Inspecting /boot/System.map-2.4.18
Loaded 14295 symbols from /boot/System.map-2.4.18.
Symbols match kernel version 2.4.18.
No module symbols loaded.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.18 (root@Moby) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Sat Mar 30 20:12:07 EST 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
<4> BIOS-e820: 000000000bff0000 - 000000000bfff000 (ACPI data)
<4> BIOS-e820: 000000000bfff000 - 000000000c000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<4>found SMP MP-table at 000ff780
<4>hm, page 000ff000 reserved twice.
<4>hm, page 00100000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 49136
<4>zone(0): 4096 pages.
<4>zone(1): 45040 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.1
<4>    Virtual Wire compatibility mode.
<4>OEM ID: AMI      Product ID: CNB30LE      APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) Pro APIC version 17
<4>Processor #1 Pentium(tm) Pro APIC version 17
<4>I/O APIC #4 Version 17 at 0xFEC00000.
<4>I/O APIC #5 Version 17 at 0xFEC01000.
<4>Processors: 2
<4>Kernel command line: auto BOOT_IMAGE=Linux-2.4.18 ro root=802 BOOT_FILE=/boot/kernel-2.4.18
<6>Initializing CPU#0
<4>Detected 733.377 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1464.72 BogoMIPS
<4>Memory: 191132k/196544k available (1030k kernel code, 5024k reserved, 298k data, 216k init, 0k highmem)
<4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
<5>CPU serial number disabled.
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU:             Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<7>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU:             Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 03
<4>per-CPU timeslice cutoff: 731.61 usecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000004
<4>ESR value after enabling vector: 00000000
<4>Booting processor 1/1 eip 2000
<6>Initializing CPU#1
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 1464.72 BogoMIPS
<7>CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<7>CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
<5>CPU serial number disabled.
<6>Intel machine check reporting enabled on CPU#1.
<7>CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU:             Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU1: Intel Pentium III (Coppermine) stepping 03
<6>Total of 2 processors activated (2929.45 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<4>Setting 4 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 4 ... ok.
<4>Setting 5 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 5 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 4-0, 4-5, 4-9, 4-11, 5-0, 5-1, 5-2, 5-3, 5-5, 5-6, 5-7, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<3>..MP-BIOS bug: 8254 timer not connected to IO-APIC
<6>...trying to set up timer (IRQ0) through the 8259A ... 
<4>..... (found pin 0) ...works.
<7>number of MP IRQ sources: 16.
<7>number of IO-APIC #4 registers: 16.
<7>number of IO-APIC #5 registers: 16.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #4......
<7>.... register #00: 04000000
<7>.......    : physical APIC id: 04
<7>.... register #01: 000F0011
<7>.......     : max redirection entries: 000F
<7>.......     : PRQ implemented: 0
<7>.......     : IO APIC version: 0011
<7>.... register #02: 00000000
<7>.......     : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
<7> 00 003 03  0    0    0   0   0    1    1    31
<7> 01 003 03  0    0    0   0   0    1    1    39
<7> 02 000 00  1    0    0   0   0    0    0    00
<7> 03 003 03  0    0    0   0   0    1    1    41
<7> 04 003 03  0    0    0   0   0    1    1    49
<7> 05 000 00  1    0    0   0   0    0    0    00
<7> 06 003 03  0    0    0   0   0    1    1    51
<7> 07 003 03  0    0    0   0   0    1    1    59
<7> 08 003 03  0    0    0   0   0    1    1    61
<7> 09 000 00  1    0    0   0   0    0    0    00
<7> 0a 003 03  1    1    0   1   0    1    1    69
<7> 0b 000 00  1    0    0   0   0    0    0    00
<7> 0c 003 03  0    0    0   0   0    1    1    71
<7> 0d 003 03  0    0    0   0   0    1    1    79
<7> 0e 003 03  0    0    0   0   0    1    1    81
<7> 0f 003 03  0    0    0   0   0    1    1    89
<4>
<7>IO APIC #5......
<7>.... register #00: 05000000
<7>.......    : physical APIC id: 05
<7>.... register #01: 000F0011
<7>.......     : max redirection entries: 000F
<7>.......     : PRQ implemented: 0
<7>.......     : IO APIC version: 0011
<7>.... register #02: 01000000
<7>.......     : arbitration: 01
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
<7> 00 000 00  1    0    0   0   0    0    0    00
<7> 01 000 00  1    0    0   0   0    0    0    00
<7> 02 000 00  1    0    0   0   0    0    0    00
<7> 03 000 00  1    0    0   0   0    0    0    00
<7> 04 003 03  1    1    0   1   0    1    1    91
<7> 05 000 00  1    0    0   0   0    0    0    00
<7> 06 000 00  1    0    0   0   0    0    0    00
<7> 07 000 00  1    0    0   0   0    0    0    00
<7> 08 003 03  1    1    0   1   0    1    1    99
<7> 09 003 03  1    1    0   1   0    1    1    A1
<7> 0a 000 00  1    0    0   0   0    0    0    00
<7> 0b 000 00  1    0    0   0   0    0    0    00
<7> 0c 000 00  1    0    0   0   0    0    0    00
<7> 0d 000 00  1    0    0   0   0    0    0    00
<7> 0e 000 00  1    0    0   0   0    0    0    00
<7> 0f 000 00  1    0    0   0   0    0    0    00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ10 -> 0:10
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ20 -> 1:4
<7>IRQ24 -> 1:8
<7>IRQ25 -> 1:9
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 733.3550 MHz.
<4>..... host bus clock speed is 133.3369 MHz.
<4>cpu: 0, clocks: 1333369, slice: 444456
<4>CPU0<T0:1333360,T1:888896,D:8,S:444456,C:1333369>
<4>cpu: 1, clocks: 1333369, slice: 444456
<4>CPU1<T0:1333360,T1:444448,D:0,S:444456,C:1333369>
<4>checking TSC synchronization across CPUs: passed.
<4>Waiting on wait_init_idle (map = 0x2)
<4>All processors have done init_idle
<4>PCI: PCI BIOS revision 2.10 entry at 0xfdbb1, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Discovered primary peer bus 01 [IRQ]
<6>PCI: Using IRQ router default [1166/0009] at 00:00.0
<6>PCI->APIC IRQ transform: (B0,I2,P0) -> 20
<6>PCI->APIC IRQ transform: (B0,I15,P0) -> 10
<6>PCI->APIC IRQ transform: (B1,I5,P0) -> 24
<6>PCI->APIC IRQ transform: (B1,I5,P1) -> 25
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>block: 128 slots per queue, batch=32
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<4>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
<4>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
<6>eth0: OEM i82557/i82558 10/100 Ethernet, 00:E0:18:02:0C:98, IRQ 20.
<6>  Receiver lock-up bug exists -- enabling work-around.
<6>  Board assembly 668081-002, Physical connectors present: RJ45
<6>  Primary interface chip i82555 PHY #1.
<6>  General self-test: passed.
<6>  Serial sub-system self-test: passed.
<6>  Internal registers self-test: passed.
<6>  ROM checksum self-test: passed (0x04f4518b).
<6>  Receiver lock-up workaround activated.
<6>SCSI subsystem driver Revision: 1.00
<6>sym53c8xx: at PCI bus 1, device 5, function 1
<4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
<6>sym53c8xx: 53c1010-33 detected with Symbios NVRAM
<6>sym53c8xx: at PCI bus 1, device 5, function 0
<4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
<6>sym53c8xx: 53c1010-33 detected with Symbios NVRAM
<6>sym53c1010-33-0: rev 0x1 on pci bus 1 device 5 function 1 irq 25
<6>sym53c1010-33-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
<6>sym53c1010-33-0: on-chip RAM at 0xfebfc000
<6>sym53c1010-33-0: restart (scsi reset).
<6>sym53c1010-33-0: handling phase mismatch from SCRIPTS.
<4>sym53c1010-33-0: Downloading SCSI SCRIPTS.
<6>sym53c1010-33-1: rev 0x1 on pci bus 1 device 5 function 0 irq 24
<6>sym53c1010-33-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
<6>sym53c1010-33-1: on-chip RAM at 0xfebfa000
<6>sym53c1010-33-1: restart (scsi reset).
<6>sym53c1010-33-1: handling phase mismatch from SCRIPTS.
<4>sym53c1010-33-1: Downloading SCSI SCRIPTS.
<6>scsi0 : sym53c8xx-1.7.3c-20010512
<6>scsi1 : sym53c8xx-1.7.3c-20010512
<4>  Vendor: IBM       Model: DPSS-309170N      Rev: S80D
<4>  Type:   Direct-Access                      ANSI SCSI revision: 03
<6>sym53c1010-33-0-<0,0>: tagged command queue depth set to 4
<4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
<6>sym53c1010-33-0-<0,*>: FAST-80 WIDE SCSI 160.0 MB/s (12.5 ns, offset 62)
<4>SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
<6>Partition check:
<6> sda: sda1 sda2 sda3
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>IP: routing cache hash table of 1024 buckets, 8Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>reiserfs: checking transaction log (device 08:02) ...
<4>Warning, log replay starting on readonly filesystem
<4>reiserfs: replayed 19 transactions in 6 seconds
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>Freeing unused kernel memory: 216k freed
<6>Adding Swap: 281128k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.