[PATCH 1/3] [media] camss-csid: Use common error handling code in csid_set_power()

[SF Markus Elfring <elfring@users.sourceforge.net>]

From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 23 Sep 2017 20:48:33 +0200

Add jump targets so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/media/platform/qcom/camss-8x16/camss-csid.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/media/platform/qcom/camss-8x16/camss-csid.c b/drivers/media/platform/qcom/camss-8x16/camss-csid.c
index 64df82817de3..92d4dc6b4a66 100644
--- a/drivers/media/platform/qcom/camss-8x16/camss-csid.c
+++ b/drivers/media/platform/qcom/camss-8x16/camss-csid.c
@@ -330,13 +330,9 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
 		ret = csid_set_clock_rates(csid);
-		if (ret < 0) {
-			regulator_disable(csid->vdda);
-			return ret;
-		}
+		if (ret < 0)
+			goto disable_regulator;
 
 		ret = camss_enable_clocks(csid->nclocks, csid->clock, dev);
-		if (ret < 0) {
-			regulator_disable(csid->vdda);
-			return ret;
-		}
+		if (ret < 0)
+			goto disable_regulator;
 
 		enable_irq(csid->irq);
@@ -345,8 +341,7 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
 		if (ret < 0) {
 			disable_irq(csid->irq);
 			camss_disable_clocks(csid->nclocks, csid->clock);
-			regulator_disable(csid->vdda);
-			return ret;
+			goto disable_regulator;
 		}
 
 		hw_version = readl_relaxed(csid->base + CAMSS_CSID_HW_VERSION);
@@ -357,6 +352,11 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
 		ret = regulator_disable(csid->vdda);
 	}
 
+	goto exit;
+
+disable_regulator:
+	regulator_disable(csid->vdda);
+exit:
 	return ret;
 }
 
-- 
2.14.1