 00000003  r0 : c029b778
>> Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  Segment user
>> Control: 397F  Table: A1280000  DAC: 00000015
>> Process cardmgr (pid: 1957, stack limit = 0xc113e194)
>> Stack: (0xc113fbb4 to 0xc1140000)
>> fba0:                                              c113fbe0 c113fbc4
>> c012e4a4
>> fbc0: c0153b08 c029b860 c029bc90 c029b8c0 c0254650 c113fc00 c113fbe4
>> c012dd38
>> fbe0: c012e3f4 c029b860 c029bc90 c029b8c0 00000000 c113fc1c c113fc04
>> c012ce30
>> [stack snipped]
>> Backtrace:
>> [<c0153afc>] (ide_drive_remove+0x0/0x28) from [<c012e4a4>]
>> (device_release_driver+0xbc/0xc4)
>> [<c012e3e8>] (device_release_driver+0x0/0xc4) from [<c012dd38>]
>> (bus_remove_device+0x5c/0xa8)
>>  r7 = C0254650  r6 = C029B8C0  r5 = C029BC90  r4 = C029B860
>> [<c012dcdc>] (bus_remove_device+0x0/0xa8) from [<c012ce30>]
>> (device_del+0x40/0x80)
>>  r7 = 00000000  r6 = C029B8C0  r5 = C029BC90  r4 = C029B860
>> [<c012cdf0>] (device_del+0x0/0x80) from [<c012ce84>]
>> (device_unregister+0x14/0x20)
>>  r6 = 00000000  r5 = C03DB0A0  r4 = C029B860
>> [<c012ce70>] (device_unregister+0x0/0x20) from [<c0151f04>]
>> (ide_unregister+0x6d0/0x8b0)
>>  r4 = C029B778
>> [<c0151834>] (ide_unregister+0x0/0x8b0) from [<c0152310>]
>> (ide_register_hw_with_fixup+0x1b8/0x1ec)
>> [<c0152158>] (ide_register_hw_with_fixup+0x0/0x1ec) from [<c015f200>]
>> (idecs_register+0xa4/0xb0)
>> [<c015f15c>] (idecs_register+0x0/0xb0) from [<c015f8c4>]
>> (ide_event+0x4a4/0x674)
>>  r7 = C286000E  r6 = C1C00460  r5 = C1F72A14  r4 = 00000000
>> [<c015f420>] (ide_event+0x0/0x674) from [<c016ffc0>]
>> (pcmcia_register_client+0x260/0x308)
>> [<c016fd60>] (pcmcia_register_client+0x0/0x308) from [<c015f3dc>]
>> (ide_attach+0xb8/0xfc)
>> [<c015f324>] (ide_attach+0x0/0xfc) from [<c016edb0>]
>> (pcmcia_device_probe+0xc0/0x18c)
>>  r6 = C1F72A60  r5 = C0254BF0  r4 = C1F72A00
>> [<c016ecf0>] (pcmcia_device_probe+0x0/0x18c) from [<c012e230>]
>> (driver_probe_device+0x4c/0xb0)
>>  r8 = 00000050  r7 = C012E294  r6 = 00000000  r5 = C0254C00
>>  r4 = C1F72A60
>> [<c012e1e4>] (driver_probe_device+0x0/0xb0) from [<c012dbc4>]
>> (bus_for_each_drv+0x60/0x8c)
>>  r6 = C1F72A60  r5 = C113FE60  r4 = 00000000
>> [<c012db64>] (bus_for_each_drv+0x0/0x8c) from [<c012e334>]
>> (device_attach+0x8c/0x98)
>>  r7 = C012DF2C  r6 = C113FEE4  r5 = C1F72B08  r4 = C1F72A60
>> [<c012e2a8>] (device_attach+0x0/0x98) from [<c012df54>]
>> (bus_rescan_devices_helper+0x28/0x40)
>>  r5 = C113FEB8  r4 = C113FEE4
>> [<c012df2c>] (bus_rescan_devices_helper+0x0/0x40) from [<c012db38>]
>> (bus_for_each_dev+0x60/0x8c)
>>  r4 = 00000000
>> [<c012dad8>] (bus_for_each_dev+0x0/0x8c) from [<c012df90>]
>> (bus_rescan_devices+0x24/0x30)
>>  r7 = 0001C070  r6 = C1F72A00  r5 = C050643C  r4 = C03EC530
>> [<c012df6c>] (bus_rescan_devices+0x0/0x30) from [<c0172c84>]
>> (ds_ioctl+0x904/0xc14)
>> [<c0172380>] (ds_ioctl+0x0/0xc14) from [<c0095fa0>] (do_ioctl+0x6c/0xa0)
>> [<c0095f34>] (do_ioctl+0x0/0xa0) from [<c0096068>] (vfs_ioctl+0x94/0x328)
>>  r7 = 00000000  r6 = 0001C070  r5 = 00000004  r4 = C1312800
>> [<c0095fd4>] (vfs_ioctl+0x0/0x328) from [<c009633c>]
>> (sys_ioctl+0x40/0x64)
>>  r8 = C001CFA4  r7 = 00000036  r6 = C050643C  r5 = FFFFFFF7
>>  r4 = C1312800
>> [<c00962fc>] (sys_ioctl+0x0/0x64) from [<c001ce20>]
>> (ret_fast_syscall+0x0/0x2c)
>>  r6 = 00034738  r5 = 00000001  r4 = 00000001
>> Code: e24020e8 e1a00002 e592301c e1a0e00f (e593f010)
>>
>> Regards,
>>
>> Richard
>
>


  reply	other threads:[~2005-04-30 22:05 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-30  6:16 2.6.12-rc3-mm1 Andrew Morton
2005-04-30  9:40 ` 2.6.12-rc3-mm1 Brice Goglin
2005-04-30 10:30 ` 2.6.12-rc3-mm1 Brice Goglin
2005-04-30 10:38   ` 2.6.12-rc3-mm1 Andrew Morton
2005-04-30 11:10 ` 2.6.12-rc3-mm1 Alexander Nyberg
2005-04-30 11:26   ` 2.6.12-rc3-mm1 Andrew Morton
2005-04-30 11:52 ` [-mm patch] SIS900 must select MII Adrian Bunk
2005-05-01 16:43   ` Daniele Venzano
2005-05-15 22:24   ` Jeff Garzik
2005-04-30 12:27 ` 2.6.12-rc3-mm1 Ed Tomlinson
2005-04-30 22:08   ` 2.6.12-rc3-mm1 Valdis.Kletnieks
2005-04-30 22:36   ` 2.6.12-rc3-mm1 Zwane Mwaikambo
2005-04-30 22:51     ` 2.6.12-rc3-mm1 Jesper Juhl
2005-04-30 22:53     ` 2.6.12-rc3-mm1 Ed Tomlinson
2005-04-30 23:05       ` 2.6.12-rc3-mm1 Zwane Mwaikambo
2005-04-30 23:10         ` 2.6.12-rc3-mm1 Randy.Dunlap
2005-05-01 13:09           ` 2.6.12-rc3-mm1 Ed Tomlinson
2005-05-01 13:30             ` 2.6.12-rc3-mm1 Adrian Bunk
2005-05-02 15:28               ` 2.6.12-rc3-mm1 Valdis.Kletnieks
2005-05-02 15:49                 ` 2.6.12-rc3-mm1 Randy.Dunlap
2005-05-02 16:11                   ` 2.6.12-rc3-mm1 Valdis.Kletnieks
2005-05-02 22:20                     ` 2.6.12-rc3-mm1 Andrew Morton
2005-05-02 22:39                       ` 2.6.12-rc3-mm1 Olivier Galibert
2005-05-03  0:34                       ` 2.6.12-rc3-mm1 Randy.Dunlap
2005-05-02 22:41                 ` 2.6.12-rc3-mm1 Frank Sorenson
2005-05-03 16:02                   ` 2.6.12-rc3-mm1 Bill Davidsen
2005-05-01 13:19       ` 2.6.12-rc3-mm1 Adrian Bunk
2005-04-30 12:46 ` 2.6.12-rc3-mm1 doesn't boot Adrian Bunk
2005-04-30 12:57   ` Carlos Martin
2005-04-30 13:25 ` 2.6.12-rc3-mm1 Alexander Nyberg
2005-04-30 13:50   ` 2.6.12-rc3-mm1 Adrian Bunk
2005-04-30 14:07 ` 2.6.12-rc3-mm1 Richard Purdie
2005-04-30 15:04   ` 2.6.12-rc3-mm1 Russell King
2005-04-30 19:49   ` 2.6.12-rc3-mm1 Andrew Morton
2005-04-30 22:03     ` Richard Purdie [this message]
2005-04-30 14:20 ` 2.6.12-rc3-mm1 Adrian Bunk
2005-04-30 16:43   ` 2.6.12-rc3-mm1 Zwane Mwaikambo
2005-04-30 17:05     ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-04-30 18:08       ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-04-30 18:56         ` 2.6.12-rc3-mm1 Adrian Bunk
2005-04-30 19:46         ` 2.6.12-rc3-mm1 Andrew Morton
2005-04-30 20:01           ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-05-08  3:53           ` 2.6.12-rc3-mm1 Li Shaohua
2005-04-30 18:30   ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-04-30 18:58     ` 2.6.12-rc3-mm1 Adrian Bunk
2005-04-30 15:29 ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-04-30 15:39   ` 2.6.12-rc3-mm1 Zwane Mwaikambo
2005-04-30 15:44     ` 2.6.12-rc3-mm1 Brice Goglin
2005-04-30 16:02       ` 2.6.12-rc3-mm1 Zwane Mwaikambo
2005-04-30 15:48     ` 2.6.12-rc3-mm1 Carlos Martin
2005-04-30 15:48     ` 2.6.12-rc3-mm1 Coywolf Qi Hunt
2005-04-30 23:34 ` 2.6.12-rc3-mm1 (a-new-10gb-ethernet-driver-by-chelsio-communications.patch) Alexey Dobriyan
  -- strict thread matches above, loose matches on Subject: below --
2005-05-01  8:49 2.6.12-rc3-mm1 Li, Shaohua
     [not found] <fa.gbejpad.1vj8f9r@ifi.uio.no>
2005-05-03  9:00 ` 2.6.12-rc3-mm1 Reuben Farrelly
2005-05-03  9:07   ` 2.6.12-rc3-mm1 Andrew Morton
2005-05-03  9:49     ` 2.6.12-rc3-mm1 Reuben Farrelly

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='04fa01c54dd0$84651300$0f01a8c0@max' \
    --to=rpurdie@rpsys.net \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@brodo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox