From: "Sönke Ruempler" <ruempler@topconcepts.com>
To: <linux-kernel@vger.kernel.org>
Subject: reiserfs bug
Date: Thu, 28 Nov 2002 09:28:47 +0100 [thread overview]
Message-ID: <072801c296b8$2cb01000$6600a8c0@topconcepts.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 10543 bytes --]
kernel oops while writing through sbp2 to ieee1394 ide reiserfs-formated
device
i am NOT on the list, pls CC me!
trace:
kernel BUG at prints.c:334!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c0174d69>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282
eax: 00000024 ebx: c0259c00 ecx: cf51a000 edx: cf51bf64
esi: cc7f6c00 edi: ce2cb6c0 ebp: 00000003 esp: c12f1ea0
ds: 0018 es: 0018 ss: 0018
Process kupdated (pid: 7, stackpage=c12f1000)
Stack: c024e755 c02e0120 c0259c00 c12f1ec4 d0923830 00000000 c017f13d
cc7f6c00
c0259c00 00000000 00000014 ce2cb6c0 d093aaf4 c0131268 c023fa4d
cb66a000
d0923000 00000013 00000010 00000004 c0182b4b cc7f6c00 d0923830
00000001
Call Trace: [<c017f13d>] [<c0131268>] [<c023fa4d>] [<c0182b4b>]
[<c0181d40>]
[<c0181d4e>] [<c01725d5>] [<c0133eee>] [<c01334bc>] [<c013374c>]
[<c0105000>]
[<c0105000>] [<c0106ff6>] [<c0133670>]
Code: 0f 0b 4e 01 e2 0f 25 c0 85 f6 68 20 01 2e c0 74 0d 0f b7 46
>>EIP; c0174d69 <reiserfs_panic+29/60> <=====
Trace; c017f13d <flush_commit_list+2bd/3b0>
Trace; c0131268 <getblk+18/40>
Trace; c023fa4d <_mmx_memcpy+4d/150>
Trace; c0182b4b <do_journal_end+7eb/af0>
Trace; c0181d40 <flush_old_commits+130/160>
Trace; c0181d4e <flush_old_commits+13e/160>
Trace; c01725d5 <reiserfs_write_super+15/20>
Trace; c0133eee <sync_supers+be/e0>
Trace; c01334bc <sync_old_buffers+c/40>
Trace; c013374c <kupdate+dc/100>
Trace; c0105000 <_stext+0/0>
Trace; c0105000 <_stext+0/0>
Trace; c0106ff6 <kernel_thread+26/30>
Trace; c0133670 <kupdate+0/100>
Code; c0174d69 <reiserfs_panic+29/60>
00000000 <_EIP>:
Code; c0174d69 <reiserfs_panic+29/60> <=====
0: 0f 0b ud2a <=====
Code; c0174d6b <reiserfs_panic+2b/60>
2: 4e dec %esi
Code; c0174d6c <reiserfs_panic+2c/60>
3: 01 e2 add %esp,%edx
Code; c0174d6e <reiserfs_panic+2e/60>
5: 0f 25 (bad)
Code; c0174d70 <reiserfs_panic+30/60>
7: c0 85 f6 68 20 01 2e rolb $0x2e,0x12068f6(%ebp)
Code; c0174d77 <reiserfs_panic+37/60>
e: c0 (bad)
Code; c0174d78 <reiserfs_panic+38/60>
f: 74 0d je 1e <_EIP+0x1e> c0174d87
<reiserfs_panic+47/60>
Code; c0174d7a <reiserfs_panic+3a/60>
11: 0f b7 46 00 movzwl 0x0(%esi),%eax
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux blah 2.4.19 #1 Die Aug 13 10:01:16 CEST 2002 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
reiserfsprogs 3.x.0j
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded sbp2 smbfs nls_iso8859-1 isofs lp
Linux version 2.4.19 (root@blah) (gcc version 2.96 20000731 (Red Hat Linux
7.1 2.96-98)) #1 Die Aug 13 10:01:16 CEST 2002
cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 3
model name : AMD Duron(tm) Processor
stepping : 1
cpu MHz : 706.989
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36
mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 1409.02
modules:
sbp2 15904 1
smbfs 32144 1 (autoclean)
nls_iso8859-1 2832 0 (autoclean)
isofs 17296 0 (autoclean)
lp 5968 0 (autoclean)
ipports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0140-015f : aha152x
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus #01
d800-d803 : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
da00-da1f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
da00-da1e : b1pci-da00
dc00-dc3f : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
de00-deff : Macronix, Inc. [MXIC] MX987x5
de00-deff : tulip
f000-f00f : Advanced Micro Devices [AMD] AMD-756 [Viper] IDE
f000-f007 : ide0
f008-f00f : ide1
iomem:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-0024371c : Kernel code
0024371d-002978bf : Kernel data
0fff0000-0fff7fff : ACPI Tables
0fff8000-0fffffff : ACPI Non-volatile Storage
e6c00000-e6cfffff : PCI Bus #01
e8000000-ebffffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eedff000-eedfffff : Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller
eee00000-eeefffff : PCI Bus #01
ef7e8000-ef7ebfff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ee000-ef7eefff : Advanced Micro Devices [AMD] AMD-756 [Viper] USB
ef7ef000-ef7ef7ff : Texas Instruments TSB12LV26 IEEE-1394 Controller (Link)
ef7ef000-ef7ef7ff : ohci1394
ef7efec0-ef7efeff : AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
ef7eff00-ef7effff : Macronix, Inc. [MXIC] MX987x5
ef7eff00-ef7effff : tulip
ef800000-efffffff : S3 Inc. 86c764/765 [Trio32/64/64V+]
ffff0000-ffffffff : reserved
lspci -vvv:
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller (rev 25)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 120
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at eedff000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at d800 [disabled] [size=4]
Capabilities: [a0] AGP version 1.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x1
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 120
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: eee00000-eeefffff
Prefetchable memory behind bridge: e6c00000-e6cfffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev
07) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB
(rev 06) (prog-if 10 [OHCI])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 12
Region 0: Memory at ef7ee000 (32-bit, non-prefetchable) [size=4K]
00:08.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH
B1 ISDN (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at ef7efec0 (32-bit, non-prefetchable) [size=64]
Region 1: I/O ports at dc00 [size=64]
Region 2: I/O ports at da00 [size=32]
00:09.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020
(prog-if 10 [OHCI])
Subsystem: Texas Instruments: Unknown device 8010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at ef7ef000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at ef7e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 20)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at de00 [size=256]
Region 1: Memory at ef7eff00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ef7d0000 [disabled] [size=64K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1+,D2-,D3hot-,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: Memory at ef800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at ef7f0000 [disabled] [size=64K]
have fun!
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2436 bytes --]
next reply other threads:[~2002-11-28 8:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-28 8:28 Sönke Ruempler [this message]
2002-11-28 8:47 ` reiserfs bug Oleg Drokin
2002-11-28 8:50 ` Sonke Ruempler
2002-11-28 8:57 ` Oleg Drokin
2002-11-28 9:04 ` Sonke Ruempler
2002-11-28 9:09 ` Oleg Drokin
2002-11-28 9:12 ` Sonke Ruempler
2002-11-28 9:13 ` Henning P. Schmiedehausen
2002-11-28 10:03 ` Oleg Drokin
-- strict thread matches above, loose matches on Subject: below --
2005-01-22 23:26 Pablo Barbáchano
2005-01-23 11:13 ` Pablo Barbáchano
2004-07-01 6:09 Hongwei Li
2004-07-01 20:44 ` Oleg Drokin
2004-10-05 15:01 ` Vladimir Saveliev
2001-10-08 16:44 ReiserFS Bug Aleksander Adamowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='072801c296b8$2cb01000$6600a8c0@topconcepts.net' \
--to=ruempler@topconcepts.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox