Re: IO errors after "block: remove bio_get_nr_vecs()"

["Artem S. Tashkinov" <t.artem@lycos.com>]

[-- Attachment #1: Type: text/plain, Size: 1355 bytes --]

On 2015-12-22 01:07, Tejun Heo wrote:
> Hello, Artem.
> 
> Can you please apply the following patch on top and see whether
> anything changes?  If it does make the issue go away, can you please
> revert the ".can_queue" part and test again?
> 
> Thanks.
> 
> ---
>  drivers/ata/ahci.h    |    2 +-
>  drivers/ata/libahci.c |    2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -365,7 +365,7 @@ extern struct device_attribute *ahci_sde
>   */
>  #define AHCI_SHT(drv_name)						\
>  	ATA_NCQ_SHT(drv_name),						\
> -	.can_queue		= AHCI_MAX_CMDS - 1,			\
> +	.can_queue		= 1/*AHCI_MAX_CMDS - 1*/,		\
>  	.sg_tablesize		= AHCI_MAX_SG,				\
>  	.dma_boundary		= AHCI_DMA_BOUNDARY,			\
>  	.shost_attrs		= ahci_shost_attrs,			\
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -420,7 +420,7 @@ void ahci_save_initial_config(struct dev
>  		hpriv->saved_cap2 = cap2 = 0;
> 
>  	/* some chips have errata preventing 64bit use */
> -	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
> +	if ((cap & HOST_CAP_64)/* && (hpriv->flags & 
> AHCI_HFLAG_32BIT_ONLY)*/) {
>  		dev_info(dev, "controller can't do 64bit DMA, forcing 32bit\n");
>  		cap &= ~HOST_CAP_64;
>  	}

With the ".can_queue" part left intact the bug resurfaced. Full dmesg 
output is attached.

[-- Attachment #2: dmesg.xz --]
[-- Type: application/x-xz, Size: 13616 bytes --]