* Re: Linux 2.6.29-rc3 @ 2009-01-28 23:16 Hubert Tonneau 0 siblings, 0 replies; 3+ messages in thread From: Hubert Tonneau @ 2009-01-28 23:16 UTC (permalink / raw) To: linux-kernel; +Cc: airlied, Eric Anholt Same player again: i915 modesetting generates an oops. This is from stock 2.6.29-rc3 kernel, and the behaviour is exactly the same as with 2.6.28 + modesetting patch from Xorg git tree that I reported on january the 5th. <6>Linux agpgart interface v0.103 <6>agpgart-intel 0000:00:00.0: Intel 945GM Chipset <6>agpgart-intel 0000:00:00.0: detected 7932K stolen memory <6>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 <6>[drm] Initialized drm 1.1.0 20060810 <6>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 <7>pci 0000:00:02.0: setting latency timer to 64 <1>BUG: unable to handle kernel NULL pointer dereference at (null) <1>IP: [<(null)>] (null) <4>*pde = 00000000 <0>Oops: 0000 [#1] SMP <0>last sysfs file: <4>Modules linked in: i915(+) cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit drm i2c_core intel_agp agpgart <4> <4>Pid: 1443, comm: insmod Not tainted (2.6.29-rc3 #1) Latitude D820 <4>EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 <4>EIP is at 0x0 <4>EAX: 00000000 EBX: c1fbbae0 ECX: c1ffe540 EDX: c1fbbae0 <4>ESI: 00000000 EDI: f6f07148 EBP: f6fb7ba8 ESP: f6fb7b8c <4> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 <0>Process insmod (pid: 1443, ti=f6fb6000 task=f6cc0ae0 task.ti=f6fb6000) <0>Stack: <4> c015640c 000000d0 00000000 00000000 00000000 00000000 00000000 f6fb7bc8 <0> c0156483 00000000 00000000 f6f07148 00000000 00000000 00000020 f6fb7bd8 <0> c0156522 00000000 f64f5ac0 f6fb7c04 f7e08bba 00000000 f6599880 00020000 <0>Call Trace: <0> [<c015640c>] ? __read_cache_page+0x6c/0xb0 <0> [<c0156483>] ? read_cache_page_async+0x33/0xc0 <0> [<c0156522>] ? read_cache_page+0x12/0x60 <0> [<f7e08bba>] ? i915_gem_object_get_page_list+0x7a/0x100 [i915] <0> [<f7e09410>] ? i915_gem_object_bind_to_gtt+0xf0/0x220 [i915] <0> [<f7e0a5c9>] ? i915_gem_object_pin+0x79/0xd0 [i915] <0> [<f7ccd5db>] ? drm_gem_object_alloc+0x8b/0xb0 [drm] <0> [<f7e0afb2>] ? i915_gem_init_ringbuffer+0x62/0x340 [i915] <0> [<f7cd45b5>] ? drm_mm_create_tail_node+0x25/0x80 [drm] <0> [<f7e03f57>] ? i915_load_modeset_init+0x197/0x430 [i915] <0> [<f7e0440d>] ? i915_driver_load+0x1cd/0x2d0 [i915] <0> [<f7cd1591>] ? drm_get_dev+0x1a1/0x1d0 [drm] <0> [<c0204510>] ? match_pci_dev_by_id+0x0/0x70 <0> [<c0254d4f>] ? put_device+0xf/0x20 <0> [<c01f3712>] ? kobject_get+0x12/0x20 <0> [<f7ccc10c>] ? drm_init+0x8c/0xf0 [drm] <0> [<f7c78000>] ? i915_init+0x0/0x6f [i915] <0> [<f7c7806d>] ? i915_init+0x6d/0x6f [i915] <0> [<c010111d>] ? do_one_initcall+0x2d/0x1a0 <0> [<c01f223e>] ? sub_alloc+0x6e/0x170 <0> [<c011f0fd>] ? update_curr+0x5d/0xc0 <0> [<c011f45d>] ? dequeue_entity+0x3d/0x50 <0> [<c011f64c>] ? dequeue_task_fair+0x1c/0x40 <0> [<c01229d3>] ? finish_task_switch+0x43/0x90 <0> [<c03750e8>] ? __sched_text_start+0x1e8/0x490 <0> [<c01229d3>] ? finish_task_switch+0x43/0x90 <0> [<c03750e8>] ? __sched_text_start+0x1e8/0x490 <0> [<c037580c>] ? schedule_timeout+0x8c/0x90 <0> [<c0120bd6>] ? __enqueue_rt_entity+0xa6/0xf0 <0> [<c01149d4>] ? xapic_wait_icr_idle+0x14/0x20 <0> [<c0375450>] ? wait_for_common+0xc0/0x120 <0> [<c01244f0>] ? default_wake_function+0x0/0x10 <0> [<c011e589>] ? resched_task+0x59/0x60 <0> [<c01244f0>] ? default_wake_function+0x0/0x10 <0> [<c01f1be5>] ? __next_cpu+0x15/0x30 <0> [<c017423e>] ? percpu_free+0x1e/0x30 <0> [<c0150d3a>] ? stop_machine_destroy+0x3a/0x40 <0> [<c014e0c5>] ? load_module+0xa45/0xa90 <0> [<c014e225>] ? sys_init_module+0x115/0x1c0 <0> [<c010336e>] ? syscall_call+0x7/0xb <0>Code: Bad EIP value. <0>EIP: [<00000000>] 0x0 SS:ESP 0068:f6fb7b8c <4>---[ end trace 899f617c758d01fb ]--- # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc3 # Wed Jan 28 20:37:54 2009 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_32_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # # RCU Subsystem # CONFIG_CLASSIC_RCU=y # CONFIG_TREE_RCU is not set # CONFIG_PREEMPT_RCU is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=15 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_FREEZER=y # # Processor type and features # # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_VSMP is not set # CONFIG_X86_RDC321X is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set # CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_CYRIX_32=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR_32=y CONFIG_CPU_SUP_TRANSMETA_32=y CONFIG_CPU_SUP_UMC_32=y CONFIG_X86_DS=y CONFIG_X86_PTRACE_BTS=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y # CONFIG_IOMMU_HELPER is not set # CONFIG_IOMMU_API is not set CONFIG_NR_CPUS=64 # CONFIG_SCHED_SMT is not set # CONFIG_SCHED_MC is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_X86_MCE_P4THERMAL is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y CONFIG_MMU_NOTIFIER=y # CONFIG_HIGHPTE is not set # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW_64K=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 # CONFIG_X86_PAT is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management and ACPI options # CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=m # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=m CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=m # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=m # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_SMI is not set # CONFIG_X86_P4_CLOCKMOD is not set # CONFIG_X86_CPUFREQ_NFORCE2 is not set # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set # CONFIG_X86_E_POWERSAVER is not set # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # CONFIG_CPU_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set # CONFIG_PCI_GOOLPC is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_OLPC is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y # CONFIG_PCMCIA_LOAD_CIS is not set # CONFIG_PCMCIA_IOCTL is not set CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=y CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_HAVE_ATOMIC_IOMAP=y CONFIG_NET=y # # Networking options # CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set CONFIG_ATALK=m # CONFIG_DEV_APPLETALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m # CONFIG_IRNET is not set CONFIG_IRCOMM=m # CONFIG_IRDA_ULTRA is not set # # IrDA options # CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRDA_DEBUG=y # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m # # Dongle support # # CONFIG_DONGLE is not set # CONFIG_KINGSUN_DONGLE is not set # CONFIG_KSDAZZLE_DONGLE is not set # CONFIG_KS959_DONGLE is not set # # FIR device drivers # # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set # CONFIG_NSC_FIR is not set # CONFIG_WINBOND_FIR is not set # CONFIG_TOSHIBA_FIR is not set CONFIG_SMC_IRCC_FIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set # CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set CONFIG_PNP=y CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_VIRTIO_BLK is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y CONFIG_SATA_SIL24=y CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_WINBOND_VLB is not set # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID5_RESHAPE=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_CS89x0 is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set # CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set CONFIG_SLIP=m # CONFIG_SLIP_COMPRESSED is not set CONFIG_SLHC=m # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_VIRTIO_NET is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=m CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=m CONFIG_SERIAL_8250_PNP=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI1563=m # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD756_S4882 is not set CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=m # CONFIG_I2C_ISCH is not set CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m # CONFIG_I2C_NFORCE2_S4985 is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Graphics adapter I2C/DDC channel drivers # CONFIG_I2C_VOODOO3=m # # Other I2C/SMBus bus drivers # CONFIG_I2C_PCA_ISA=m # CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_STUB=m # CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # # Multimedia devices # # # Multimedia core support # CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_COMMON=m CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m # CONFIG_MEDIA_TUNER_CUSTOMIZE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set # CONFIG_USB_STV06XX is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SONIXB is not set # CONFIG_USB_GSPCA_SONIXJ is not set # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_ZC3XX is not set # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_EM28XX is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set # CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_ZC0301 is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_RADIO_TEA5764 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=m # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=m CONFIG_DRM_TDFX=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_DRM_VIA=m CONFIG_DRM_SAVAGE=m CONFIG_VGASTATE=m # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=m CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_UVESA=m # CONFIG_FB_VESA is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=m CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_NVIDIA_DEBUG is not set CONFIG_FB_NVIDIA_BACKLIGHT=y CONFIG_FB_RIVA=m CONFIG_FB_RIVA_I2C=y # CONFIG_FB_RIVA_DEBUG is not set CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_I810=m # CONFIG_FB_I810_GTF is not set # CONFIG_FB_LE80578 is not set CONFIG_FB_INTEL=m # CONFIG_FB_INTEL_DEBUG is not set CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m # CONFIG_FB_MATROX_MAVEN is not set # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=m CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=m CONFIG_FB_ATY_CT=y CONFIG_FB_ATY_GENERIC_LCD=y CONFIG_FB_ATY_GX=y CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y # CONFIG_FB_SAVAGE_ACCEL is not set CONFIG_FB_SIS=m # CONFIG_FB_SIS_300 is not set # CONFIG_FB_SIS_315 is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_PROGEAR is not set # CONFIG_BACKLIGHT_MBP_NVIDIA is not set # CONFIG_BACKLIGHT_SAHARA is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=m # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_LOGO is not set CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m # CONFIG_SND_PCM_OSS_PLUGINS is not set CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_SEQ_RTCTIMER_DEFAULT is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set # CONFIG_SND_AC97_POWER_SAVE is not set CONFIG_SND_ISA=y # CONFIG_SND_ADLIB is not set # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_SC6000 is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_MIRO is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # CONFIG_SND_WAVEFRONT is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m # CONFIG_SND_HDA_HWDEP is not set # CONFIG_SND_HDA_INPUT_BEEP is not set CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y CONFIG_SND_HDA_CODEC_NVHDMI=y CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_HDA_POWER_SAVE is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SIS7019 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # Special HID drivers # CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y # CONFIG_GREENASIA_FF is not set CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # # see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_USS720 is not set CONFIG_USB_SERIAL=m # CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set # CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y # CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=m # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m # CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_HW_BRANCH_TRACER=y # # Tracers # # CONFIG_SYSPROF_TRACER is not set # CONFIG_HW_BRANCH_TRACER is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_4KSTACKS is not set CONFIG_DOUBLEFAULT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # CONFIG_OPTIMIZE_INLINING is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y # # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_ALGAPI2=m CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=m CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=m CONFIG_CRYPTO_RNG2=m CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER2=m CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_XTS is not set # # Hash modes # CONFIG_CRYPTO_HMAC=m CONFIG_CRYPTO_XCBC=m # # Digest # CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m # # Ciphers # CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m # CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_586 is not set # CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_586=m # # Compression # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m CONFIG_CRYPTO_DEV_GEODE=m # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m # CONFIG_LGUEST is not set CONFIG_VIRTIO=m CONFIG_VIRTIO_RING=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y ^ permalink raw reply [flat|nested] 3+ messages in thread
* Linux 2.6.29-rc3
@ 2009-01-28 19:41 Linus Torvalds
2009-01-29 15:34 ` Gene Heskett
0 siblings, 1 reply; 3+ messages in thread
From: Linus Torvalds @ 2009-01-28 19:41 UTC (permalink / raw)
To: Linux Kernel Mailing List
It's out there, and while it's a bit larger than I'd wish for, that size
is pretty understandable considering that it's closer to two weeks than
one in between -rc2 and -rc3 (due to LCA, obviously).
And it isn't really _that_ big: part of the reason it looks bigger as a
traditional patch (which is what I upload when I upload patches) than it
really is due to a lot of m68k include file renames, so if you look at the
git rename-aware patches it all actually looks much smaller.
About a quarter of it is arch updates (of which a third is ppc defconfig
updates): mainly sh, arm and m68k. Almost another quarter is some
filesystem updates, but the bulk of that is literally just splitting up
the core fs Kconfig file and moving out the filesystem config information
into the individual filesystems. With some xfs updates to round it all up.
And half (which is pretty much "the rest" for you guys keeping count) is
driver updates. As usual. USB and the dmaengine code dominates in pure
lines, but there's a couple of new drivers like the i.MX31 framebuffer
thing etc.
But the most interesting part (at least for me) of the driver update is
likely the continued fixing of the PCI suspend/resume handling, which for
me now finally results in a _reliable_ suspend/resume on one of my laptops
(admittedly I still have an X problem, but the discussions on the exact
way to fix that are still on-going, and it's technically a userlevel
problem that will likely result in a kernel change just to make the DRI
interfaces not be as fragile).
We have historically been in a situation where suspend/resume often works,
but may not be reliable due to interrupt timings, especially if there are
any shared interrupts going on between drivers. We already had some parts
of the suspend/resume changes in -rc1, but I hope it's approaching more
stability now.
[ In the longer run, the changes will also allow us to simplify a lot of
device drivers thanks to the code PCI driver code doing more of it for
us, but that's a largely independent later cleanup issue. ]
The thing about suspend/resume though is that partly exactly _because_
it's been very fragile historically (a driver may have been totally solid
on one machine for example, but flaky on another due to different
interrupt configuration), I'm not going out on much of a limb when I say
that we'll really need user feedback on any drivers that now don't
suspend/resume cleanly.
So please, people - especially if you use suspend/resume, we want to hear
about regressions, and will need to know what hardware and drivers you
have active. Hearing about success stories is obviously always fun, but
it's the regressions that we really want to track.
Linus
---
Abbas, Mohamed (1):
iwlwifi: fix rs_get_rate WARN_ON()
Adrian Bunk (3):
m68knommu: set NO_DMA
m68knommu: remove obsolete and unused eLIA board
m68knommu: remove the no longer used PCI support option
Adrian McMenamin (1):
dma-coherent: per-device coherent area is in pages, not bytes.
Ajay Kumar Gupta (1):
USB: musb free_irq bugfix
Alan Cox (1):
USB: cdc-acm: Add another conexant modem to the quirks
Alan Stern (3):
USB: fix toggle mismatch in disable_endpoint paths
USB: don't enable wakeup by default for PCI host controllers
USB: fix char-device disconnect handling
Alex Williamson (1):
virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs
Alex.Cheng@quantatw.com (1):
USB: option: add QUANTA HSDPA Data Card device ids
Alexey Dobriyan (37):
fs/Kconfig: move reiserfs out
fs/Kconfig: move jfs out
fs/Kconfig: move ocfs2 out
fs/Kconfig: move btrfs out
fs/Kconfig: move autofs, autofs4 out
fs/Kconfig: move fuse out
fs/Kconfig: move iso9660, udf out
fs/Kconfig: move fat out
fs/Kconfig: move ntfs out
fs/Kconfig: move sysfs out
fs/Kconfig: move configfs out
fs/Kconfig: move adfs out
fs/Kconfig: move affs out
fs/Kconfig: move ecryptfs out
fs/Kconfig: move hfs, hfsplus out
fs/Kconfig: move befs out
fs/Kconfig: move bfs out
fs/Kconfig: move efs out
fs/Kconfig: move cramfs out
fs/Kconfig: move squashfs out
fs/Kconfig: move vxfs out
fs/Kconfig: move minix out
fs/Kconfig: move omfs out
fs/Kconfig: move hpfs out
fs/Kconfig: move qnx4 out
fs/Kconfig: move romfs out
fs/Kconfig: move sysv out
fs/Kconfig: move ufs out
fs/Kconfig: move nfs out
fs/Kconfig: move nfsd out
fs/Kconfig: move sunrpc out
fs/Kconfig: move smbfs out
fs/Kconfig: move the rest of ncpfs out
fs/Kconfig: move coda out
fs/Kconfig: move afs out
fs/Kconfig: move 9p out
Fix longstanding "error: storage size of '__mod_dmi_device_table' isn't known"
Anand Gadiyar (1):
ARM: OMAP: Fix DMA CCR programming for request line > 63, v3
Andi Kleen (3):
x86, generic: mark complex bitops.h inlines as __always_inline
kbuild: print usage with no arguments in scripts/config
x86: use early clobbers in usercopy*.c
Andreas Schwab (1):
ide: fix IDE PMAC breakage
Andrew Lunn (1):
USB: CDC-ACM quirk for MTK GPS
Andrew Morton (1):
mlx4_core: Fix min() warning
Andrew Vasquez (8):
[SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts.
[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
[SCSI] qla2xxx: Always serialize mailbox command execution.
[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
[SCSI] qla2xxx: Correct endianness issue during flash manipulation.
[SCSI] qla2xxx: Correct regression in EH abort handling.
[SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.
[SCSI] qla2xxx: Update version number to 8.03.00-k2.
Andrey Borzenkov (1):
orinoco: move kmalloc(..., GFP_KERNEL) outside spinlock in orinoco_ioctl_set_genie
Andrey Yurovsky (1):
libertas: Fix alignment issues in libertas core
Anirban Chakraborty (1):
[SCSI] qla2xxx: Fix memory leak in error path
Anton Vorontsov (3):
phylib: Fix oops in suspend/resume paths
gianfar: Revive VLAN support
USB: Driver for Freescale QUICC Engine USB Host Controller
Artur Skawina (1):
p54: set_tim must be atomic.
Arun KS (1):
ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23
Atsushi Nemoto (1):
dmatest: Use custom map/unmap for destination buffer
Ben Greear (1):
vlan: Export symbols as non GPL symbols.
Ben Nizette (1):
ASoC: atmel_pcm: Remove non-existant header
Brandon Philips (1):
USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440
Brian Cavagnolo (1):
mac80211: decrement ref count to netdev after launching mesh discovery
Brian King (1):
[SCSI] ibmvfc: Fix DMA mapping leak on memory allocation failure
Brice Goglin (1):
myri10ge: don't forget pci_disable_device()
Bryan Wu (2):
USB: composite: Fix bug: should test set_alt function pointer before use it
USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index
Casey Schaufler (1):
smackfs load append mode fix
Chr (1):
p54: add missing break in eeprom parser
Christian Borntraeger (1):
[CVE-2009-0029] sparc: Enable syscall wrappers for 64-bit
Christian Eggers (1):
usb/mcs7830: Don't use buffers from stack for USB transfers
Christian Lamparter (6):
p54: fix oops caused by bad eeproms
p54: fix p54_set_key's return code
mac80211: fix slot time debug message
p54: more cryptographic accelerator fixes
p54usb: fix nasty use after free
p54usb: fix packet loss with first generation devices
Christoph Hellwig (7):
xfs: fix dentry aliasing issues in open_by_handle
xfs: use mnt_want_write in compat_attrmulti ioctl
xfs: add a separate lock class for the per-mount list of dquots
xfs: lockdep annotations for xfs_dqlock2
xfs: add a lock class for group/project dquots
xfs: fix bad_features2 fixups for the root filesystem
xfs: sanity check attr fork size
Clemens Ladisch (3):
sound: virtuoso: enable UART on Xonar HDAV1.3
sound: virtuoso: add newline
sound: virtuoso: document HDAV1.3 driver status
Cliff Wickman (1):
x86, UV: cpu_relax in uv_wait_completion
Dan Carpenter (1):
fuse: fix NULL deref in fuse_file_alloc()
Dan Magenheimer (1):
xen: actually release memory when shrinking domain
Dan Williams (3):
fsldma: use a valid 'device' for dma_pool_create
dmaengine: kill some dubious WARN_ONCEs
dmaengine: dma_issue_pending_all == nop when CONFIG_DMA_ENGINE=n
Daniele Venzano (1):
isdn: Fix missing ifdef in isdn_ppp
Dave Airlie (2):
drm: fix leak of device mappings since multi-master changes.
i915: fix freeing path for gem phys objects.
Dave Chinner (1):
Long btree pointers are still 64 bit on disk
David Brownell (6):
drivers/ide/palm_bk3710.c buildfix
[ARM] 5368/1: arch/arm/mach-davinci/usb.c buildfix
USB: omap1 ohci buildfix (otg related)
USB: musb davinci buildfix
USB: musb_hdrc: another davinci buildfix (otg related)
USB: musb: Kconfig fix
David Daney (2):
Make irq_*_affinity depend on CONFIG_GENERIC_HARDIRQS too.
cpumask fallout: Initialize irq_default_affinity earlier
David S. Miller (4):
sparc64: Initialize FHC/CLOCK LED platform_device 'id' field correctly.
sparc64: Annotate sparc64 specific syscalls with SYSCALL_DEFINEx()
sparc64: Fix DAX handling via userspace access from kernel.
Revert "xfrm: For 32/64 compatability wrt. xfrm_usersa_info"
David Teigland (1):
dlm: fix plock notify callback to lockd
Dhananjay Phadke (2):
netxen: fix vlan tso/checksum offload
netxen: reduce memory footprint
Divy Le Ray (1):
cxgb3: Fix LRO misalignment
Don Skidmore (2):
ixgbe: fix dca issue with relaxed ordering turned on
ixgbe: fix tag stripping for VLAN ID 0
Eilon Greenstein (22):
bnx2x: Free IRQ
bnx2x: Handling probe failures
bnx2x: Potential race after iSCSI boot
bnx2x: Wrong HDR offset in CAM
bnx2x: Read chip ID
bnx2x: Block nvram access when the device is inactive
bnx2x: Overstepping array bounds
bnx2x: 1G-10G toggling race
bnx2x: Prevent self test loopback failures
bnx2x: Legacy speeds autoneg failures
bnx2x: Handling PHY FW load failure
bnx2x: Driver description update
bnx2x: Barriers for the compiler
bnx2x: Version update
bnx2x: Reset HW before use
bnx2x: Disable napi
bnx2x: Handling load failures
bnx2x: Carrier off first call
bnx2x: Calling napi_del
bnx2x: Missing rmb when waiting for FW response
bnx2x: loopback test failure
bnx2x: Version
Eric Anholt (3):
drm: stash AGP include under the do-we-have-AGP ifdef
x86: work around PAGE_KERNEL_WC not getting WC in iomap_atomic_prot_pfn.
drm: Rip out the racy, unused vblank signal code.
Eric Paris (1):
tty_open can return to userspace holding tty_mutex
Eric Sandeen (1):
[XFS] Remove the rest of the macro-to-function indirections.
Gabriel Paubert (1):
mv643xx_eth: prevent interrupt storm on ifconfig down
Gary Hade (1):
x86: remove kernel_physical_mapping_init() from init section
Gerhard Pircher (1):
powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
Grant Erickson (1):
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
Greg Kroah-Hartman (1):
sysfs: fix problems with binary files
Greg Ungerer (4):
m68knommu: fix cache flushing for the 527x ColdFire processors
m68knommu: remove the obsolete and long unused comempci chip support
m68knommu: fix syscall restarting
uclinux: add process name to allocation error message
Guennadi Liakhovetski (3):
dmaengine: add async_tx_clear_ack() macro
i.MX31: Image Processing Unit DMA and IRQ drivers
i.MX31: framebuffer driver
H. Peter Anvin (2):
x86: add MSR_IA32_MISC_ENABLE bits to <asm/msr-index.h>
x86: unmask CPUID levels on Intel CPUs
Harvey Harrison (1):
m68k{nommu}: fixups after the header move
Heiko Carstens (4):
[S390] personality: fix personality loss on execve
[S390] cputime: fix lowcore initialization on cpu hotplug
[S390] etr/stp: fix possible deadlock
lcs: fix compilation for !CONFIG_IP_MULTICAST
Henrik Kretzschmar (1):
sound: Remove removed OSS kernel parameters from doc
Herbert Xu (6):
crypto: authenc - Fix zero-length IV crash
net: Add debug info to track down GSO checksum bug
gro: Fix handling of complete checksums in IPv6
gro: Fix error handling on extremely short frags
gro: Fix merging of paged packets
crypto: blkcipher - Fix WARN_ON handling in walk_done
Hidetoshi Seto (1):
PCI/MSI: bugfix/utilize for msi_capability_init()
Hin-Tak Leung (1):
zd1211rw: adding Sitecom WL-603 (0df6:0036) to the USB id list
Huang Weiyi (1):
ARM: OMAP: remove duplicated #include's
Hugo Villeneuve (1):
USB: musb cppi bugfixes
Ian Campbell (2):
xen: handle highmem pages correctly when shrinking a domain
xen: unitialised return value in xenbus_write_transaction
Ihar Hrachyshka (1):
MIPS: enable serial UART support on PNX833X devices.
Inaky Perez-Gonzalez (3):
wimax/i2400m: error paths that need to free an skb should use kfree_skb()
debugfs: introduce stub for debugfs_create_size_t() when DEBUG_FS=n
USB: add kernel-doc for wusb_dev in struct usb_device
Ingo Molnar (5):
x86, cpufreq: remove leftover copymask_copy()
fix: crash: IP: __bitmap_intersects+0x48/0x73
Revert "x86: signal: change type of paramter for sys_rt_sigreturn()"
x86: use standard PIT frequency
x86: unmask CPUID levels on Intel CPUs, fix
Ivo van Doorn (1):
rt2x00: Fix TX rate short preamble detection
J. Bruce Fields (3):
nfs: note that CONFIG_SUNRPC_XPRT_RDMA turns on server side support too
nfsd: fix null dereference on error path
nfsd: fix cred leak on every rpc
James A. Treacy (1):
USB: cdc-acm: support some gps data loggers
James Lentini (1):
update port number in NFS/RDMA documentation
Jan Beulich (2):
x86: avoid early crash in disable_local_APIC()
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2)
Jan Kara (2):
quota: Improve locking
ocfs2: Remove ocfs2_dquot_initialize() and ocfs2_dquot_drop()
Jarek Poplawski (1):
net: Fix data corruption when splicing from sockets.
Jarkko Nikula (1):
ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
Jarod Wilson (1):
crypto: ccm - Fix handling of null assoc data
Jaswinder Singh Rajput (1):
time-sched.c: tick_nohz_update_jiffies should be static
Jean Delvare (5):
i2c: Delete 10 unused driver IDs
i2c: Delete many unused adapter IDs
i2c: Quilt tree has moved
eeprom: More consistent symbol names
i2c: Warn on deprecated binding model use
Jean-Baptiste Onofre (1):
USB: storage: support of Dane-Elec MediaTouch USB device
Jean-Christop PLAGNIOL-VILLARD (1):
[ARM] 5370/1: at91: fix rm9200 watchdog
Jeff Layton (2):
dlm: initialize file_lock struct in GETLK before copying conflicting lock
nfsd: only set file_lock.fl_lmops in nfsd4_lockt if a stateowner is found
Jeff Mahoney (1):
x86: define ARCH_WANT_FRAME_POINTERS
Jesper Nilsson (1):
klist.c: bit 0 in pointer can't be used as flag
Jesse Barnes (6):
drm: create mode_config idr lock
drm/i915: remove unnecessary debug output in KMS init
drm/i915: hook up LVDS DPMS property
drm: don't whine about not reading EDID data
drm/i915: Fix cursor physical address choice to match the 2D driver.
networking: document "nc" in addition to "netcat" in netconsole.txt
Jesse Brandeburg (1):
e1000e: workaround hw errata
Jiri Slaby (3):
relay: fix lock imbalance in relay_late_setup_files
PCI hotplug: fix lock imbalance in pciehp
NET: net_namespace, fix lock imbalance
Joe Carnuccio (1):
[SCSI] qla2xxx: Correct descriptions in flash manipulation routines.
John Adamson (1):
m68knommu: fix ColdFire 5272 serial baud rates in mcf.c
JosephChan@via.com.tw (1):
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571
Josh Boyer (4):
powerpc/40x: Update PowerPC 40x defconfigs
powerpc/44x: Update PowerPC 44x defconfigs
powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
powerpc: Remove arch/ppc cruft from Kconfig
Jouni Malinen (2):
ath9k: Fix an operator typo in phy rate validation
ath9k: Fix an operator typo in REG_DOMAIN_2GHZ_MASK
Julia Lawall (2):
arch/sh/mm: Move a dereference below a NULL test
USB: musb uses endpoint functions
Kalle Valo (1):
USB: musb: tusb6010 buildfix
Kay Sievers (1):
PNP: fix broken pnp lowercasing for acpi module aliases
Krzysztof Hałasa (1):
net: Fix linux/if_frad.h's suitability for userspace.
Kumar Gala (7):
powerpc/85xx: Fix typo in mpc8572ds dts
powerpc/85xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/8xx: Update defconfigs
powerpc/embedded6xx: Update defconfigs
dmi: Fix build breakage
Kuninori Morimoto (3):
sh: mach-migor: Add ov772x support.
sh: mach-migor: Delete soc_camera_platform setup.
sh: mach-migor: Add tw9910 support.
Lai Jiangshan (2):
rcu: add __cpuinit to rcu_init_percpu_data()
rcu: remove duplicate CONFIG_RCU_CPU_STALL_DETECTOR
Lalit Chandivade (1):
[SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.
Larry Finger (1):
rtl8187: Add termination packet to prevent stall
Lennert Buytenhek (2):
Revert "mv643xx_eth: use longer DMA bursts".
mv643xx_eth: fix multicast filter programming
Leonardo Potenza (1):
x86: fix section mismatch warnings in kernel/setup_percpu.c
Li Yang (1):
powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
Linus Torvalds (3):
Fix annoying DRM_ERROR() string warning
Fix "multiple definition of `debugfs_create_size_t'"
Linux 2.6.29-rc3
Luis R. Rodriguez (3):
cfg80211: make handle_band() and handle_channel() wiphy specific
cfg80211: Fix regression with 11d on bands
cfg80211: Fix parsed country IE info for 5 GHz
Luke Yelavich (1):
ALSA: hda - add quirks for some 82801H variants to use ALC883_MITAC
Madhusudhan Chikkature (1):
[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3
Magnus Damm (4):
sh: ap325rxa MMC support using spi_gpio and mmc_spi
sh: Migo-R MMC support using spi_gpio and mmc_spi.
sh: export the sh7343 JPU to user space
sh: fix sh-sci / early printk build on sh7723
Mandeep Singh Baines (1):
softlock: fix false panic which can occur if softlockup_thresh is reduced
Marcel Sebek (1):
USB: 'option' driver - onda device MT503HS has wrong id
Mark Lord (5):
sata_mv: fix 8-port timeouts on 508x/6081 chips
sata_mv: don't read hc_irq_cause
sata_mv: remove bogus nsect restriction
sata_mv: msi masking fix (v2)
sata_mv: no longer experimental (v2)
Matt Carlson (1):
tg3: Fix firmware loading
Matt Helsley (1):
net: Move config NET_NS to from net/Kconfig to init/Kconfig
Matt Waddel (3):
m68knommu: add ColdFire M532x to the FEC configuration options
m68knommu: correct the mii calculations for 532x ColdFire FEC
m68knommu: fix 5329 ColdFire periphal addressing
Matthew Ranostay (4):
ALSA: hda: fix invalid power mapping masks
ALSA: hda: 83xxx port 0xe DAC selection
ALSA: hda: revert change to 92hd83xxx power mapping
ALSA: hda: Add STAC92HD83XXX_PWR_REF quirk
Mhayk Whandson (1):
USB: ftdi_sio driver support of bar code scanner from Diebold
Michael Bramer (1):
Add support for '8-port RS-232 MIC-3620 from advantech'
Michael Holzheu (2):
[S390] fix compat sigaltstack syscall table entry
[S390] Add missing compat system call wrappers.
Michael Schmitz (1):
ide: fix Falcon IDE breakage
Mike Christie (2):
[SCSI] libiscsi: fix iscsi pool leak
[SCSI] qla4xxx: do not reuse session when connecting to different target port
Mike Frysinger (1):
asm-sh/posix_types_{32,64}.h: drop __GLIBC__/__USE_ALL usage
Mike Travis (3):
rcu: move Kconfig menu
x86: put trigger in to detect mismatched apic versions
cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
Miklos Szeredi (4):
fuse: fix missing fput on error
fuse: fuse_fill_super error handling cleanup
fuse: destroy bdi on umount
fuse: fix poll notify
Oliver Neukum (2):
USB: storage: add unusual devs entry
USB: new id for ti_usb_3410_5052 driver
Patrick McHardy (1):
netfilter: ctnetlink: fix scheduling while atomic
Paul Mundt (8):
sh: Drop the BKL from sys_execve() on SH-5.
sh: mach-x3proto: needs linux/irq.h.
sh: sh7785lcr/highlander/hp6xx need linux/irq.h.
sh: Kill off obsolete busses from arch/sh/Kconfig.
serial: sh-sci: Fix up SH7720/SH7721 SCI build.
sh: update defconfigs.
nommu: Stub in vm_map_ram()/vm_unmap_ram()/vm_unmap_aliases().
dma-coherent: Restore dma_alloc_from_coherent() large alloc fall back policy.
Pavel Roskin (2):
dell_rbu: use scnprintf() instead of less secure sprintf()
orinoco: use KERN_DEBUG for link status messages
Pete Zaitcev (1):
USB: usbmon: Implement compat_ioctl
Peter Korsgaard (2):
fsldma: check for NO_IRQ in fsl_dma_chan_remove()
fsldma: print correct IRQ on mpc83xx
Peter P Waskiewicz Jr (1):
ixgbe: Fix usage of netif_*_all_queues() with netif_carrier_{off|on}()
Peter Ujfalusi (1):
ASoC: Add missing comma to SND_SOC_DAPM_SWITCH_E in soc-dapm.h
Peter Zijlstra (4):
itimers: remove the per-cpu-ish-ness
locking, hpet: annotate false positive warning
hrtimers: fix inconsistent lock state on resume in hres_timers_resume
x86, mm: fix pte_free()
Phil Dibowitz (3):
USB: Remove ZTE modem from unusual_devices
USB: unusual_dev: usb-storage needs to ignore a device
USB: storage: Add another unusual_dev for off-by-one bug
Phil Sutter (4):
korina: fix loop back of receive descriptors
korina: adjust headroom for new skb's also
korina: drop leftover assignment
pata-rb532-cf: remove set_irq_type from finish_io
Philipp Zabel (1):
power_supply: pda_power: Don't request shared IRQs w/ IRQF_DISABLED
Rafael J. Wysocki (8):
PCI PM: Restore standard config registers of all devices early
Hibernation: Introduce system_entering_hibernation
DMI: Introduce dmi_first_match to make the interface more flexible
SATA: Blacklisting of systems that spin off disks during ACPI power off
SATA AHCI: Blacklist system that spins off disks during ACPI power off
SATA Sil: Blacklist system that spins off disks during ACPI power off
SATA PIIX: Blacklist system that spins off disks during ACPI power off
USB: Fix suspend-resume of PCI USB controllers
Rakib Mullick (1):
x86: fix section mismatch warning
Ramax Lo (1):
[ARM] 5365/1: s3cmci: Use new include path of dma.h
Rami Rosen (1):
rt2x00: fix a wrong parameter for __test_and_clear_bit() in rt2x00rfkill_free().
Randy Dunlap (2):
kbuild: fix kbuild.txt typos
mac80211: more kernel-doc fixes
Reinette Chatre (1):
iwlwifi: return NETDEV_TX_OK from _tx ops
Richard Röjfors (1):
macb: avoid lockup when TGO during underrun
Robert Jennings (1):
powerpc/pseries: Correct VIO bus accounting problem in CMO env.
Robert Richter (1):
oprofile: fix uninitialized use of struct op_entry
Robie Basak (1):
USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID
Roel Kluin (2):
net/9p: fid->fid is used uninitialized
USB: GADGET: fix !x & y
Roland Dreier (4):
IPoIB: Fix hang in napi_disable() if P_Key is never found
IPoIB: Fix deadlock between ipoib_open() and child interface create
IB/mlx4: Fix memory ordering problem when posting LSO sends
driver core: Convert '/' to '!' in dev_set_name()
Russell King (6):
[ARM] omap: ensure OMAP drivers pass a struct device to clk_get()
[ARM] fix StrongARM-11x0 page copy implementation
[ARM] clkdev: fix clock matching
[ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms
[ARM] omap: usb: thou shalt not provide empty release functions
[ARM] fix section-based ioremap
Rusty Russell (2):
work_on_cpu: don't try to get_online_cpus() in work_on_cpu.
work_on_cpu: Use our own workqueue.
SUGIOKA Toshinobu (1):
sh: fix unaligned and nonexistent address handling
Sam Ravnborg (4):
Revert "kbuild: strip generated symbols from *.ko"
m68k,m68knommu: merge header files
sparc64: fix readout of cpu/fpu type
sparc64: fix modpost failure
Sean MacLennan (1):
powerpc/44x: Warp patches for the new NDFC driver
Sebastian Siewior (1):
m68knommu: use one exist from execption
Seokmann Ju (1):
[SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
Stephen Rothwell (4):
IB/ehca: Fix printk format warnings from u64 type change
IB/ehca: Use consistent types for ehca_plpar_hcall9()
powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
powerpc: More printing warning fixes for the l64 to ll64 conversion
Steve Glendinning (5):
sh: convert ap325rxa platform to use smsc911x.
sh: convert magicpanelr2 platform to use smsc911x.
sh: convert rsk7203 to use smsc911x.
usbnet: allow type check of devdbg arguments in non-debug build
phy: Add suspend/resume support to SMSC PHYs
Steven Noonan (1):
kernel/fork.c: unused variable 'ret'
Suresh Siddha (3):
x86, pat: fix reserve_memtype() for legacy 1MB range
x86: fix page attribute corruption with cpa()
x86: fix PTE corruption issue while mapping RAM using /dev/mem
Swaminathan S (1):
USB: musb cppi dma fix
Takashi Iwai (2):
ALSA: hda - Fix (yet more) STAC925x issues
ALSA: hda - Add model entry for HP dv4
Tejun Heo (4):
libata-sff: fix incorrect EH message
libata: set NODEV_HINT for 0x7f status
sata_nv: rename nv_nf2_hardreset()
sata_nv: fix MCP5x reset
Thomas Gleixner (1):
debugobjects: add and use INIT_WORK_ON_STACK
Thomas Reitmayr (1):
sata_mv: Properly initialize main irq mask
Thomas Renninger (1):
x86: mtrr fix debug boot parameter
Timo Teras (1):
af_key: initialize xfrm encap_oa
Timur Tabi (1):
ASoC: fix registration of the SoC card in the Freescale MPC8610 drivers
Tomasz K (1):
USB: cp2101 device
Tony Lindgren (7):
ARM: OMAP: Fix compile for various McBSP
ARM: OMAP: Fix compile for palmte
ARM: OMAP: Fix compile for beagle
ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS
ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3
ARM: OMAP: Remove unused platform devices, v3
ARM: OMAP: Fix compile for h3 MMC
Uwe Kleine-König (3):
move wm8400-regulator's probe function to .devinit.text
[NET] am79c961a: fix spin_lock usage
Move jsm_remove_one to .devexit.text
Vegard Nossum (2):
security: introduce missing kfree
inotify: clean up inotify_read and fix locking problems
Vlad Yasevich (4):
sctp: Fix crc32c calculations on big-endian arhes.
sctp: Correctly start rtx timer on new packet transmissions.
sctp: Properly timestamp outgoing data chunks for rtx purposes
sctp: Fix another socket race during accept/peeloff
Vladislav Zolotarov (1):
bnx2x: tx_has_work should not wait for FW
Wolfgang Glas (1):
USB: cp2101: add fasttrax GPS evaluation kit vendor/product ID
Wolfram Sang (4):
i2c: Move at24 to drivers/misc/eeprom
i2c: Move old eeprom driver to /drivers/misc/eeprom
spi: Move at25 (for SPI eeproms) to /drivers/misc/eeprom
eeprom: Move 93cx6 eeprom driver to /drivers/misc/eeprom
Yossi Etigin (1):
IPoIB: Do not print error messages for multicast join retries
Yuri Tikhonov (1):
dmaengine: fix dependency chaining
Zhu Yi (1):
iwlwifi: remove CMD_WANT_SKB flag if send_cmd_sync failure
roel kluin (1):
via-velocity: fix hot spin
sware (1):
USB: remove vernier labpro from ldusb
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Linux 2.6.29-rc3 2009-01-28 19:41 Linus Torvalds @ 2009-01-29 15:34 ` Gene Heskett 0 siblings, 0 replies; 3+ messages in thread From: Gene Heskett @ 2009-01-29 15:34 UTC (permalink / raw) To: Linus Torvalds; +Cc: Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 3357 bytes --] On Wednesday 28 January 2009, Linus Torvalds wrote: >It's out there, and while it's a bit larger than I'd wish for, that size Unforch, its not ready for prime time here. 1. In my buildit script, I copy the .config(s) from the defined $oldsrc tree to a safe place. This includes the 'makeit' script. 2. I move the $src tree out of the way 3. Unpack new $src tree. 4. rename $src tree to $newversion, rename the $src.old back to $src 5. cd to $newversion 6. Copy all the .configs saved previously to this tree 7. apply the patch(plural if required) 8. make oldconfig 9. make xconfig (in case I want to change something) exit Then I cd to the new tree, and edit 'makeit' to fix its $VER, then #> time ./makeit which does everything but edit grub.conf for me. It included all the reiserfs stuff I don't use, and pitched a fit over the includes It skipped all the network hardware drivers so I had no network. I redid the .config copying by hand, reran a make oldconfig by hand, and this time it worked although the make bzimage stage was still very noisy. And I had a network when I rebooted to that version. dmesg however was full of squawks (its attached) so I rebooted back to 2.6.28.2. Unforch the reboot killed the ethernet PHY's, so I had to crawl under the desk, pull the power and net cables, and go get a cuppa and check the weather (its snowing, yet, still, 3 days now about 40% of the time) before coming back in and plugging everything in and tapping the power switch. I'm getting smarter though, the next time I want to get out of a boot that isn't stable, I'll just tap the hardware reset, its a heck of a lot easier on hard drives. The first squawk is caused apparently by my bios, that is in fact fixed if I update to the most recent, but that one cannot be used in the same machine as a stable kernel, its not in its vocabulary. Support from ASUS is non-existent, I have sent several messages up the pipeline to them, with no response in over 60 days now. Since apparently (see the dmesg) that first mtrr related bios wrinkle is fixed by the workaround, I see no valid reason to mark the system as 'Tainted' because of it, but it is. What linux calls a Bios flub-up may be true, but once its 'fixed' with the older bios, the machine is rock solid. The newer bios version doesn't need the fixup, and its uptimes range from 1 hour down to about the time x gets init'ed, sometimes even before, I have see it hang in the bootup, tap the hardware reset and it works ok for maybe an hour next time. The next one (Oops/Bug) looks to be something in the cx88 code, which it seems has been changed since 2.6.28. I also note that 2.6.28 doesn't have to do a workaround for reversed MAC's, also noted in this dmesg. All in all, not ready for prime time use here, particularly when I want to reboot and have to use the hardware reset to do it if I don't want the MCP55 ethernet ports turned off in a manner that requires this full powerdown reset stuff to recover. That tends to take the fun out of playing the canary in the coal mine here. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) What does education often do? It makes a straight cut ditch of a free meandering brook. -- Henry David Thoreau [-- Attachment #2: dmesg-2.6.29-rc3 --] [-- Type: text/plain, Size: 56451 bytes --] [ 0.000000] Linux version 2.6.29-rc3 (root@coyote.coyote.den) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #3 SMP PREEMPT Thu Jan 29 08:52:29 EST 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:400 generic_get_mtrr+0xfa/0x110() [ 0.000000] Hardware name: System Product Name [ 0.000000] mtrr: your BIOS has set up an incorrect mask, fixing it up. [ 0.000000] Modules linked in: [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.29-rc3 #3 [ 0.000000] Call Trace: [ 0.000000] [<c0428716>] warn_slowpath+0x86/0xa0 [ 0.000000] [<c043f80b>] ? up+0x2b/0x40 [ 0.000000] [<c0428e64>] ? release_console_sem+0x1a4/0x1c0 [ 0.000000] [<c043f80b>] ? up+0x2b/0x40 [ 0.000000] [<c043f80b>] ? up+0x2b/0x40 [ 0.000000] [<c042943b>] ? printk+0x1b/0x20 [ 0.000000] [<c041b90f>] ? pat_init+0x7f/0xa0 [ 0.000000] [<c040fa9a>] generic_get_mtrr+0xfa/0x110 [ 0.000000] [<c071807a>] mtrr_trim_uncached_memory+0x7a/0x340 [ 0.000000] [<c0718411>] ? mtrr_bp_init+0xd1/0x6f0 [ 0.000000] [<c0714b66>] ? e820_end_pfn+0xc6/0xf0 [ 0.000000] [<c071312c>] setup_arch+0x43c/0x9a0 [ 0.000000] [<c042943b>] ? printk+0x1b/0x20 [ 0.000000] [<c070ca7c>] start_kernel+0x6c/0x300 [ 0.000000] [<c070c3d6>] ? reserve_ebda_region+0x56/0x70 [ 0.000000] [<c070c34c>] i386_start_kernel+0x7c/0xb0 [ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 37cfb000 - 37fefa33 [ 0.000000] Allocated new RAMDISK: 00100000 - 003f4a33 [ 0.000000] Move RAMDISK from 0000000037cfb000 - 0000000037fefa32 to 00100000 - 003f4a32 [ 0.000000] ACPI: RSDP 000F7D20, 0024 (r2 Nvidia) [ 0.000000] ACPI: XSDT DFEE3100, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP DFEEADC0, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aEventBlock: 32/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aControlBlock: 16/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in PmTimerBlock: 32/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 128/8 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for Pm1aEventBlock: 8, using default 32 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for Pm1aControlBlock: 8, using default 16 [20081204] [ 0.000000] ACPI Warning (tbfadt-0412): Invalid length for PmTimerBlock: 8, using default 32 [20081204] [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT DFEE3280, 7ACE (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS DFEE0000, 0040 [ 0.000000] ACPI: HPET DFEEB000, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG DFEEB080, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC DFEEAF00, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3718MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 00000000 - 379fe000 [ 0.000000] bootmap 00012000 - 00018f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000400000 - 00007ba374] TEXT DATA BSS ==> [0000400000 - 00007ba374] [ 0.000000] #4 [00007bb000 - 00007c3000] INIT_PG_TABLE ==> [00007bb000 - 00007c3000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000100000 - 00003f4a33] NEW RAMDISK ==> [0000100000 - 00003f4a33] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] free_area_init_node: node 0, pgdat c06eba00, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7437 pages used for memmap [ 0.000000] HighMem zone: 813013 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038958 [ 0.000000] Kernel command line: ro root=LABEL=/ rhgb quiet nomodeset [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] CPU 0 irqstacks, hard=c076b000 soft=c0763000 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2209.330 MHz processor. [ 0.000999] spurious 8259A interrupt: IRQ7. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console [tty0] enabled [ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000999] Memory: 4147036k/4718592k available (2175k kernel code, 44884k reserved, 925k data, 336k init, 3281800k highmem) [ 0.000999] virtual kernel memory layout: [ 0.000999] fixmap : 0xfff51000 - 0xfffff000 ( 696 kB) [ 0.000999] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000999] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000999] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000999] .init : 0xc070c000 - 0xc0760000 ( 336 kB) [ 0.000999] .data : 0xc061fc1e - 0xc0707020 ( 925 kB) [ 0.000999] .text : 0xc0400000 - 0xc061fc1e (2175 kB) [ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000999] hpet clockevent registered [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4418.66 BogoMIPS (lpj=2209330) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 512 [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] using C1E aware idle routine [ 0.000999] Checking 'hlt' instruction... OK. [ 0.004208] Freeing SMP alternatives: 10k freed [ 0.004210] ACPI: Core revision 20081204 [ 0.016157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.026168] CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.026999] CPU 1 irqstacks, hard=c076c000 soft=c0764000 [ 0.026999] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.000999] Initializing CPU#1 [ 0.000999] Calibrating delay using timer specific routine.. 4420.12 BogoMIPS (lpj=2210060) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.097728] CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.097735] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.098078] CPU 2 irqstacks, hard=c076d000 soft=c0765000 [ 0.098080] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.000999] Initializing CPU#2 [ 0.000999] Calibrating delay using timer specific routine.. 4419.99 BogoMIPS (lpj=2209998) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 2 [ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.169651] CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.169660] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.170069] CPU 3 irqstacks, hard=c076e000 soft=c0766000 [ 0.170072] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.000999] Initializing CPU#3 [ 0.000999] Calibrating delay using timer specific routine.. 4420.00 BogoMIPS (lpj=2210003) [ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 3 [ 0.000999] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.241676] CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 [ 0.241685] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.242025] Brought up 4 CPUs [ 0.242028] Total of 4 processors activated (17678.78 BogoMIPS). [ 0.243150] net_namespace: 532 bytes [ 0.243367] NET: Registered protocol family 16 [ 0.243662] ACPI: bus type pci registered [ 0.243797] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.243799] PCI: MCFG area at f0000000 reserved in E820 [ 0.243801] PCI: Using MMCONFIG for extended config space [ 0.243803] PCI: Using configuration type 1 for base access [ 0.245550] bio: create slab <bio-0> at 0 [ 0.246494] ACPI: EC: Look up EC in DSDT [ 0.257194] ACPI: Interpreter enabled [ 0.257198] ACPI: (supports S0 S5) [ 0.257209] ACPI: Using IOAPIC for interrupt routing [ 0.268949] ACPI: No dock devices found. [ 0.268962] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.269191] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.269202] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.269206] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.269225] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.269230] pci 0000:00:01.1: PME# disabled [ 0.269251] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.269269] pci 0000:00:02.0: supports D1 D2 [ 0.269271] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269273] pci 0000:00:02.0: PME# disabled [ 0.269289] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.269307] pci 0000:00:02.1: supports D1 D2 [ 0.269309] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269311] pci 0000:00:02.1: PME# disabled [ 0.269334] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.269358] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7] [ 0.269361] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3] [ 0.269364] pci 0000:00:05.0: reg 18 io port: [0x970-0x977] [ 0.269367] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73] [ 0.269370] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.269373] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.269400] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7] [ 0.269403] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3] [ 0.269406] pci 0000:00:05.1: reg 18 io port: [0x960-0x967] [ 0.269409] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63] [ 0.269412] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f] [ 0.269415] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.269442] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407] [ 0.269445] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003] [ 0.269448] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07] [ 0.269451] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803] [ 0.269454] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f] [ 0.269457] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.269508] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff] [ 0.269530] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.269532] pci 0000:00:06.1: PME# disabled [ 0.269560] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.269563] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007] [ 0.269567] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.269570] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.269589] pci 0000:00:08.0: supports D1 D2 [ 0.269590] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269594] pci 0000:00:08.0: PME# disabled [ 0.269619] pci 0000:00:09.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff] [ 0.269622] pci 0000:00:09.0: reg 14 io port: [0xac00-0xac07] [ 0.269625] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff] [ 0.269628] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f] [ 0.269647] pci 0000:00:09.0: supports D1 D2 [ 0.269649] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269652] pci 0000:00:09.0: PME# disabled [ 0.269688] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269690] pci 0000:00:0e.0: PME# disabled [ 0.269716] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.269718] pci 0000:00:0f.0: PME# disabled [ 0.269812] pci 0000:01:07.0: reg 10 io port: [0x9c00-0x9c3f] [ 0.269837] pci 0000:01:07.0: supports D1 D2 [ 0.269858] pci 0000:01:08.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.269901] pci 0000:01:08.2: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.269948] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfcfff000-0xfcfff7ff] [ 0.269952] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfcff8000-0xfcffbfff] [ 0.269977] pci 0000:01:0b.0: supports D1 D2 [ 0.269978] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.269981] pci 0000:01:0b.0: PME# disabled [ 0.270001] pci 0000:00:06.0: transparent bridge [ 0.270004] pci 0000:00:06.0: bridge io port: [0x9000-0x9fff] [ 0.270006] pci 0000:00:06.0: bridge 32bit mmio: [0xfa000000-0xfcffffff] [ 0.270033] pci 0000:00:0e.0: bridge io port: [0x7000-0x8fff] [ 0.270035] pci 0000:00:0e.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.270058] pci 0000:03:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.270065] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdde0000-0xfddeffff] [ 0.270069] pci 0000:03:00.0: reg 20 io port: [0x6c00-0x6cff] [ 0.270076] pci 0000:03:00.0: reg 30 32bit mmio: [0xfddc0000-0xfdddffff] [ 0.270090] pci 0000:03:00.0: supports D1 D2 [ 0.270114] pci 0000:03:00.1: reg 10 64bit mmio: [0xfddfc000-0xfddfffff] [ 0.270140] pci 0000:03:00.1: supports D1 D2 [ 0.272056] pci 0000:00:0f.0: bridge io port: [0x6000-0x6fff] [ 0.272058] pci 0000:00:0f.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.272061] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.272068] pci_bus 0000:00: on NUMA node 0 [ 0.272074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.272358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.333090] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333296] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 0.333503] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333709] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.333914] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334126] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 0.334333] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) [ 0.334539] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334747] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.334953] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.335168] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.335375] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15) [ 0.335581] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.335787] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336001] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336203] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336410] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.336617] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.336821] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) [ 0.337034] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15) [ 0.337277] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.337520] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.337759] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.338007] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.338245] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.338479] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.338718] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.338945] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.339192] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.339432] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.339671] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 [ 0.339911] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.340159] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.340398] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.340637] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.340876] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.341118] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.341357] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.341599] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.341840] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.342256] usbcore: registered new interface driver usbfs [ 0.342321] usbcore: registered new interface driver hub [ 0.342370] usbcore: registered new device driver usb [ 0.342499] PCI: Using ACPI for IRQ routing [ 0.346018] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.346021] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.352006] pnp: PnP ACPI init [ 0.352011] ACPI: bus type pnp registered [ 0.358206] pnp: PnP ACPI: found 13 devices [ 0.358208] ACPI: ACPI bus type pnp unregistered [ 0.358216] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.358218] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.358221] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.358223] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.358225] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.358228] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.358233] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.358235] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.358237] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.358244] system 00:0b: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.358249] system 00:0c: iomem range 0xcf000-0xcffff has been reserved [ 0.358251] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.358253] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.358256] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.358258] system 00:0c: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.358261] system 00:0c: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 0.358263] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.358265] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.358268] system 00:0c: iomem range 0x100000-0xdfedffff could not be reserved [ 0.358270] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.358273] system 00:0c: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.358276] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.358278] system 00:0c: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.358281] system 00:0c: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.358283] system 00:0c: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.393245] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.393248] pci 0000:00:06.0: IO window: 0x9000-0x9fff [ 0.393250] pci 0000:00:06.0: MEM window: 0xfa000000-0xfcffffff [ 0.393253] pci 0000:00:06.0: PREFETCH window: disabled [ 0.393255] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 0.393257] pci 0000:00:0e.0: IO window: 0x7000-0x8fff [ 0.393260] pci 0000:00:0e.0: MEM window: 0xfde00000-0xfdefffff [ 0.393262] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.393265] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03 [ 0.393267] pci 0000:00:0f.0: IO window: 0x6000-0x6fff [ 0.393269] pci 0000:00:0f.0: MEM window: 0xfdd00000-0xfddfffff [ 0.393272] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.393278] pci 0000:00:06.0: setting latency timer to 64 [ 0.393282] pci 0000:00:0e.0: setting latency timer to 64 [ 0.393286] pci 0000:00:0f.0: setting latency timer to 64 [ 0.393288] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.393290] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.393293] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.393295] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff] [ 0.393296] pci_bus 0000:01: resource 2 mem: [0x0-0x0] [ 0.393298] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.393300] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.393302] pci_bus 0000:02: resource 0 io: [0x7000-0x8fff] [ 0.393304] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.393306] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 0.393307] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.393309] pci_bus 0000:03: resource 0 io: [0x6000-0x6fff] [ 0.393311] pci_bus 0000:03: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.393313] pci_bus 0000:03: resource 2 mem: [0xe0000000-0xefffffff] [ 0.393314] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.393365] NET: Registered protocol family 2 [ 0.409079] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.409358] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.409819] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.410073] TCP: Hash tables configured (established 131072 bind 65536) [ 0.410075] TCP reno registered [ 0.415099] NET: Registered protocol family 1 [ 0.415221] checking if image is initramfs...<7>Switched to high resolution mode on CPU 2 [ 0.500751] Switched to high resolution mode on CPU 3 [ 0.500802] Switched to high resolution mode on CPU 1 [ 0.501039] Switched to high resolution mode on CPU 0 [ 0.518178] it is [ 0.627417] Freeing initrd memory: 3026k freed [ 0.628768] Scanning for low memory corruption every 60 seconds [ 0.628924] audit: initializing netlink socket (disabled) [ 0.628939] type=2000 audit(1233237483.628:1): initialized [ 0.629340] highmem bounce pool size: 64 pages [ 0.629344] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.629531] msgmni has been set to 1697 [ 0.629777] alg: No test for stdrng (krng) [ 0.629834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.629837] io scheduler noop registered [ 0.629857] io scheduler cfq registered (default) [ 0.642787] pci 0000:03:00.0: Boot video device [ 0.642906] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 0.643020] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 0.643259] fan PNP0C0B:00: registered as cooling_device0 [ 0.643262] ACPI: Fan [FAN] (on) [ 0.643749] processor ACPI_CPU:00: registered as cooling_device1 [ 0.643802] processor ACPI_CPU:01: registered as cooling_device2 [ 0.643852] processor ACPI_CPU:02: registered as cooling_device3 [ 0.643904] processor ACPI_CPU:03: registered as cooling_device4 [ 0.644400] ACPI Warning (nspredef-0940): \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20081204] [ 0.644406] ACPI: Expecting a [Reference] package element, found type 0 [ 0.644436] ACPI: Invalid passive threshold [ 0.644665] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.645131] ACPI: Thermal Zone [THRM] (40 C) [ 0.647800] Real Time Clock Driver v1.12b [ 0.648015] Non-volatile memory driver v1.3 [ 0.648018] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.648128] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.648480] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.649974] brd: module loaded [ 0.650197] PNP: No PS/2 controller found. Probing ports directly. [ 0.650603] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.650608] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.650691] mice: PS/2 mouse device common for all mice [ 0.650842] cpuidle: using governor ladder [ 0.651623] usbcore: registered new interface driver hiddev [ 0.651655] usbcore: registered new interface driver usbhid [ 0.651657] usbhid: v2.6:USB HID core driver [ 0.651900] TCP cubic registered [ 0.651901] Initializing XFRM netlink socket [ 0.651914] NET: Registered protocol family 17 [ 0.651933] Using IPI Shortcut mode [ 0.652309] Freeing unused kernel memory: 336k freed [ 0.908633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.909040] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 0.909051] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 0.909076] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.909078] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.909185] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.909211] ehci_hcd 0000:00:02.1: debug port 1 [ 0.909214] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.909229] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 0.915016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.915036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.915038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915040] usb usb1: Product: EHCI Host Controller [ 0.915041] usb usb1: Manufacturer: Linux 2.6.29-rc3 ehci_hcd [ 0.915043] usb usb1: SerialNumber: 0000:00:02.1 [ 0.915100] usb usb1: configuration #1 chosen from 1 choice [ 0.915135] hub 1-0:1.0: USB hub found [ 0.915141] hub 1-0:1.0: 10 ports detected [ 0.917391] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.917790] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.917800] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 0.917822] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.917824] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.917901] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.917924] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.970291] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.970293] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.970295] usb usb2: Product: OHCI Host Controller [ 0.970297] usb usb2: Manufacturer: Linux 2.6.29-rc3 ohci_hcd [ 0.970298] usb usb2: SerialNumber: 0000:00:02.0 [ 0.970357] usb usb2: configuration #1 chosen from 1 choice [ 0.970399] hub 2-0:1.0: USB hub found [ 0.970407] hub 2-0:1.0: 10 ports detected [ 0.972570] uhci_hcd: USB Universal Host Controller Interface driver [ 0.993209] SCSI subsystem initialized [ 0.996215] Driver 'sd' needs updating - please use bus_type methods [ 1.009197] libata version 3.00 loaded. [ 1.011423] pata_amd 0000:00:04.0: version 0.3.11 [ 1.011457] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.011513] scsi0 : pata_amd [ 1.011604] scsi1 : pata_amd [ 1.012368] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.012371] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.385343] ata1.00: ATA-7: MAXTOR STM3320620A, 3.AAE, max UDMA/100 [ 1.385345] ata1.00: 625142448 sectors, multi 1: LBA48 [ 1.385380] ata1.01: ATAPI: HP DVD Writer 1040d, EH24, max UDMA/66 [ 1.385405] ata1: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x1f) [ 1.385409] ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x1f) [ 1.460297] ata1.00: configured for UDMA/100 [ 1.473144] usb 1-10: new high speed USB device using ehci_hcd and address 5 [ 1.482579] ata1.01: configured for UDMA/66 [ 1.483344] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5 [ 1.483460] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.483471] sd 0:0:0:0: [sda] Write Protect is off [ 1.483473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.483536] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 1.483546] sd 0:0:0:0: [sda] Write Protect is off [ 1.483548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.483568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.483570] sda: sda1 sda2 sda3 [ 1.508481] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.509557] scsi 0:0:1:0: CD-ROM HP DVD Writer 1040d EH24 PQ: 0 ANSI: 5 [ 1.509684] ata2: port disabled. ignoring. [ 1.586884] usb 1-10: New USB device found, idVendor=0409, idProduct=0059 [ 1.586886] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.586944] usb 1-10: configuration #1 chosen from 1 choice [ 1.587043] hub 1-10:1.0: USB hub found [ 1.587131] hub 1-10:1.0: 4 ports detected [ 1.804393] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 1.954664] usb 2-2: New USB device found, idVendor=04b8, idProduct=0005 [ 1.954666] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.954668] usb 2-2: Product: USB Printer [ 1.954671] usb 2-2: Manufacturer: EPSON [ 1.954673] usb 2-2: SerialNumber: RL0200301161041200 [ 1.954731] usb 2-2: configuration #1 chosen from 1 choice [ 2.174391] usb 2-4: new low speed USB device using ohci_hcd and address 3 [ 2.319804] usb 2-4: New USB device found, idVendor=046d, idProduct=c517 [ 2.319806] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.319808] usb 2-4: Product: USB Receiver [ 2.319812] usb 2-4: Manufacturer: Logitech [ 2.319861] usb 2-4: configuration #1 chosen from 1 choice [ 2.330012] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input0 [ 2.335432] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-4/input0 [ 2.343813] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 2.344369] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input1 [ 2.355486] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input1 [ 2.572392] usb 2-5: new full speed USB device using ohci_hcd and address 4 [ 2.707956] usb 2-5: New USB device found, idVendor=0451, idProduct=2046 [ 2.707958] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.708016] usb 2-5: configuration #1 chosen from 1 choice [ 2.710989] hub 2-5:1.0: USB hub found [ 2.713957] hub 2-5:1.0: 4 ports detected [ 2.806111] usb 1-10.1: new low speed USB device using ehci_hcd and address 6 [ 3.011934] usb 1-10.1: New USB device found, idVendor=050d, idProduct=0751 [ 3.011937] usb 1-10.1: New USB device strings: Mfr=4, Product=20, SerialNumber=0 [ 3.011939] usb 1-10.1: Product: Belkin UPS [ 3.011940] usb 1-10.1: Manufacturer: Belkin [ 3.011990] usb 1-10.1: configuration #1 chosen from 1 choice [ 3.715643] generic-usb 0003:050D:0751.0003: hiddev97,hidraw2: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.1-10.1/input0 [ 3.792500] usb 1-10.2: new full speed USB device using ehci_hcd and address 7 [ 3.891527] usb 1-10.2: New USB device found, idVendor=0403, idProduct=6001 [ 3.891529] usb 1-10.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.891531] usb 1-10.2: Product: USB FAST SERIAL ADAPTER [ 3.891532] usb 1-10.2: Manufacturer: FTDI [ 3.891534] usb 1-10.2: SerialNumber: FTOOS09N [ 3.891588] usb 1-10.2: configuration #1 chosen from 1 choice [ 3.968562] usb 1-10.3: new full speed USB device using ehci_hcd and address 8 [ 4.013902] sata_nv 0000:00:05.0: version 3.5 [ 4.014319] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 4.014329] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 4.014331] sata_nv 0000:00:05.0: Using SWNCQ mode [ 4.014631] sata_nv 0000:00:05.0: setting latency timer to 64 [ 4.014814] scsi2 : sata_nv [ 4.014982] scsi3 : sata_nv [ 4.015185] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21 [ 4.015187] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21 [ 4.056463] usb 1-10.3: New USB device found, idVendor=03eb, idProduct=3301 [ 4.056466] usb 1-10.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.056468] usb 1-10.3: Product: Standard USB Hub [ 4.056535] usb 1-10.3: configuration #1 chosen from 1 choice [ 4.057237] hub 1-10.3:1.0: USB hub found [ 4.057337] hub 1-10.3:1.0: 4 ports detected [ 4.131624] usb 1-10.4: new high speed USB device using ehci_hcd and address 9 [ 4.218900] usb 1-10.4: New USB device found, idVendor=0409, idProduct=0059 [ 4.218902] usb 1-10.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.218951] usb 1-10.4: configuration #1 chosen from 1 choice [ 4.219058] hub 1-10.4:1.0: USB hub found [ 4.219150] hub 1-10.4:1.0: 4 ports detected [ 4.492764] usb 1-10.4.4: new full speed USB device using ehci_hcd and address 10 [ 4.580914] usb 1-10.4.4: New USB device found, idVendor=04b8, idProduct=010f [ 4.580916] usb 1-10.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.580918] usb 1-10.4.4: Product: EPSON Scanner 010F [ 4.580922] usb 1-10.4.4: Manufacturer: EPSON [ 4.580972] usb 1-10.4.4: configuration #1 chosen from 1 choice [ 4.888293] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.891745] ata3.00: ATA-8: ST3500320AS, SD1A, max UDMA/133 [ 4.891748] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 4.897882] ata3.00: configured for UDMA/133 [ 4.897958] scsi 2:0:0:0: Direct-Access ATA ST3500320AS SD1A PQ: 0 ANSI: 5 [ 4.898065] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.898075] sd 2:0:0:0: [sdb] Write Protect is off [ 4.898077] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.898090] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.898146] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 4.898154] sd 2:0:0:0: [sdb] Write Protect is off [ 4.898156] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.898169] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.898176] sdb: sdb1 sdb2 sdb3 [ 4.902253] sd 2:0:0:0: [sdb] Attached SCSI disk [ 5.776289] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.779557] ata4.00: ATA-7: Hitachi HDT725040VLA360, V5COA7EA, max UDMA/133 [ 5.779559] ata4.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 5.785699] ata4.00: configured for UDMA/133 [ 5.785762] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5 [ 5.785871] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 5.785881] sd 3:0:0:0: [sdc] Write Protect is off [ 5.785884] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.785897] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.785938] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors: (400 GB/372 GiB) [ 5.785951] sd 3:0:0:0: [sdc] Write Protect is off [ 5.785953] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.785970] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.785977] sdc: sdc1 [ 5.800177] sd 3:0:0:0: [sdc] Attached SCSI disk [ 5.800653] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 5.800663] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 5.800666] sata_nv 0000:00:05.1: Using SWNCQ mode [ 5.800949] sata_nv 0000:00:05.1: setting latency timer to 64 [ 5.801049] scsi4 : sata_nv [ 5.801136] scsi5 : sata_nv [ 5.801352] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20 [ 5.801354] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20 [ 6.534602] ata5: SATA link down (SStatus 0 SControl 300) [ 7.267599] ata6: SATA link down (SStatus 0 SControl 300) [ 7.267976] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23 [ 7.267979] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23 [ 7.267981] sata_nv 0000:00:05.2: Using SWNCQ mode [ 7.268258] sata_nv 0000:00:05.2: setting latency timer to 64 [ 7.268325] scsi6 : sata_nv [ 7.268412] scsi7 : sata_nv [ 7.268600] ata7: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23 [ 7.268602] ata8: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23 [ 8.001600] ata7: SATA link down (SStatus 0 SControl 300) [ 8.734600] ata8: SATA link down (SStatus 0 SControl 300) [ 16.553155] kjournald starting. Commit interval 5 seconds [ 16.553163] EXT3-fs: mounted filesystem with ordered data mode. [ 16.848493] type=1404 audit(1233237499.848:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 16.988931] SELinux: 8192 avtab hash slots, 228199 rules. [ 17.027461] SELinux: 8192 avtab hash slots, 228199 rules. [ 17.055730] SELinux: 8 users, 12 roles, 2519 types, 116 bools, 1 sens, 1024 cats [ 17.055734] SELinux: 67 classes, 228199 rules [ 17.057544] SELinux: class peer not defined in policy [ 17.057546] SELinux: class capability2 not defined in policy [ 17.057548] SELinux: class kernel_service not defined in policy [ 17.057556] SELinux: permission open in class dir not defined in policy [ 17.057559] SELinux: permission open in class file not defined in policy [ 17.057562] SELinux: permission open in class chr_file not defined in policy [ 17.057564] SELinux: permission open in class blk_file not defined in policy [ 17.057566] SELinux: permission open in class fifo_file not defined in policy [ 17.057574] SELinux: permission recvfrom in class node not defined in policy [ 17.057576] SELinux: permission sendto in class node not defined in policy [ 17.057581] SELinux: permission ingress in class netif not defined in policy [ 17.057583] SELinux: permission egress in class netif not defined in policy [ 17.057618] SELinux: permission setfcap in class capability not defined in policy [ 17.057631] SELinux: permission forward_in in class packet not defined in policy [ 17.057633] SELinux: permission forward_out in class packet not defined in policy [ 17.057736] SELinux: the above unknown classes and permissions will be allowed [ 17.057739] SELinux: Completing initialization. [ 17.057740] SELinux: Setting up existing superblocks. [ 17.079797] SELinux: initialized (dev sdb3, type ext3), uses xattr [ 17.179519] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 17.179530] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 17.179617] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 17.179638] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 17.179646] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 17.179651] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 17.179659] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 17.179662] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 17.179669] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 17.179673] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 17.179678] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 17.179699] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 17.179706] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 17.179716] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 17.179720] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 17.179736] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 17.198294] type=1403 audit(1233237500.198:3): policy loaded auid=4294967295 ses=4294967295 [ 19.612241] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 19.612262] scsi 0:0:1:0: Attached scsi generic sg1 type 5 [ 19.612283] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 19.612304] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 19.615133] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 19.618493] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 19.637069] ACPI: Power Button (FF) [PWRF] [ 19.637127] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 19.647421] ACPI: Power Button (CM) [PWRB] [ 19.657024] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 19.657030] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45] [ 19.657033] ACPI: Device needs an ACPI driver [ 19.657044] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 19.661559] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 19.661579] usbcore: registered new interface driver usblp [ 19.717285] usbcore: registered new interface driver usbserial [ 19.717290] usbserial: USB Serial Driver core [ 19.722841] Driver 'sr' needs updating - please use bus_type methods [ 19.724161] Floppy drive(s): fd0 is 1.44M [ 19.727130] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62. [ 19.727651] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 19.727656] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 19.727660] forcedeth 0000:00:08.0: setting latency timer to 64 [ 19.727809] nv_probe: set workaround bit for reversed mac addr [ 19.730916] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 19.730921] Uniform CD-ROM driver Revision: 3.20 [ 19.731058] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 19.731609] USB Serial support registered for FTDI USB Serial Device [ 19.731672] ftdi_sio 1-10.2:1.0: FTDI USB Serial Device converter detected [ 19.731701] usb 1-10.2: Detected FT232RL [ 19.731763] usb 1-10.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 19.731791] usbcore: registered new interface driver ftdi_sio [ 19.731793] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver [ 19.739000] FDC 0 is a post-1991 82077 [ 19.914729] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 19.914740] firewire_ohci 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 19.933388] Linux video capture interface: v2.00 [ 19.972143] firewire_ohci: Added fw-ohci device 0000:01:0b.0, OHCI version 1.10 [ 20.117893] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 20.118523] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected], frontend(s): 1 [ 20.118525] cx88[0]: TV tuner type 60, Radio tuner type -1 [ 20.134243] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 20.239869] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1f:c6:62:fc:bb [ 20.239873] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 20.240309] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 20.240314] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 20.240367] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 20.255696] tuner' 2-0043: chip found @ 0x86 (cx88[0]) [ 20.268128] tda9887 2-0043: creating new instance [ 20.268131] tda9887 2-0043: tda988[5/6/7] found [ 20.271280] tuner' 2-0061: chip found @ 0xc2 (cx88[0]) [ 20.324983] tuner-simple 2-0061: creating new instance [ 20.324987] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC)) [ 20.327300] cx88[0]/2: cx2388x 8802 Driver Manager [ 20.327715] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 20.327725] cx88-mpeg driver manager 0000:01:08.2: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 20.327732] cx88[0]/2: found at 0000:01:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xfa000000 [ 20.327736] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.327790] cx8800 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 20.327799] cx88[0]/0: found at 0000:01:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xfb000000 [ 20.327808] IRQ 18/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 20.327869] cx88[0]/0: registered device video0 [v4l2] [ 20.327885] cx88[0]/0: registered device vbi0 [ 20.327903] cx88[0]/0: registered device radio0 [ 20.330282] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 20.330295] EMU10K1_Audigy 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 20.332520] Audigy2 value: Special config. [ 20.346268] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 20.346272] cx88/2: registering cx8802 driver, type: dvb access: shared [ 20.346276] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22] [ 20.346278] cx88[0]/2: cx2388x based DVB/ATSC card [ 20.346287] BUG: unable to handle kernel NULL pointer dereference at (null) [ 20.346358] IP: [<c061d77d>] __mutex_lock_slowpath+0x2d/0xa0 [ 20.346413] *pdpt = 000000003582c001 *pde = 0000000000000000 [ 20.346417] Oops: 0002 [#1] PREEMPT SMP [ 20.346502] last sysfs file: /sys/devices/pci0000:00/0000:00:06.0/0000:01:08.0/video4linux/vbi0/dev [ 20.346532] Modules linked in: cx88_dvb(+) videobuf_dvb dvb_core tuner_simple tuner_types tda9887 tda8290 tuner snd_emu10k1 snd_hda_intel(+) snd_seq_dummy snd_hda_codec cx8800 snd_seq_oss(+) cx8802 cx88xx snd_seq_midi_event snd_rawmidi snd_seq snd_ac97_codec ir_common snd_pcm_oss snd_mixer_oss ac97_bus v4l2_common snd_seq_device videodev i2c_algo_bit snd_pcm firewire_ohci snd_util_mem firewire_core tveeprom v4l1_compat snd_hwdep btcx_risc videobuf_dma_sg snd_timer videobuf_core crc_itu_t snd ftdi_sio forcedeth(+) floppy sr_mod usbserial snd_page_alloc i2c_nforce2 soundcore usblp cdrom button pcspkr sg i2c_core joydev evdev ahci pata_jmicron sata_nv pata_amd libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 20.347382] [ 20.347382] Pid: 1797, comm: modprobe Tainted: G W (2.6.29-rc3 #3) System Product Name [ 20.347382] EIP: 0060:[<c061d77d>] EFLAGS: 00010246 CPU: 3 [ 20.347382] EIP is at __mutex_lock_slowpath+0x2d/0xa0 [ 20.347382] EAX: f5dc3e48 EBX: f5901904 ECX: f5901804 EDX: 00000000 [ 20.347382] ESI: f5901908 EDI: f590190c EBP: f5dc3e60 ESP: f5dc3e44 [ 20.347382] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 20.347382] Process modprobe (pid: 1797, ti=f5dc3000 task=f5c851f0 task.ti=f5dc3000) [ 20.347382] Stack: [ 20.347382] f5c851f0 f590190c f5dc3e7a c0684f05 f59018fc f5d62800 00000001 f5dc3e68 [ 20.347382] c061d59d f5dc3e80 f8435148 f5901904 ffffffed f5d62800 00000001 f5dc3ecc [ 20.347382] f8446457 f8449214 f5d62810 0005489c 00000000 14a3a42f 00000006 00000202 [ 20.347382] Call Trace: [ 20.347382] [<c061d59d>] ? mutex_lock+0xd/0x10 [ 20.347382] [<f8435148>] ? videobuf_dvb_get_frontend+0x18/0x60 [videobuf_dvb] [ 20.347382] [<f8446457>] ? cx8802_dvb_probe+0xe7/0x1fc0 [cx88_dvb] [ 20.347382] [<f84460f0>] ? cx8802_dvb_advise_release+0x0/0x70 [cx88_dvb] [ 20.347382] [<f8561534>] ? cx8802_register_driver+0x1a4/0x1f0 [cx8802] [ 20.347382] [<f84483c0>] ? dvb_init+0x0/0x40 [cx88_dvb] [ 20.347382] [<f84483f4>] ? dvb_init+0x34/0x40 [cx88_dvb] [ 20.347382] [<c040102a>] ? _stext+0x2a/0x150 [ 20.347382] [<c044df83>] ? sys_init_module+0x83/0x1b0 [ 20.347382] [<c04878fd>] ? sys_read+0x3d/0x70 [ 20.347382] [<c04032ed>] ? sysenter_do_call+0x12/0x21 [ 20.347382] Code: e5 57 56 53 89 c3 8d 73 04 83 ec 10 8d 7b 08 64 a1 00 a0 75 c0 89 45 e4 89 f0 e8 1f 10 00 00 8b 57 04 8d 45 e8 89 47 04 89 7d e8 <89> 02 8b 45 e4 89 55 ec ba ff ff ff ff 89 45 f0 89 d0 87 03 83 [ 20.347382] EIP: [<c061d77d>] __mutex_lock_slowpath+0x2d/0xa0 SS:ESP 0068:f5dc3e44 [ 20.352096] ---[ end trace 4eaa2a86a8e2da24 ]--- [ 20.352149] note: modprobe[1797] exited with preempt_count 1 [ 20.471504] firewire_core: created device fw0: GUID 001e8c00012f990c, S400 [ 20.926787] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20 [ 20.926854] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20 [ 20.926941] forcedeth 0000:00:09.0: setting latency timer to 64 [ 20.927070] nv_probe: set workaround bit for reversed mac addr [ 20.927249] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 20.927325] HDA Intel 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 20.927461] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 21.439857] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1f:c6:63:07:97 [ 21.439960] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 23.557884] EXT3 FS on sdb3, internal journal [ 23.841251] kjournald starting. Commit interval 5 seconds [ 23.841606] EXT3 FS on sdb1, internal journal [ 23.841691] EXT3-fs: mounted filesystem with ordered data mode. [ 23.849577] SELinux: initialized (dev sdb1, type ext3), uses xattr [ 23.859120] kjournald starting. Commit interval 5 seconds [ 23.859389] EXT3 FS on sdc1, internal journal [ 23.859471] EXT3-fs: mounted filesystem with ordered data mode. [ 23.866039] SELinux: initialized (dev sdc1, type ext3), uses xattr [ 23.866308] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 24.790477] Adding 4192956k swap on /dev/sdb2. Priority:-1 extents:1 across:4192956k [ 24.793212] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-01-29 15:34 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-01-28 23:16 Linux 2.6.29-rc3 Hubert Tonneau -- strict thread matches above, loose matches on Subject: below -- 2009-01-28 19:41 Linus Torvalds 2009-01-29 15:34 ` Gene Heskett
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox