Re: [PATCH 2/3] Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse()

[Balakrishna Godavarthi <bgodavar@codeaurora.org>]

hi Matthias,

On 2019-02-26 17:48, Balakrishna Godavarthi wrote:
> On 2019-02-26 05:19, Matthias Kaehlcke wrote:
>> After sending a power on pulse the driver has a delay of 100ms
>> to allow the host controller to boot. Move the delay into
>> qca_send_power_pulse(), since it is directly related with the
>> power-on pulse.
>> 
>> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
>> ---
>>  drivers/bluetooth/hci_qca.c | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index e4128774e9686..eacc108c422d0 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1036,6 +1036,9 @@ static int qca_send_power_pulse(struct hci_uart
>> *hu, bool on)
>>  	usleep_range(100, 200);

[Bala] : i still doubt do we require this delay.

>>  	hci_uart_set_flow_control(hu, false);
>> 
>> +	if (on)
>> +		msleep(100);
>> +
>>  	return 0;
>>  }
>> 
>> @@ -1148,9 +1151,6 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>>  	if (ret)
>>  		return ret;
>> 
>> -	/* Wait for 100 ms for SoC to boot */
>> -	msleep(100);
>> -
>>  	/* Now the device is in ready state to communicate with host.
>>  	 * To sync host with device we need to reopen port.
>>  	 * Without this, we will have RTS and CTS synchronization
> 
> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>

-- 
Regards
Balakrishna.