The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org, "Antoine Tenart" <atenart@kernel.org>,
	devicetree@vger.kernel.org, "Conor Dooley" <conor+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Romain Gantois" <romain.gantois@bootlin.com>,
	"Daniel Golle" <daniel@makrotopia.org>,
	"Dimitri Fedrau" <dimitri.fedrau@liebherr.com>
Subject: Re: [PATCH net-next v12 11/18] net: phy: marvell-88x2222: Support SFP through phy_port interface
Date: Wed, 17 Sep 2025 09:01:44 +0200	[thread overview]
Message-ID: <09bdcede-a6e6-4fee-8cd1-d351ed64ca58@csgroup.eu> (raw)
In-Reply-To: <20250909152617.119554-12-maxime.chevallier@bootlin.com>



Le 09/09/2025 à 17:26, Maxime Chevallier a écrit :
> The 88x2222 PHY from Marvell only supports serialised modes as its
> line-facing interfaces. Convert that driver to the generic phylib SFP
> handling.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>

> ---
>   drivers/net/phy/marvell-88x2222.c | 95 +++++++++++++------------------
>   1 file changed, 38 insertions(+), 57 deletions(-)
> 
> diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
> index fad2f54c1eac..ba1bbb6c63d6 100644
> --- a/drivers/net/phy/marvell-88x2222.c
> +++ b/drivers/net/phy/marvell-88x2222.c
> @@ -13,7 +13,7 @@
>   #include <linux/mdio.h>
>   #include <linux/marvell_phy.h>
>   #include <linux/of.h>
> -#include <linux/sfp.h>
> +#include <linux/phy_port.h>
>   #include <linux/netdevice.h>
>   
>   /* Port PCS Configuration */
> @@ -473,90 +473,70 @@ static int mv2222_config_init(struct phy_device *phydev)
>   	return 0;
>   }
>   
> -static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
> +static int mv2222_configure_serdes(struct phy_port *port, bool enable,
> +				   phy_interface_t interface)
>   {
> -	DECLARE_PHY_INTERFACE_MASK(interfaces);
> -	struct phy_device *phydev = upstream;
> -	phy_interface_t sfp_interface;
> +	struct phy_device *phydev = port_phydev(port);
>   	struct mv2222_data *priv;
> -	struct device *dev;
> -	int ret;
> -
> -	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_supported) = { 0, };
> +	int ret = 0;
>   
>   	priv = phydev->priv;
> -	dev = &phydev->mdio.dev;
> -
> -	sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces);
> -	phydev->port = sfp_parse_port(phydev->sfp_bus, id, sfp_supported);
> -	sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
> -
> -	dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
> +	priv->line_interface = interface;
>   
> -	if (sfp_interface != PHY_INTERFACE_MODE_10GBASER &&
> -	    sfp_interface != PHY_INTERFACE_MODE_1000BASEX &&
> -	    sfp_interface != PHY_INTERFACE_MODE_SGMII) {
> -		dev_err(dev, "Incompatible SFP module inserted\n");
> +	if (enable) {
> +		linkmode_and(priv->supported, phydev->supported, port->supported);
>   
> -		return -EINVAL;
> -	}
> -
> -	priv->line_interface = sfp_interface;
> -	linkmode_and(priv->supported, phydev->supported, sfp_supported);
> +		ret = mv2222_config_line(phydev);
> +		if (ret < 0)
> +			return ret;
>   
> -	ret = mv2222_config_line(phydev);
> -	if (ret < 0)
> -		return ret;
> +		if (mutex_trylock(&phydev->lock)) {
> +			ret = mv2222_config_aneg(phydev);
> +			mutex_unlock(&phydev->lock);
> +		}
>   
> -	if (mutex_trylock(&phydev->lock)) {
> -		ret = mv2222_config_aneg(phydev);
> -		mutex_unlock(&phydev->lock);
> +	} else {
> +		linkmode_zero(priv->supported);
>   	}
>   
>   	return ret;
>   }
>   
> -static void mv2222_sfp_remove(void *upstream)
> +static void mv2222_port_link_up(struct phy_port *port)
>   {
> -	struct phy_device *phydev = upstream;
> -	struct mv2222_data *priv;
> -
> -	priv = phydev->priv;
> -
> -	priv->line_interface = PHY_INTERFACE_MODE_NA;
> -	linkmode_zero(priv->supported);
> -	phydev->port = PORT_NONE;
> -}
> -
> -static void mv2222_sfp_link_up(void *upstream)
> -{
> -	struct phy_device *phydev = upstream;
> +	struct phy_device *phydev = port_phydev(port);
>   	struct mv2222_data *priv;
>   
>   	priv = phydev->priv;
>   	priv->sfp_link = true;
>   }
>   
> -static void mv2222_sfp_link_down(void *upstream)
> +static void mv2222_port_link_down(struct phy_port *port)
>   {
> -	struct phy_device *phydev = upstream;
> +	struct phy_device *phydev = port_phydev(port);
>   	struct mv2222_data *priv;
>   
>   	priv = phydev->priv;
>   	priv->sfp_link = false;
>   }
>   
> -static const struct sfp_upstream_ops sfp_phy_ops = {
> -	.module_insert = mv2222_sfp_insert,
> -	.module_remove = mv2222_sfp_remove,
> -	.link_up = mv2222_sfp_link_up,
> -	.link_down = mv2222_sfp_link_down,
> -	.attach = phy_sfp_attach,
> -	.detach = phy_sfp_detach,
> -	.connect_phy = phy_sfp_connect_phy,
> -	.disconnect_phy = phy_sfp_disconnect_phy,
> +static const struct phy_port_ops mv2222_port_ops = {
> +	.link_up = mv2222_port_link_up,
> +	.link_down = mv2222_port_link_down,
> +	.configure_mii = mv2222_configure_serdes,
>   };
>   
> +static int mv2222_attach_mii_port(struct phy_device *phydev, struct phy_port *port)
> +{
> +	port->ops = &mv2222_port_ops;
> +
> +	__set_bit(PHY_INTERFACE_MODE_10GBASER, port->interfaces);
> +	__set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces);
> +	__set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces);
> +
> +	return 0;
> +}
> +
>   static int mv2222_probe(struct phy_device *phydev)
>   {
>   	struct device *dev = &phydev->mdio.dev;
> @@ -592,7 +572,7 @@ static int mv2222_probe(struct phy_device *phydev)
>   	priv->line_interface = PHY_INTERFACE_MODE_NA;
>   	phydev->priv = priv;
>   
> -	return phy_sfp_probe(phydev, &sfp_phy_ops);
> +	return 0;
>   }
>   
>   static struct phy_driver mv2222_drivers[] = {
> @@ -609,6 +589,7 @@ static struct phy_driver mv2222_drivers[] = {
>   		.suspend = mv2222_suspend,
>   		.resume = mv2222_resume,
>   		.read_status = mv2222_read_status,
> +		.attach_mii_port = mv2222_attach_mii_port,
>   	},
>   };
>   module_phy_driver(mv2222_drivers);


  reply	other threads:[~2025-09-17  7:20 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-09 15:25 [PATCH net-next v12 00/18] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-09-09 15:25 ` [PATCH net-next v12 01/18] dt-bindings: net: Introduce the ethernet-connector description Maxime Chevallier
2025-09-09 15:25 ` [PATCH net-next v12 02/18] net: ethtool: common: Indicate that BaseT works on up to 4 lanes Maxime Chevallier
2025-09-09 15:25 ` [PATCH net-next v12 03/18] net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values Maxime Chevallier
2025-09-09 15:26 ` [PATCH net-next v12 04/18] net: phy: Introduce PHY ports representation Maxime Chevallier
2025-09-17  6:59   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 05/18] net: phy: dp83822: Add support for phy_port representation Maxime Chevallier
2025-09-17  6:59   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 06/18] dt-bindings: net: dp83822: Deprecate ti,fiber-mode Maxime Chevallier
2025-09-17  7:00   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 07/18] net: phy: Create a phy_port for PHY-driven SFPs Maxime Chevallier
2025-09-09 15:26 ` [PATCH net-next v12 08/18] net: phylink: Move phylink_interface_max_speed to phy_caps Maxime Chevallier
2025-09-17  7:00   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 09/18] net: phylink: Move sfp interface selection and filtering " Maxime Chevallier
2025-09-11  0:59   ` kernel test robot
2025-09-17  7:01   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 10/18] net: phy: Introduce generic SFP handling for PHY drivers Maxime Chevallier
2025-09-09 15:26 ` [PATCH net-next v12 11/18] net: phy: marvell-88x2222: Support SFP through phy_port interface Maxime Chevallier
2025-09-17  7:01   ` Christophe Leroy [this message]
2025-09-09 15:26 ` [PATCH net-next v12 12/18] net: phy: marvell: " Maxime Chevallier
2025-09-17  7:02   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 13/18] net: phy: marvell10g: Support SFP through phy_port Maxime Chevallier
2025-09-17  7:02   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 14/18] net: phy: at803x: Support SFP through phy_port interface Maxime Chevallier
2025-09-17  7:02   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 15/18] net: phy: qca807x: " Maxime Chevallier
2025-09-17  7:03   ` Christophe Leroy
2025-09-09 15:26 ` [PATCH net-next v12 16/18] net: phy: Only rely on phy_port for PHY-driven SFP Maxime Chevallier
2025-09-09 15:26 ` [PATCH net-next v12 17/18] net: phy: dp83822: Add SFP support through the phy_port interface Maxime Chevallier
2025-09-09 15:26 ` [PATCH net-next v12 18/18] Documentation: networking: Document the phy_port infrastructure Maxime Chevallier
2025-09-10 10:22 ` [PATCH net-next v12 00/18] net: phy: Introduce PHY ports representation Oleksij Rempel
2025-09-10 22:19 ` Florian Fainelli
2025-09-17  7:04 ` Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=09bdcede-a6e6-4fee-8cd1-d351ed64ca58@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=daniel@makrotopia.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dimitri.fedrau@liebherr.com \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mwojtas@chromium.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicveronese@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=romain.gantois@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox