From: Xavier Bestel <xavier.bestel@free.fr>
To: Francois Romieu <romieu@cogenit.fr>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: freeze (2.4.17-pre/rc + Promise 20265)
Date: 14 Dec 2001 23:30:44 +0100 [thread overview]
Message-ID: <1008369045.1793.46.camel@nomade> (raw)
In-Reply-To: <20011214231932.A2949@se1.cogenit.fr>
In-Reply-To: <20011214231932.A2949@se1.cogenit.fr>
le ven 14-12-2001 à 23:19, Francois Romieu a écrit :
> As soon as a disk is present in the first slot of the Promise adapter the
> kernel locks during boot as shown below (no sysrq, no led, nothing)
> [...]
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: IDE controller on PCI bus 00 dev 39
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
> PDC20265: IDE controller on PCI bus 00 dev 60
> PDC20265: chipset revision 2
> ide: Found promise 20265 in RAID mode.
> PDC20265: not 100% native mode: will probe irqs later
> PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
> ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio <- appears
> [insert guru meditation here]
Click left mouse button to restart and disable ACPI
Xav
next prev parent reply other threads:[~2001-12-14 22:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-14 22:19 freeze (2.4.17-pre/rc + Promise 20265) Francois Romieu
2001-12-14 22:30 ` Xavier Bestel [this message]
2001-12-14 22:40 ` Xavier Bestel
2001-12-14 23:05 ` Francois Romieu
2001-12-14 23:09 ` Xavier Bestel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1008369045.1793.46.camel@nomade \
--to=xavier.bestel@free.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@cogenit.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox