From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 16 May 2002 05:59:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 16 May 2002 05:59:52 -0400 Received: from AMontpellier-201-1-3-85.abo.wanadoo.fr ([193.252.1.85]:21932 "EHLO awak") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Thu, 16 May 2002 05:59:52 -0400 Subject: Re: No Network after Compiling,2.4.19-pre8 under Debian Woody(Long Message) From: Xavier Bestel To: vda@port.imtp.ilyichevsk.odessa.ua Cc: Linux Kernel Mailing List In-Reply-To: <200205160919.g4G9J0Y16751@Port.imtp.ilyichevsk.odessa.ua> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT X-Mailer: Ximian Evolution 1.0.5 Date: 16 May 2002 11:59:08 +0200 Message-Id: <1021543152.17761.154.camel@bip> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Le jeu 16/05/2002 à 16:21, Denis Vlasenko a écrit : > On 16 May 2002 07:05, Xavier Bestel wrote: > > Le jeu 16/05/2002 ? 13:20, Denis Vlasenko a ?crit : > > > On 15 May 2002 14:38, Xavier Bestel wrote: > > > > Yes, it works at 10Mbit. But the driver doesn't do speed negociation, > > > > it doesn't even see the MII registers. However I think RTL8139 cards > > > > have MII registers. I quickly looked at the source but didn't see > > > > anything special. > > > > > > Becker's diag utils say there is *no* MII in RTL8139, just something > > > vaguely resembling that. I have trouble persuading 8139 to work in > > > 100mbit fdx, it insists on half duplex. :-( > > > > How do you do this ? Mine only accepts 10Mbits ... > > I tried with mii-diad and with rtl8139-diag. > > Tried too, rtl8139-diag set my nic to 10mbit and I could not boot > with NFS root anymore. 8-]. Brought DOS-based conf utility and > used it. I'll have a hard time using a dos util on my machines (linux-only, not even a floppy drive). Do you know where I can find these utils ? Xav