From: Shawn Starr <spstarr@sh0n.net>
To: Linux <linux-kernel@vger.kernel.org>
Subject: [PROBLEM]: 2.4.18-rc1 - Unable to mount CD-ROM/RW
Date: 21 Feb 2002 12:40:35 -0500 [thread overview]
Message-ID: <1014313262.8811.25.camel@unaropia> (raw)
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPE3064AT, ATA DISK drive
hdb: WDC AC32500H, ATA DISK drive
hdc: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive <--------------------
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, (U)DMA
hdb: Disabling (U)DMA for WDC AC32500H
hdb: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=620/128/63
Partition check:
hda: hda1 hda2
hdb: hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0c.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xe880. Vers LK1.1.16
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: HP Model: T4000s Rev: 1.10
Type: Sequential-Access ANSI SCSI revision: 02
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: YAMAHA Model: CRW2100E Rev: 1.0N <----------------
Type: CD-ROM ANSI SCSI revision: 02
st: Version 20020205, bufsize 32768, wrt 30720, max init. bufs 4, s/g
segs 16
Attached scsi tape st0 at scsi0, channel 0, id 4, lun 0
When i attempt to mount /dev/cdrom (symlink to /dev/scd0) I get
mount: /dev/cdrom is not a valid block device (or /dev/scd0).
What broke? :-(
Shawn.
next reply other threads:[~2002-02-21 17:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-21 17:40 Shawn Starr [this message]
2002-02-21 19:09 ` [PROBLEM]: 2.4.18-rc1 - Unable to mount CD-ROM/RW Matt Reppert
[not found] <LI5YSPXWYTY04431V32LFIF97042TP.3c7534b4@jss>
2002-02-21 18:31 ` Shawn Starr
2002-02-21 19:57 ` Dan Chen
2002-02-21 20:29 ` Shawn Starr
-- strict thread matches above, loose matches on Subject: below --
2002-02-21 19:19 Brenneke, Matthew Jeffrey (UMR-Student)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1014313262.8811.25.camel@unaropia \
--to=spstarr@sh0n.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox