From: jan.lists@cionix.de
To: linux-kernel@vger.kernel.org
Subject: Very High Load on Disk Activity in 2.4.18 (and 2.4.18-pre8)
Date: Sat, 25 May 2002 14:26:47 +0200 [thread overview]
Message-ID: <1022329607.3cef83072437b@mail.cionix.de> (raw)
In-Reply-To: <20020525121737Z314546-22651+55555@vger.kernel.org>
Hello,
I'm experiencing a strange effect. As soons as there is some higher disk
activity (untarring the linux kernel is enough, which really should be no
problem) the system load gets really high (some times over 10) but the CPU
is 100% idle (reported by top).
Usually the system freezes for some minutes (but is still replying to pings)
and is after this period (when disk I/O is finished) fully usable again.
There are no error messages in all logfiles and nothing seems to be wrong
except of this _really_ annoying 3-10 minute freezes under high activity.
I definatly have no idea what to do. I'm very shure that my SCSI-wiring
and the other hardware ist ok. There a no error messages or warnings in
"dmesg" or the normal system logs.I run various Hardwaretest, all are ok.
I read about similar problems in earlier Version of 2.4.x Kernels but these
are reported to be fixed. Are any Problems in the Mylex drivers or the
kernels VM known (and hopefully work arounds) that can cause this
behaviour?
thanks in advance and sorry for my bad englisch.
regards
jan schreiber
More info about the machine:
- Mylex Accleraid 352 (flashed to latest firmware)
- Intel Pentium III 1,2 GHz, 512 MB Ram, Intel i815 Chipset
- 10 36 GB SCSI drives connected (8 on Channel 0, 2 on channel 1), no other
devices connected
- Build one RAID-5 Drive out of 9 disks, the 10 disk is spare
- three primary Partitons (512 MB swap, 2 GB system , rest data partiton
(approx 270 Gb)
- Running SuSE 8.0 Pro
- Kernel 2.4.18 (from suse, built a new vanilla 2.4.18 and pre8 with same
results)
- using reiserfs 3.6 on all Partitons (except swap of course)
Mit freundlichen Gruessen
cionix GmbH
Jan Schreiber
Geschäftsführer | chief executive officer
_____________________________________
cionix GmbH
Bredower Str. 45 D-14612 Falkensee
Tel: [+49] Ø3322.2336-10
Fax: [+49] Ø3322.2336-11
http://www.cionix.de eMail: js@cionix.de
_____________________________________
next parent reply other threads:[~2002-05-25 12:33 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20020525121737Z314546-22651+55555@vger.kernel.org>
2002-05-25 12:26 ` jan.lists [this message]
2002-05-29 12:21 ` Very High Load on Disk Activity in 2.4.18 (and 2.4.18-pre8) Denis Vlasenko
2002-05-30 9:19 ` Jan Schreiber
2002-05-31 22:26 ` Mike Fedyk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1022329607.3cef83072437b@mail.cionix.de \
--to=jan.lists@cionix.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox