* [PATCH] the nommu support for ARM linux 2.6.10
@ 2005-03-24 9:56 Hyok S. Choi
0 siblings, 0 replies; 2+ messages in thread
From: Hyok S. Choi @ 2005-03-24 9:56 UTC (permalink / raw)
To: linux-kernel, linux-arm-kernel, uClinux development list,
CE Linux Developers List
Cc: rmk
Hi all,
I'm glad to release the first MPU and NO-MMU support patch for ARM linux
2.6.10 at :
http://opensrc.sec.samsung.com/download/linux-2.6.10-hsc0.patch.gz
Previously, it was released as "armnommu" architecture which was called
uClinux/ARM and now is merged with "arm" architecture. You can select the
memory management type "MMU" for linux and "MPU" / "NONE" for uClinux at the
kernel configuration menu. Currently, the ATMEL, S5C7375, S3C24A0 platform
is tested.
I'm working on 2.6.11.5 patch, and it will be provided soon.
It would be great if you give me some suggestions.
Best Regards,
Hyok
----
HYOK S. CHOI
Digital Media R&D Center, Samsung Electronics Co.,Ltd.
tel: +82-31-200-8594/5723 fax: +82-31-200-3427
e-mail: hyok.choi@samsung.com
[Linux 2.6 MPU/noMMU Kernel Maintainer] http://opensrc.sec.samsung.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH] the nommu support for ARM linux 2.6.10
@ 2005-03-30 6:31 Hyok S. Choi
0 siblings, 0 replies; 2+ messages in thread
From: Hyok S. Choi @ 2005-03-30 6:31 UTC (permalink / raw)
To: linux-kernel
An updated MPU and noMMU support patch for ARM against linux 2.6.10 kernel
is available at :
http://opensrc.sec.samsung.com/download/linux-2.6.10-hsc1.patch.gz
You can select the memory management type "MPU" or "NONE" in the arm kernel
configuration menu, which was traditionally known as "armnommu" or
uClinux/ARM by 2.6.9. (sure, you can choose "MMU" for vanila Linux :-)
It's a different way from other uclinux arch. (i.e. m68knommu), which
enables simultaneous support to use "singular address space" support even
for MMU platforms.
You can choose "MMU" or "NONE" for your mmu based arm platform with a few
modification. i.e. virtual address --> physical address conversion.
the 2.6.11.6-hsc0 patch will be available in this week, and some benchmark
will be provided for both cases on a same h/w platform.
and addtional MPU support API is pending for some services like memory
protection, even for uClinux.
any suggesstions welcomed.
You can reach the project home at : http://opensrc.sec.samsung.com/
currently officially supported platforms are : s3c24a0, s5c7375, atmel,
espd_s3c510b, P2001, s3c3410, s3cb0x.
thanks for contribution : Tobias Lorenz and Jiun-Shian Ho
Regards,
Hyok
---
CHOI, HYOK-SUNG
Engineer (Kernel/System Architecture)
Digital Media R&D Center, Samsung Electronics Co.,Ltd.
tel: +82-31-200-8594 fax: +82-31-200-3427
e-mail: hyok.choi@samsung.com
[Linux 2.6 ARM MPU/noMMU Kernel Maintainer] http://opensrc.sec.samsung.com/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-03-30 6:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-24 9:56 [PATCH] the nommu support for ARM linux 2.6.10 Hyok S. Choi
-- strict thread matches above, loose matches on Subject: below --
2005-03-30 6:31 Hyok S. Choi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox