* 2.6.8-rc1-mm1
@ 2004-07-14 1:25 Andrew Morton
2004-07-14 7:29 ` 2.6.8-rc1-mm1 Andrew Morton
` (9 more replies)
0 siblings, 10 replies; 19+ messages in thread
From: Andrew Morton @ 2004-07-14 1:25 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/
- Lots of little fixes, mainly
- Numerous scheduling latency fixes, mainly in the ext3 area.
This is a first pass - these patches need redoing and a bit of
infrastructure consolidation.
- Outta here: I won't be in a position to handle patches until July 26. Off
to http://www.tech-forum.org/upcoming/open_source_software_06-10-04.htm and
then Kernel Summit and then OLS.
Changes since 2.6.7-mm7:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-dma-declare-coherent-memory.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ieee1394.patch
bk-input.patch
bk-jfs.patch
bk-libata.patch
bk-mpc52xx.patch
bk-netdev.patch
bk-ntfs.patch
bk-pnp.patch
bk-scsi.patch
bk-usb.patch
External trees
-jfs_dmap-build-fix.patch
-bfusb-hack.patch
-quota-iflags-locking-fix.patch
-ppc64-out-of-line-some-user-copy-routines.patch
-clean-up-module-install-rules.patch
-kbuild-sort-modules-for-modpost-and-modinst.patch
-intrinsic-automount-and-mountpoint-degradation-support.patch
-intrinsic-automount-and-mountpoint-degradation-support-fix.patch
-kafs-automount-support.patch
-kafs-automount-support-build-fix.patch
-ia64-audit-support.patch
-more-mca_legacy-dependencies.patch
-use-llseek-instead-of-f_pos=-for-directory-seeking.patch
-reduce-tlb-flushing-during-process-migration-3.patch
-fix-compile-errors-with-x86_powernow_k78=y-and-acpi_processor=m.patch
-mptbase-warning-fix.patch
-remove-dead-isdn-pcmcia-code.patch
-sparse-fix-warnings-in-net-sctp.patch
-kallsyms-ppc32-fix.patch
-noexec-kernel-parameters-update.patch
-cfq-bad-allocation.patch
-fat-update-document.patch
-use-null-instead-of-integer-0-in-security-selinux.patch
-int-return-to-unsigned-in-smb_proc_readdir_long-in.patch
-trivial-scripts_kernel-doc-ignoring-embedded-structs-shouldnt.patch
-trivial-scripts_kernel-doc-missing-bracket.patch
-trivial-little-arch_i386_kernel_timers_timer_nonec-fix.patch
-trivial-rcs___ignore-quilt-backup-files.patch
-trivial-remove-warning-in-ftape.patch
-trivial-arch_i386_kernel_scx200c-kill-duplicate.patch
-trivial-kill-off-config_pci_console.patch
-convert-uses-of-zone_highmem-to-is_highmem.patch
-smbfs-compilation-warning-in-267.patch
-remove-always-false-check-in-mm-slabc.patch
-correct-return-type-of-hashfn-in-fs-dquotc.patch
-fix-misplaced-inline-in-include-linux-iso_fsh.patch
-pagefault-readaround-fix.patch
-trivial-fix-to-include-scsi-scsi_deviceh.patch
-alpha-print-the-symbol-name-in-oops.patch
-port-acpi-sleep-workaround-to-new-dmi-probing.patch
-dmi-isnt-broken-anymore.patch
-fix-crc16-misnaming.patch
-crc16-kconfig-touchups.patch
-crc16-renaming-in-ax25-drivers.patch
-crc16-renaming-in-irda-drivers.patch
-crc16-renaming-in-isdn-drivers.patch
-crc16-renaming-in-ppp-driver.patch
-sh64-cpumask-cleanup.patch
-sh64-fix-init_taskc-build.patch
-sh64-add-asm-sh64-setuph.patch
-sh64-defconfig-update.patch
-add-missing-sysfs-support-to-cpia-webcam-video-driver.patch
-tmpfs-scheduling-while-atomic-fix.patch
-ad1889-warning-fix.patch
-writepage-fs-corruption-fixes.patch
-block_write_full_page-comment-fixes.patch
-deflate-remove-lazy-allocation.patch
Merged
+w9968cf-build-fix.patch
USB build fix
+ppc32-pmac_zilog-initialize-port-spinlock-on-all-init-paths.patch
pmac UART driver fix
+x86-64-support-for-singlestep-into-32-bit-system-calls.patch
x86_64 ptrace fix
+perfctr-documentation-update.patch
perfctr documentation
+kernelthread-idle-fix.patch
Fix idling of kernel threads
+i810_audio-fix-the-error-path-of-resource-management.patch
Audio driver fix
+add-a-few-might_sleep-checks-fix.patch
Add additional sleep-in-spinlock checks
+release_task-may-sleep.patch
Fix release_task() locking
+fix-airo-oops-on-removal.patch
Fix wireless driver oops after renaming the interface
+serious-performance-regression-due-to-nx-patch.patch
Fix the NX patch for ia64 (in progress)
+per_cpu-per_cpu-cpu_gdt_table.patch
+per_cpu-per_cpu-init_tss.patch
+per_cpu-per_cpu-cpu_tlbstate.patch
Convert some NR_CPUS arrays to per-cpu.
+gcc35-advansys.c.patch
+gcc35-alps_tdlb7.c.patch
+gcc35-always-inline.patch
+gcc35-arlan.h.patch
+gcc35-auerswald.c.patch
+gcc35-dabusb.c.patch
+gcc35-ds.c.patch
+gcc35-fixmap.h.patch
+gcc35-fore200e.c.patch
+gcc35-index.html.patch
+gcc35-ip6_fib.c.patch
+gcc35-iphase.h.patch
+gcc35-irttp.h.patch
+gcc35-mtrr.h.patch
+gcc35-netrom.h.patch
+gcc35-pppoe.c.patch
+gcc35-sonypi.patch
+gcc35-sp887x.c.patch
+gcc35-tda1004x.c.patch
+gcc35-transport.h.patch
+gcc35-ufs_fs.h.patch
+gcc35-usblp.c.patch
+gcc35-videodev.c.patch
+gcc35-wavefront_fx.c.patch
+gcc35-xfrm6_state.c.patch
gcc-3.5 fixes
+fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc.patch
+fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc-fix.patch
rivafb fix
+dev-zero-vs-hugetlb-mappings.patch
+hugetlbfs-vm_pgoff-bugs.patch
+hugetlbfs-private-mappings.patch
hugetlbpage fixes.
+net-kconfig-crc16-fix.patch
Net driver Kconfig fixes
+fix-oops-in-device_platform_unregister.patch
driver core oops fix
+preset-loops_per_jiffy-for-faster-booting.patch
Add the "lpj=" kernel boot option
+define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
+gcc-34-and-broken-inlining.patch
Fix up the compiler-specific inline decls
+handle-undefined-symbols.patch
Another attempt at handling symbols which end up undefined in vmlinux
+fix-3c59xc-uses-of-plain-integer-as-null-pointer.patch
sparse fixes
+small-style-fixups-for-the-new-automount-code.patch
cleanups
+split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
Split up some VFS pagecache functions for future XFS work.
+ifndef-guard-percpu_counterh-and-blockgroup_lockh.patch
Build fix
+floppyc-remove-superfluous-variable-initialization.patch
Cleanup
+unknown-symbol-in-drivers-scsi-pcmcia-fdomain_csko.patch
Kconfig fix
+radeonfb-cleanup-and-little-fixes.patch
fbdev driver fixes
+unknown-symbol-in-sound-oss-kahluako-needs-unknown-symbol-udelay.patch
Sound driver build fix
+remove-struct_cpy.patch
Kill struct_cpy()
+autoselect-fatfs.patch
Kconfig simplification for FATFS
+making-i-dhash_entries-cmdline-work-as-it-use-to.patch
permit huge VFS cache hashes.
+fix-double-reset-in-aic7xxx-driver.patch
aic7xxx fix
+fix-saa7146-compilation-on-268-rc1.patch
build fix
+fix-return-codes-after-i2c_add_driver-in-tea6415c.patch
i2c driver fix
+remove-outdated-stallion-contact-information.patch
Update comments and documentation.
+rivafb-i2c-fixes.patch
Fix rivafb i2c handling
+x86-64-singlestep-through-sigreturn-system-call.patch
x86_64 single-step fix
+jbd-recovery-latency-fix.patch
+truncate_inode_pages-latency-fix.patch
+journal_clean_checkpoint_list-latency-fix.patch
+kjournald-smp-latency-fix.patch
+unmap_vmas-smp-latency-fix.patch
+__cleanup_transaction-latency-fix.patch
+prune_dcache-latency-fix.patch
+filemap_sync-latency-fix.patch
+get_user_pages-latency-fix.patch
+slab-latency-fix.patch
Various scheduling latency fixes
+fix-ia64-early_printk-build-problem.patch
ia64 build fix
+fix-inode-state-corruption-268-rc1-bk1.patch
Fix lost inodes in VFS writeback.
All 252 patches:
linus.patch
kbuild-improve-kernel-build-with-separated-output.patch
kbuild: Improve Kernel build with separated output
sysfs-leaves-mount.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-dir.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-file.patch
sysfs backing store: sysfs_create() changes
sysfs-leaves-bin.patch
sysfs backing store: bin attribute changes
sysfs-leaves-symlink.patch
sysfs backing store: sysfs_create_link changes
sysfs-leaves-misc.patch
sysfs backing store: attribute groups and misc routines
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-dma-declare-coherent-memory.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-ieee1394.patch
bk-input.patch
bk-jfs.patch
bk-libata.patch
bk-mpc52xx.patch
bk-netdev.patch
bk-ntfs.patch
bk-pnp.patch
bk-scsi.patch
bk-usb.patch
mm.patch
add -mmN to EXTRAVERSION
w9968cf-build-fix.patch
w9968cf build fix
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
ia64 kgdb fix
kgdb-ia64-fixes.patch
kgdb: ia64 fixes
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag
radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
mustfix-lists.patch
mustfix lists
ppc32-pmac_zilog-initialize-port-spinlock-on-all-init-paths.patch
pmac_zilog: initialize port spinlock on all init paths
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
really-ptrace-single-step-2.patch
ptrace single-stepping fix
x86-64-support-for-singlestep-into-32-bit-system-calls.patch
x86-64 support for singlestep into 32-bit system calls
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt
disk-barrier ide warning fix
barrier-update.patch
barrier update
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
ext3-barrier-support.patch
ext3 barrier support
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
From: Jens Axboe <axboe@suse.de>
Subject: Re: ide errors in 7-rc1-mm1 and later
add-bh_eopnotsupp-for-testing.patch
add BH_Eopnotsupp for testing async barrier failures
handle-async-barrier-failures.patch
Handle async barrier failures
enable-suspend-resuming-of-e1000.patch
Enable suspend/resuming of e1000
tty_io-hangup-locking.patch
tty_io.c hangup locking
perfctr-core.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
CONFIG_PERFCTR=n build fix
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
perfctr-i386.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr x86_tests build fix
perfctr-x86_64.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr ppc32 update
perfctr update 4/6: PPC32 cleanups
perfctr-ppc32-buglet-fix.patch
perfctr ppc32 buglet fix
perfctr-virtualised-counters.patch
From: Mikael Pettersson <mikpe@csd.uu.se>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr update 6/6: misc minor cleanups
perfctr update 3/6: __user annotations
perfctr-cpus_complement-fix
perfctr cpumask cleanup
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr update 2/6: Kconfig-related updates
perfctr-update-5-6-reduce-stack-usage.patch
perfctr update 5/6: reduce stack usage
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-documentation-update.patch
perfctr documentation update
ext3-online-resize-patch.patch
ext3: online resizing
ext3-online-resize-warning-fix.patch
ext3-online-resize-warning-fix
altix-serial-driver-2.patch
Altix serial driver updates
altix-serial-driver-fix
sched-clean-init-idle.patch
sched: cleanup init_idle()
sched-clean-fork.patch
sched: cleanup, improve sched <=> fork APIs
sched-clean-fork-rename-wake_up_new_process-wake_up_new_task.patch
sched: rename wake_up_new_process -> wake_up_new_task
sched-misc-cleanups-2.patch
sched: misc cleanups #2
sched-unlikely-rt_task.patch
sched: make rt_task unlikely
sched-misc.patch
sched: sched misc changes
sched-misc-fix-rt.patch
sched: fix RT scheduling & interactivity estimator
sched-no-balance-clone.patch
sched: disable balance on clone
sched-remove-balance-clone.patch
sched: remove balance on clone
sched-fork-hotplug-cleanuppatch.patch
sched: fork hotplug hanling cleanup
kernelthread-idle-fix.patch
sched: kernel_thread idle fix
memory-backed-inodes-fix.patch
memory-backed inodes fix
ext3_bread-cleanup.patch
ext3_bread() cleanup
flexible-mmap-2.6.7-mm3-A8.patch
i386 virtual memory layout rework
flexible-mmap-bug-fix.patch
flexible-mmap BUG fix
flexible-mmap-updatepatch-267-mm5.patch
flexible-mmap update
driver-model-and-sysfs-support-for-pcmcia-1-3.patch
driver model and sysfs support for PCMCIA (1/3)
update-drivers-net-pcmcia-2-3.patch
update drivers/net/pcmcia (2/3)
update-drivers-net-wireless-3-3.patch
update drivers/net/wireless (3/3)
posix-locking-fix-to-posix_same_owner.patch
posix locking: Minimal fix to posix_same_owner()
posix-locking-fix-to-locking-code.patch
posix locking: more locking code fixes
posix-locking-fix-up-nfs4statec.patch
posix locking: Fix up nfs4state.c
posix-locking-fix-up-lockd.patch
posix locking: Fix up lockd to make use of the new interface
posix-locking-fl_owner_t-to-pid-mapping.patch
posix locking: mapping between fl_owner_t and client-side "pid"
ide_tf_pio_out_fixes.patch
ide: PIO-out fixes for ide-taskfile.c (CONFIG_IDE_TASKFILE_IO=n)
ide_tf_pio_out_prehandler.patch
ide: PIO-out ->prehandler() fixes (CONFIG_IDE_TASKFILE_IO=y)
ide_tf_pio_out_error.patch
ide: PIO-out error handling fixes (CONFIG_IDE_TASKFILE_IO=y)
ide_task_in_intr.patch
ide: remove BUSY check from task_in_intr() (CONFIG_IDE_TASKFILE_IO=n)
ide_pre_task_out_intr.patch
remove pre_task_out_intr() comment (CONFIG_IDE_TASKFILE_IO=n)
ide_pre_task_mulout_intr.patch
ide: pre_task_mulout_intr() cleanup (CONFIG_IDE_TASKFILE_IO=n)
ide_tf_no_partial.patch
ide: no partial completions for PIO (CONFIG_IDE_TASKFILE_IO=y)
ide_non_tf_pio.patch
ide: merge CONFIG_IDE_TASKFILE_IO=y|n PIO handlers together
ide_no_flagged_pio.patch
ide: use "normal" handlers for "flagged" taskfiles (ide-taskfile.c)
dvdrw-support-for-267-bk13.patch
DVD+RW support for 2.6.7-bk13
cdrw-packet-writing-support-for-267-bk13.patch
CDRW packet writing support
dvd-rw-packet-writing-update.patch
Packet writing support for DVD-RW and DVD+RW discs.
fix-race-in-pktcdvd-kernel-thread-handling.patch
Fix race in pktcdvd kernel thread handling
fix-open-close-races-in-pktcdvd.patch
Fix open/close races in pktcdvd
packet-writing-review-fixups.patch
packet writing: review fixups
remove-pkt_dev-from-struct-pktcdvd_device.patch
Remove pkt_dev from struct pktcdvd_device
packet-writing-docco.patch
packet writing documentation
convert-packet-writing-to-seq_file.patch
packet writing: convert to seq_file
r8169_napi-help-text-2.patch
R8169_NAPI help text
no-sysgood-for-ptrace-singlestep.patch
Don't use SYSGOOD for ptrace singlestep
err2-6-hashbin_remove_this-locking-fix.patch
err2-6: hashbin_remove_this() locking fix
dm-use-idr.patch
devicemapper: use an IDR tree for tracking minors
ipc-1-3-add-refcount-to-ipc_rcu_alloc.patch
ipc: Add refcount to ipc_rcu_alloc
ipc-2-3-remove-sem_revalidate.patch
ipc: remove sem_revalidate
ipc-3-3-enforce-semvmx-limit-for-undo.patch
ipc: enforce SEMVMX limit for undo
cleanup-of-ipc-msgc.patch
cleanup of ipc/msg.c
sk98lin-procfs-fix.patch
sk98lin procfs fix
cpufreq-driver-for-nforce2-kernel-267.patch
cpufreq driver for nForce2
allow-modular-ide-pnp.patch
allow modular ide-pnp
i2c-i2c-devci2c_dev_init-cleanup.patch
i2c/i2c-dev.c::i2c_dev_init() cleanup.
uml-base-patch.patch
uml: Uml base patch
uml-readds-just-for-now-ghashh-for-uml.patch
uml: Readds (just for now) ghash.h for UML
uml-avoid-that-gcc-breaks-uml-with-unit-at-a-time-compilation-mode.patch
uml: Avoid that gcc breaks UML with "unit at a time" compilation mode.
uml-fixes-an-host-fd-leak-caused-by-hostfs.patch
uml: Fixes an host fd leak caused by hostfs.
uml-adds-legacy_pty-config-option.patch
uml: Adds LEGACY_PTY config option
uml-makes-make-help-arch=um-work.patch
uml: Makes "make help ARCH=um" work.
uml-fixes-fixdepc-to-support-arch-um-include-uml-configh.patch
uml: Fixes "fixdep.c" to support arch/um/include/uml-config.h.
uml-kill-useless-warnings.patch
uml: Kill useless warnings
uml-avoids-compile-failure-when-host-misses-tkill.patch
uml: Avoids compile failure when host misses tkill().
uml-reduces-code-in-_user-files-by-moving-it-in-_kern-files-if-already-possible.patch
uml: Reduces code in *_user files, by moving it in _kern files if already possible.
uml-fixes-raw-and-uses-it-in-check_one_sigio-also-fixes-a-silly-panic-eintr-returned-by-call.patch
uml: Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call).
uml-folds-hostaudio_userc-into-hostaudio_kernc.patch
uml: Folds hostaudio_user.c into hostaudio_kern.c.
uml-use-ptrace_scemu-the-so-called-sysemu-to-reduce-syscall-cost.patch
uml: Use PTRACE_SCEMU (the so-called SYSEMU) to reduce syscall cost.
uml-adds-the-nosysemu-command-line-parameter-to-disable-sysemu.patch
uml: Adds the "nosysemu" command line parameter to disable SYSEMU
uml-adds-proc-sysemu-to-toggle-sysemu-usage.patch
uml: Adds /proc/sysemu to toggle SYSEMU usage.
uml-fix-for-sysemu-patches.patch
uml: Fix for sysemu patches
uml-handles-correctly-errno-==-eintr-in-lots-of-places.patch
uml: Handles correctly errno == EINTR in lots of places.
uml-adds-some-exports.patch
uml: Adds some exports
uml-avoids-a-panic-for-a-legal-situation.patch
uml: Avoids a panic for a legal situation
uml-removes-dead-code-in-trap_kernc.patch
uml: Removes dead code in trap_kern.c
uml-make-malloc-call-vmalloc-if-needed-needed-for-hostfs-on-26-host.patch
uml: Make malloc() call vmalloc if needed. Needed for hostfs on 2.6 host.
uml-little-kmalloc.patch
uml: little-kmalloc
uml-fix-os_process_pc-and-os_process_parent-for-corner-cases.patch
uml: Fix os_process_pc and os_process_parent for corner cases.
fix-warnings-in-net-irda.patch
sparse: fix warnings in net/irda/*
i810_audio-mmio-support.patch
i810_audio MMIO support
i810_audio-mmio-support-2.patch
i810_audio MMIO support #2
i810_audio-fix-the-error-path-of-resource-management.patch
i810_audio: Fix the error path of resource management
fix-warnings-drivers-net-sk98lin-skaddrc.patch
Fix warnings drivers/net/sk98lin/skaddr.c
fix-drivers-isdn-hisax-avm_pcic-build-warning-when.patch
Fix drivers/isdn/hisax/avm_pci.c build warning when !CONFIG_ISAPNP
idr-stale-comment.patch
idr.c: remove stale comment
bio_copy_user-cleanups.patch
bio_copy_user() cleanups
idr-comments-updates.patch
idr comments updates
detect-too-early-schedule-attempts.patch
detect too early schedule attempts
schedule-profiling.patch
schedule() profiling
From: Arjan van de Ven <arjanv@redhat.com>
Subject: Re: schedule profileing
add-a-few-might_sleep-checks.patch
Add a few might_sleep() checks
add-a-few-might_sleep-checks-fix.patch
add-a-few-might_sleep-checks fix
release_task-may-sleep.patch
permit sleeping in release_task()
ia64-ptrace-fix-fix.patch
Make get_user_pages() work again for ia64 gate area
possible-buglet-in-drivers-input-joystick-tmdcc.patch
Possible buglet in drivers/input/joystick/tmdc.c
crc16-renaming-in-via-velocity-ethernet-driver.patch
CRC16 renaming in VIA Velocity ethernet driver
fix-airo-oops-on-removal.patch
fix airo oops-on-removal
serious-performance-regression-due-to-nx-patch.patch
Fix serious performance regression due to NX patch
per_cpu-per_cpu-cpu_gdt_table.patch
percpu: cpu_gdt_table
per_cpu-per_cpu-init_tss.patch
percpu: init_tss
per_cpu-per_cpu-cpu_tlbstate.patch
percpu: cpu_tlbstate
gcc35-advansys.c.patch
gcc-3.5 fixes
gcc35-alps_tdlb7.c.patch
gcc-3.5 fixes
gcc35-always-inline.patch
gcc-3.5 fixes
gcc35-arlan.h.patch
gcc-3.5 fixes
gcc35-auerswald.c.patch
gcc-3.5 fixes
gcc35-dabusb.c.patch
gcc-3.5 fixes
gcc35-ds.c.patch
gcc-3.5 fixes
gcc35-fixmap.h.patch
gcc-3.5 fixes
gcc35-fore200e.c.patch
gcc-3.5 fixes
gcc35-index.html.patch
gcc-3.5 fixes
gcc35-ip6_fib.c.patch
gcc-3.5 fixes
gcc35-iphase.h.patch
gcc-3.5 fixes
gcc35-irttp.h.patch
gcc-3.5 fixes
gcc35-mtrr.h.patch
gcc-3.5 fixes
gcc35-netrom.h.patch
gcc-3.5 fixes
gcc35-pppoe.c.patch
gcc-3.5 fixes
gcc35-sonypi.patch
gcc-3.5 fixes
gcc35-sp887x.c.patch
gcc-3.5 fixes
gcc35-tda1004x.c.patch
gcc-3.5 fixes
gcc35-transport.h.patch
gcc-3.5 fixes
gcc35-ufs_fs.h.patch
gcc-3.5 fixes
gcc35-usblp.c.patch
gcc-3.5 fixes
gcc35-videodev.c.patch
gcc-3.5 fixes
gcc35-wavefront_fx.c.patch
gcc-3.5 fixes
gcc35-xfrm6_state.c.patch
gcc-3.5 fixes
fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc.patch
Fix rivafb's NV_ARCH_, cleanup DEBUG, backlight control on ppc
fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc-fix.patch
fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc fix
dev-zero-vs-hugetlb-mappings.patch
/dev/zero vs hugetlb mappings.
hugetlbfs-vm_pgoff-bugs.patch
hugetlbfs vm_pgoff bugs
hugetlbfs-private-mappings.patch
hugetlbfs private mappings
net-kconfig-crc16-fix.patch
net/Kconfig crc16 warning fix
fix-oops-in-device_platform_unregister.patch
Fix OOPS in device_platform_unregister
preset-loops_per_jiffy-for-faster-booting.patch
preset loops_per_jiffy for faster booting
define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
#define inline as __attribute__((always_inline)) also for gcc >= 3.4
gcc-34-and-broken-inlining.patch
clean up __always_inline__ usage
handle-undefined-symbols.patch
Fail if vmlinux contains undefined symbols
fix-3c59xc-uses-of-plain-integer-as-null-pointer.patch
Fix 3c59x.c uses of plain integer as NULL pointer
small-style-fixups-for-the-new-automount-code.patch
small style fixups for the new automount code
split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
split generic_file_aio_write into buffered and direct I/O parts
ifndef-guard-percpu_counterh-and-blockgroup_lockh.patch
#ifndef guard percpu_counter.h and blockgroup_lock.h
floppyc-remove-superfluous-variable-initialization.patch
floppy.c: remove superfluous variable initialization
unknown-symbol-in-drivers-scsi-pcmcia-fdomain_csko.patch
fdomain_cs needs ISA
radeonfb-cleanup-and-little-fixes.patch
radeonfb: cleanup and little fixes
unknown-symbol-in-sound-oss-kahluako-needs-unknown-symbol-udelay.patch
`unknown symbol' in sound/oss/kahlua.ko needs unknown symbol udelay
remove-struct_cpy.patch
remove struct_cpy()
autoselect-fatfs.patch
autoselect FAT_FS in config
making-i-dhash_entries-cmdline-work-as-it-use-to.patch
Make i/dhash_entries cmdline work as it use to.
fix-double-reset-in-aic7xxx-driver.patch
Fix double reset in aic7xxx driver
fix-saa7146-compilation-on-268-rc1.patch
fix saa7146 compilation
fix-return-codes-after-i2c_add_driver-in-tea6415c.patch
fix return codes after i2c_add_driver() in tea6415c and tea6420
remove-outdated-stallion-contact-information.patch
remove outdated Stallion contact information
rivafb-i2c-fixes.patch
Rivafb I2C fixes
x86-64-singlestep-through-sigreturn-system-call.patch
x86-64 singlestep through sigreturn system call
jbd-recovery-latency-fix.patch
jbd recovery latency fix
truncate_inode_pages-latency-fix.patch
truncate_inode_pages-latency-fix
journal_clean_checkpoint_list-latency-fix.patch
journal_clean_checkpoint_list latency fix
kjournald-smp-latency-fix.patch
kjournald-smp-latency-fix
unmap_vmas-smp-latency-fix.patch
unmap_vmas-smp-latency-fix
__cleanup_transaction-latency-fix.patch
__cleanup_transaction-latency-fix
prune_dcache-latency-fix.patch
prune_dcache-latency-fix
filemap_sync-latency-fix.patch
filemap_sync-latency-fix
slab-latency-fix.patch
slab-latency-fix
fix-ia64-early_printk-build-problem.patch
fix ia64 early_printk build problem
fix-inode-state-corruption-268-rc1-bk1.patch
fix inode state incoherency
get_user_pages-latency-fix.patch
get_user_pages-latency-fix
^ permalink raw reply [flat|nested] 19+ messages in thread* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton @ 2004-07-14 7:29 ` Andrew Morton 2004-07-14 8:11 ` 2.6.8-rc1-mm1 David Howells 2004-07-14 16:36 ` 2.6.8-rc1-mm1 John Cherry ` (8 subsequent siblings) 9 siblings, 1 reply; 19+ messages in thread From: Andrew Morton @ 2004-07-14 7:29 UTC (permalink / raw) To: linux-kernel; +Cc: Jose R. Santos, David Howells Andrew Morton <akpm@osdl.org> wrote: > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/ > This kernel runs like a dessicated slug if you have more than 2G of memory due to a 32-bit overflow. Dentry cache hash table entries: 1 (order: -10, 4 bytes) Inode-cache hash table entries: 1 (order: -10, 4 bytes) The dcache is a singly-linked list. Here's a (lame) fix: --- 25/mm/page_alloc.c~making-i-dhash_entries-cmdline-work-as-it-use-to-fix 2004-07-14 00:11:26.437028752 -0700 +++ 25-akpm/mm/page_alloc.c 2004-07-14 00:24:56.461886256 -0700 @@ -2004,7 +2004,8 @@ void *__init alloc_large_system_hash(con unsigned int *_hash_shift, unsigned int *_hash_mask) { - unsigned long max, log2qty, size; + unsigned long long max; + unsigned long log2qty, size; void *table; /* allow the kernel cmdline to have a say */ @@ -2025,18 +2026,19 @@ void *__init alloc_large_system_hash(con numentries = 1UL << (long_log2(numentries) + 1); /* limit allocation size to 1/16 total memory */ - max = ((nr_all_pages << PAGE_SHIFT)/16) / bucketsize; + max = ((unsigned long long)nr_all_pages << PAGE_SHIFT) >> 4; + do_div(max, bucketsize); if (numentries > max) numentries = max; log2qty = long_log2(numentries); + size = bucketsize << log2qty; do { - size = bucketsize << log2qty; - - table = (void *) alloc_bootmem(size); - + table = alloc_bootmem(size); + if (!table) + size /= 2; } while (!table && size > PAGE_SIZE); if (!table) _ btw, David, I'm wondering about this loop: do { size = bucketsize << log2qty; table = (void *) alloc_bootmem(size); } while (!table && size > PAGE_SIZE); Is this a busy-wait-until-someone-plugs-in-more-ram-chips thing? ;) I assume you meant something like the above? btw, that (void *) cast was superfluous... ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 7:29 ` 2.6.8-rc1-mm1 Andrew Morton @ 2004-07-14 8:11 ` David Howells 0 siblings, 0 replies; 19+ messages in thread From: David Howells @ 2004-07-14 8:11 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel, Jose R. Santos > btw, David, I'm wondering about this loop: > > do { > size = bucketsize << log2qty; > > table = (void *) alloc_bootmem(size); > > } while (!table && size > PAGE_SIZE); > > Is this a busy-wait-until-someone-plugs-in-more-ram-chips thing? ;) Well, with IBM hardware, you never know:-) Yeah... that got fixed here in my 2.4 version, and I failed to transfer the fix across. log2qty should be decremented every time around the loop: - } while (!table && size > PAGE_SIZE); + } while (!table && size > PAGE_SIZE && --log2qty); David ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton 2004-07-14 7:29 ` 2.6.8-rc1-mm1 Andrew Morton @ 2004-07-14 16:36 ` John Cherry 2004-07-14 18:49 ` [patch] 2.6.8-rc1-mm1: USB w9968cf compile error Adrian Bunk ` (7 subsequent siblings) 9 siblings, 0 replies; 19+ messages in thread From: John Cherry @ 2004-07-14 16:36 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel@vger.kernel.org The errors in the allyesconfig build stem from the following error... sound/pci/au88x0/snd-au8830.o(.rodata+0x45c): In function `vortex_wt_SetReg': sound/pci/au88x0/au88x0_synth.c:237: multiple definition of `vortex_asXtalkGainsAllChan' sound/pci/au88x0/snd-au8810.o(.rodata+0x43c):sound/pci/au88x0/au88x0_core.c:344: first defined here make[3]: [sound/pci/au88x0/built-in.o] Error 1 (ignored) Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2) Kernel bzImage bzImage bzImage modules bzImage modules (defconfig) (allno) (allyes) (allyes) (allmod) (allmod) --------------- ---------- -------- -------- -------- -------- -------- 2.6.8-rc1-mm1 0w/0e 0w/0e 88w/9e 5w/0e 1w/0e 87w/0e 2.6.7-mm7 0w/0e 0w/0e 89w/9e 5w/0e 1w/0e 84w/0e 2.6.7-mm6 0w/0e 0w/0e 85w/9e 5w/0e 1w/0e 80w/0e 2.6.7-mm5 0w/0e 0w/0e 92w/0e 5w/0e 1w/0e 87w/0e 2.6.7-mm4 0w/0e 0w/0e 94w/0e 5w/0e 1w/0e 89w/0e 2.6.7-mm3 0w/0e 0w/0e 90w/6e 5w/0e 1w/0e 86w/0e 2.6.7-mm2 0w/0e 0w/0e 109w/0e 7w/0e 1w/0e 106w/0e 2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e 2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e 2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e 2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e 2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e 2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e 2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e 2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e 2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e 2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e 2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e 2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e 2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e 2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e 2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e 2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e 2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e 2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e 2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e 2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e 2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e 2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e 2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e 2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e 2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e 2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e 2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e 2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e 2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e 2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e 2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e 2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e 2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e 2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e 2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e 2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e 2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e 2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e 2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e 2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e 2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e 2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e 2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e 2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e 2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e 2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e 2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e 2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e 2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e 2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e 2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e 2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e 2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e 2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e 2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e 2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e 2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e 2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e 2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e 2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e 2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e 2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e Web page with links to complete details: http://developer.osdl.org/cherry/compile/ John ^ permalink raw reply [flat|nested] 19+ messages in thread
* [patch] 2.6.8-rc1-mm1: USB w9968cf compile error 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton 2004-07-14 7:29 ` 2.6.8-rc1-mm1 Andrew Morton 2004-07-14 16:36 ` 2.6.8-rc1-mm1 John Cherry @ 2004-07-14 18:49 ` Adrian Bunk 2004-07-14 19:03 ` Greg KH 2004-07-14 19:08 ` Adrian Bunk 2004-07-14 20:29 ` 2.6.8-rc1-mm1 Dominik Karall ` (6 subsequent siblings) 9 siblings, 2 replies; 19+ messages in thread From: Adrian Bunk @ 2004-07-14 18:49 UTC (permalink / raw) To: Andrew Morton, Luca Risolia; +Cc: linux-kernel, greg, linux-usb-devel On Tue, Jul 13, 2004 at 06:25:59PM -0700, Andrew Morton wrote: >... > All 252 patches: >... > bk-usb.patch >... This patch marks w9968cf_valid_depth as inline, although it's used before it's defined. gcc 3.4 therefore correctly fails with: <-- snip --> ... CC drivers/usb/media/w9968cf.o drivers/usb/media/w9968cf.c: In function `w9968cf_set_picture': drivers/usb/media/w9968cf.c:487: sorry, unimplemented: inlining failed in call to 'w9968cf_valid_depth': function body not available drivers/usb/media/w9968cf.c:1722: sorry, unimplemented: called from here make[3]: *** [drivers/usb/media/w9968cf.o] Error 1 <-- snip --> This patch moves w9968cf_valid_depth above it's first user (it also uses two other functions to keep the ordering of functions a bit more consistent). diffstat output: drivers/usb/media/w9968cf.c | 92 ++++++++++++++++++------------------ 1 files changed, 46 insertions(+), 46 deletions(-) Signed-off-by: Adrian Bunk <bunk@fs.tum.de> --- linux-2.6.8-rc1-mm1-full-3.4/drivers/usb/media/w9968cf.c.old 2004-07-14 20:31:39.000000000 +0200 +++ linux-2.6.8-rc1-mm1-full-3.4/drivers/usb/media/w9968cf.c 2004-07-14 20:42:52.000000000 +0200 @@ -481,11 +481,11 @@ static void w9968cf_adjust_configuration(struct w9968cf_device*); static int w9968cf_turn_on_led(struct w9968cf_device*); static int w9968cf_init_chip(struct w9968cf_device*); -static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); -static int w9968cf_set_window(struct w9968cf_device*, struct video_window); static inline u16 w9968cf_valid_palette(u16 palette); static inline u16 w9968cf_valid_depth(u16 palette); static inline u8 w9968cf_need_decompression(u16 palette); +static int w9968cf_set_picture(struct w9968cf_device*, struct video_picture); +static int w9968cf_set_window(struct w9968cf_device*, struct video_window); static int w9968cf_postprocess_frame(struct w9968cf_device*, struct w9968cf_frame_t*); static int w9968cf_adjust_window_size(struct w9968cf_device*, u16* w, u16* h); @@ -1709,6 +1709,50 @@ /*-------------------------------------------------------------------------- + Return non-zero if the palette is supported, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_palette(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return palette; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- + Return the depth corresponding to the given palette. + Palette _must_ be supported ! + --------------------------------------------------------------------------*/ +static inline u16 w9968cf_valid_depth(u16 palette) +{ + u8 i=0; + while (w9968cf_formatlist[i].palette != palette) + i++; + + return w9968cf_formatlist[i].depth; +} + + +/*-------------------------------------------------------------------------- + Return non-zero if the format requires decompression, 0 otherwise. + --------------------------------------------------------------------------*/ +static inline u8 w9968cf_need_decompression(u16 palette) +{ + u8 i = 0; + while (w9968cf_formatlist[i].palette != 0) { + if (palette == w9968cf_formatlist[i].palette) + return w9968cf_formatlist[i].compression; + i++; + } + return 0; +} + + +/*-------------------------------------------------------------------------- Change the picture settings of the camera. Return 0 on success, a negative number otherwise. --------------------------------------------------------------------------*/ @@ -1966,50 +2010,6 @@ } -/*-------------------------------------------------------------------------- - Return non-zero if the palette is supported, 0 otherwise. - --------------------------------------------------------------------------*/ -static inline u16 w9968cf_valid_palette(u16 palette) -{ - u8 i = 0; - while (w9968cf_formatlist[i].palette != 0) { - if (palette == w9968cf_formatlist[i].palette) - return palette; - i++; - } - return 0; -} - - -/*-------------------------------------------------------------------------- - Return the depth corresponding to the given palette. - Palette _must_ be supported ! - --------------------------------------------------------------------------*/ -static inline u16 w9968cf_valid_depth(u16 palette) -{ - u8 i=0; - while (w9968cf_formatlist[i].palette != palette) - i++; - - return w9968cf_formatlist[i].depth; -} - - -/*-------------------------------------------------------------------------- - Return non-zero if the format requires decompression, 0 otherwise. - --------------------------------------------------------------------------*/ -static inline u8 w9968cf_need_decompression(u16 palette) -{ - u8 i = 0; - while (w9968cf_formatlist[i].palette != 0) { - if (palette == w9968cf_formatlist[i].palette) - return w9968cf_formatlist[i].compression; - i++; - } - return 0; -} - - /*-------------------------------------------------------------------------- Adjust the asked values for window width and height. Return 0 on success, -1 otherwise. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [patch] 2.6.8-rc1-mm1: USB w9968cf compile error 2004-07-14 18:49 ` [patch] 2.6.8-rc1-mm1: USB w9968cf compile error Adrian Bunk @ 2004-07-14 19:03 ` Greg KH 2004-07-14 19:08 ` Adrian Bunk 1 sibling, 0 replies; 19+ messages in thread From: Greg KH @ 2004-07-14 19:03 UTC (permalink / raw) To: Adrian Bunk; +Cc: Andrew Morton, Luca Risolia, linux-kernel, linux-usb-devel On Wed, Jul 14, 2004 at 08:49:53PM +0200, Adrian Bunk wrote: > On Tue, Jul 13, 2004 at 06:25:59PM -0700, Andrew Morton wrote: > >... > > All 252 patches: > >... > > bk-usb.patch > >... > > This patch marks w9968cf_valid_depth as inline, although it's used > before it's defined. Looks good, applied, thanks. greg k-h ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [patch] 2.6.8-rc1-mm1: USB w9968cf compile error 2004-07-14 18:49 ` [patch] 2.6.8-rc1-mm1: USB w9968cf compile error Adrian Bunk 2004-07-14 19:03 ` Greg KH @ 2004-07-14 19:08 ` Adrian Bunk 1 sibling, 0 replies; 19+ messages in thread From: Adrian Bunk @ 2004-07-14 19:08 UTC (permalink / raw) To: Andrew Morton, Luca Risolia; +Cc: linux-kernel, greg, linux-usb-devel On Wed, Jul 14, 2004 at 08:49:53PM +0200, Adrian Bunk wrote: >... > This patch moves w9968cf_valid_depth above it's first user (it also uses s/uses/moves/ > two other functions to keep the ordering of functions a bit more > consistent). >... cu Adrian -- "Is there not promise of rain?" Ling Tan asked suddenly out of the darkness. There had been need of rain for many days. "Only a promise," Lao Er said. Pearl S. Buck - Dragon Seed ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (2 preceding siblings ...) 2004-07-14 18:49 ` [patch] 2.6.8-rc1-mm1: USB w9968cf compile error Adrian Bunk @ 2004-07-14 20:29 ` Dominik Karall 2004-07-14 20:43 ` [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread Adrian Bunk 2004-07-14 21:08 ` 2.6.8-rc1-mm1 Dominik Karall ` (5 subsequent siblings) 9 siblings, 1 reply; 19+ messages in thread From: Dominik Karall @ 2004-07-14 20:29 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel On Wednesday 14 July 2004 03:25, Andrew Morton wrote: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6 >.8-rc1-mm1/ CC [M] drivers/net/8139too.o drivers/net/8139too.c: In function `rtl8139_open': drivers/net/8139too.c:616: nicht implementiert: >>inline<< beim Aufruf von >>rtl8139_start_thread<< gescheitert: function body not available drivers/net/8139too.c:1362: nicht implementiert: von hier aufgerufen make[3]: *** [drivers/net/8139too.o] Fehler 1 make[2]: *** [drivers/net] Fehler 2 make[1]: *** [drivers] Fehler 2 make[1]: Verlasse Verzeichnis »/usr/src/linux-2.6.6« make: *** [stamp-build] Fehler 2 gcc 3.4 greets dominik ^ permalink raw reply [flat|nested] 19+ messages in thread
* [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread 2004-07-14 20:29 ` 2.6.8-rc1-mm1 Dominik Karall @ 2004-07-14 20:43 ` Adrian Bunk 2004-07-14 20:45 ` Jeff Garzik 2004-07-27 18:00 ` Jeff Garzik 0 siblings, 2 replies; 19+ messages in thread From: Adrian Bunk @ 2004-07-14 20:43 UTC (permalink / raw) To: Dominik Karall, Jeff Garzik; +Cc: Andrew Morton, linux-kernel, linux-net On Wed, Jul 14, 2004 at 10:29:18PM +0200, Dominik Karall wrote: > On Wednesday 14 July 2004 03:25, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6 > >.8-rc1-mm1/ > > CC [M] drivers/net/8139too.o > drivers/net/8139too.c: In function `rtl8139_open': > drivers/net/8139too.c:616: nicht implementiert: >>inline<< beim Aufruf von > >>rtl8139_start_thread<< gescheitert: function body not available > drivers/net/8139too.c:1362: nicht implementiert: von hier aufgerufen > make[3]: *** [drivers/net/8139too.o] Fehler 1 > make[2]: *** [drivers/net] Fehler 2 > make[1]: *** [drivers] Fehler 2 > make[1]: Verlasse Verzeichnis »/usr/src/linux-2.6.6« > make: *** [stamp-build] Fehler 2 > > gcc 3.4 I should be fast at going through my gcc 3.4 TODO list... Fix below. > greets > dominik cu Adrian <-- snip --> uninline rtl8139_start_thread in drivers/net/8139too.c . Signed-off-by: Adrian Bunk <bunk@fs.tum.de> --- linux-2.6.7-mm6-full-gcc3.4/drivers/net/8139too.c.old 2004-07-09 00:49:24.000000000 +0200 +++ linux-2.6.7-mm6-full-gcc3.4/drivers/net/8139too.c 2004-07-09 00:52:55.000000000 +0200 @@ -613,7 +613,7 @@ static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, int val); -static inline void rtl8139_start_thread(struct net_device *dev); +static void rtl8139_start_thread(struct net_device *dev); static void rtl8139_tx_timeout (struct net_device *dev); static void rtl8139_init_ring (struct net_device *dev); static int rtl8139_start_xmit (struct sk_buff *skb, @@ -1643,7 +1643,7 @@ complete_and_exit (&tp->thr_exited, 0); } -static inline void rtl8139_start_thread(struct net_device *dev) +static void rtl8139_start_thread(struct net_device *dev) { struct rtl8139_private *tp = dev->priv; ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread 2004-07-14 20:43 ` [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread Adrian Bunk @ 2004-07-14 20:45 ` Jeff Garzik 2004-07-27 18:00 ` Jeff Garzik 1 sibling, 0 replies; 19+ messages in thread From: Jeff Garzik @ 2004-07-14 20:45 UTC (permalink / raw) To: Adrian Bunk; +Cc: Dominik Karall, Andrew Morton, linux-kernel, linux-net Patch looks OK, will apply soon-ish... ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread 2004-07-14 20:43 ` [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread Adrian Bunk 2004-07-14 20:45 ` Jeff Garzik @ 2004-07-27 18:00 ` Jeff Garzik 1 sibling, 0 replies; 19+ messages in thread From: Jeff Garzik @ 2004-07-27 18:00 UTC (permalink / raw) To: Adrian Bunk; +Cc: Dominik Karall, Andrew Morton, linux-kernel, linux-net applied ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (3 preceding siblings ...) 2004-07-14 20:29 ` 2.6.8-rc1-mm1 Dominik Karall @ 2004-07-14 21:08 ` Dominik Karall 2004-07-14 21:53 ` 2.6.8-rc1-mm1 Tim Bird ` (4 subsequent siblings) 9 siblings, 0 replies; 19+ messages in thread From: Dominik Karall @ 2004-07-14 21:08 UTC (permalink / raw) To: Andrew Morton, Adrian Bunk, Jeff Garzik; +Cc: linux-kernel On Wednesday 14 July 2004 03:25, Andrew Morton wrote: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6 >.8-rc1-mm1/ next one: CC [M] drivers/scsi/sg.o drivers/scsi/sg.c: In function `sg_ioctl': drivers/scsi/sg.c:209: nicht implementiert: >>inline<< beim Aufruf von >>sg_jif_to_ms<< gescheitert: function body not available drivers/scsi/sg.c:930: nicht implementiert: von hier aufgerufen make[3]: *** [drivers/scsi/sg.o] Fehler 1 make[2]: *** [drivers/scsi] Fehler 2 make[1]: *** [drivers] Fehler 2 greets dominik ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (4 preceding siblings ...) 2004-07-14 21:08 ` 2.6.8-rc1-mm1 Dominik Karall @ 2004-07-14 21:53 ` Tim Bird 2004-07-15 10:35 ` 2.6.8-rc1-mm1 Ralf Hildebrandt ` (3 subsequent siblings) 9 siblings, 0 replies; 19+ messages in thread From: Tim Bird @ 2004-07-14 21:53 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel Andrew Morton wrote: > +preset-loops_per_jiffy-for-faster-booting.patch > > Add the "lpj=" kernel boot option I tested this... With HZ=1000: - normal boot: calibrate_delay() took 23 milliseconds - specifying lpj=xxx: calibrate_delay() took 43 microseconds. With HZ=100: - normal boot: calibrate_delay() took 264 milliseconds - specifying lpj=xxx: calibrate_delay() took 43 microseconds. No adverse behaviour was observed. This will be a big improvement for embedded folks. Thanks, -- Tim ============================= Tim Bird Architecture Group Co-Chair, CE Linux Forum Senior Staff Engineer, Sony Electronics E-mail: tim.bird@am.sony.com ============================= ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (5 preceding siblings ...) 2004-07-14 21:53 ` 2.6.8-rc1-mm1 Tim Bird @ 2004-07-15 10:35 ` Ralf Hildebrandt 2004-07-18 3:53 ` [patch] 2.6.8-rc1-mm1: work around broken USB DocBook generation Adrian Bunk ` (2 subsequent siblings) 9 siblings, 0 replies; 19+ messages in thread From: Ralf Hildebrandt @ 2004-07-15 10:35 UTC (permalink / raw) To: linux-kernel * Andrew Morton <akpm@osdl.org>: > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/ > > - Lots of little fixes, mainly > > - Numerous scheduling latency fixes, mainly in the ext3 area. > > This is a first pass - these patches need redoing and a bit of > infrastructure consolidation. > > - Outta here: I won't be in a position to handle patches until July 26. Off > to http://www.tech-forum.org/upcoming/open_source_software_06-10-04.htm and > then Kernel Summit and then OLS. With gcc-3.4 I get: make[1]: Entering directory /usr/src/linux-2.6.8-rc1-mm1' make[2]: arch/i386/kernel/asm-offsets.s' is up to date. CHK include/linux/compile.h CC drivers/net/8139too.o drivers/net/8139too.c: In function rtl8139_open': drivers/net/8139too.c:616: sorry, unimplemented: inlining failed in call to 'rtl8139_start_thread': function body not available drivers/net/8139too.c:1362: sorry, unimplemented: called from here make[3]: *** [drivers/net/8139too.o] Error 1 make[2]: *** [drivers/net] Error 2 make[1]: *** [drivers] Error 2 make[1]: Leaving directory /usr/src/linux-2.6.8-rc1-mm1' make: *** [stamp-build] Error 2 -- Ralf Hildebrandt (Im Auftrag des Referat V a) Ralf.Hildebrandt@charite.de Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-916 IT-Zentrum Standort Campus Mitte AIM. ralfpostfix ^ permalink raw reply [flat|nested] 19+ messages in thread
* [patch] 2.6.8-rc1-mm1: work around broken USB DocBook generation 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (6 preceding siblings ...) 2004-07-15 10:35 ` 2.6.8-rc1-mm1 Ralf Hildebrandt @ 2004-07-18 3:53 ` Adrian Bunk 2004-07-20 0:02 ` 2.6.8-rc1-mm1 J.A. Magallon 2004-07-20 0:05 ` 2.6.8-rc1-mm1 J.A. Magallon 9 siblings, 0 replies; 19+ messages in thread From: Adrian Bunk @ 2004-07-18 3:53 UTC (permalink / raw) To: Andrew Morton, greg; +Cc: linux-kernel, linux-usb-devel On Tue, Jul 13, 2004 at 06:25:59PM -0700, Andrew Morton wrote: >... > All 252 patches: >... > bk-usb.patch >... This causes the following error during "make psdocs": <-- snip --> ... DB2PS Documentation/DocBook/usb.ps Using catalogs: /etc/sgml/catalog Using stylesheet: /usr/share/docbook-utils/docbook-utils.dsl#print Working on: /home/bunk/linux/kernel-2.6/linux-2.6.8-rc1-mm1-full/Documentation/DocBook/usb.sgml jade:/home/bunk/linux/kernel-2.6/linux-2.6.8-rc1-mm1-full/Documentation/DocBook/usb.sgml:549:16:E: end tag for "VARIABLELIST" which is not finished make[1]: *** [Documentation/DocBook/usb.ps] Error 8 <-- snip --> The patch below works around this issue by not letting it look like a valid kerneldoc. Signed-off-by: Adrian Bunk <bunk@fs.tum.de> --- linux-2.6.8-rc1-mm1-full/include/linux/usb.h.old 2004-07-18 05:47:38.000000000 +0200 +++ linux-2.6.8-rc1-mm1-full/include/linux/usb.h 2004-07-18 05:47:51.000000000 +0200 @@ -289,7 +289,7 @@ struct usb_tt; -/** +/* * struct usb_device - kernel's representation of a USB device * * FIXME: Write the kerneldoc! ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (7 preceding siblings ...) 2004-07-18 3:53 ` [patch] 2.6.8-rc1-mm1: work around broken USB DocBook generation Adrian Bunk @ 2004-07-20 0:02 ` J.A. Magallon 2004-07-22 12:56 ` 2.6.8-rc1-mm1 Jens Axboe 2004-07-20 0:05 ` 2.6.8-rc1-mm1 J.A. Magallon 9 siblings, 1 reply; 19+ messages in thread From: J.A. Magallon @ 2004-07-20 0:02 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 6156 bytes --] On 2004.07.14, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/ > It oopses if you try to write on a CDRW without media loaded. Who would do such a stupid thing ? Me the impatient trying to write before the drive ends to load the disc... The bad thing is that it leaves the drive in an ususable state: Error trying to open /dev/hdc exclusively (Device or resource busy)... retrying in 1 second. Error trying to open /dev/hdc exclusively (Device or resource busy)... retrying in 1 second. It does not happen with 2.6.8-rc2. I am not using a pure rc1-mm1, but applied all the patches neded to build with gcc-3.4.1: - fix for usb-locking - sg.c changes to use standard jiffies - inline corrections from Adrian Bunk for e1000, smp, sunrpc, eth1394. Yup, nvidia loaded, but does it really matter ? Opps follows: Jul 20 01:52:35 werewolf kernel: ------------[ cut here ]------------ Jul 20 01:52:35 werewolf kernel: kernel BUG at mm/page_alloc.c:796! Jul 20 01:52:35 werewolf kernel: invalid operand: 0000 [#1] Jul 20 01:52:35 werewolf kernel: PREEMPT SMP Jul 20 01:52:35 werewolf kernel: Modules linked in: microcode snd_pcm_oss snd_mixer_oss tuner msp3400 bttv video_buf i2c_algo_bit v4l2_common btcx _risc videodev nvidia snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd soundcore w83627hf i2c_sensor i 2c_isa i2c_i801 i2c_core ipt_MASQUERADE iptable_nat ipt_state ip_conntrack iptable_filter ip_tables e1000 ide_floppy ide_cd 3c59x intel_agp agpgar t joydev evdev usb_storage usblp usbhid uhci_hcd ehci_hcd usbcore Jul 20 01:52:35 werewolf kernel: CPU: 0 Jul 20 01:52:35 werewolf kernel: EIP: 0060:[__free_pages+48/58] Tainted: P VLI Jul 20 01:52:35 werewolf kernel: EIP: 0060:[<c013c916>] Tainted: P VLI Jul 20 01:52:35 werewolf kernel: EFLAGS: 00210246 (2.6.8-rc1-mm1) Jul 20 01:52:35 werewolf kernel: EIP is at __free_pages+0x30/0x3a Jul 20 01:52:35 werewolf kernel: eax: ffffffff ebx: f7667f60 ecx: c15f6c40 edx: 00000000 Jul 20 01:52:35 werewolf kernel: esi: f1dff740 edi: f7448a40 ebp: 00000001 esp: f2351d6c Jul 20 01:52:35 werewolf kernel: ds: 007b es: 007b ss: 0068 Jul 20 01:52:35 werewolf kernel: Process cdrecord (pid: 4889, threadinfo=f2351000 task=f23d7970) Jul 20 01:52:35 werewolf kernel: Stack: c015c930 fffffff2 f740b9cc 00000000 f2351e1c f740b9cc c0228603 f2351ea8 Jul 20 01:52:35 werewolf kernel: 00029b05 c022bd3c 00000040 00000001 00000000 f7448a40 f7e4bd80 f7dcf94c Jul 20 01:52:35 werewolf kernel: 0005005a 00000000 c0130040 0002eb5f 00000000 00000000 00000000 00000000 Jul 20 01:52:35 werewolf kernel: Call Trace: Jul 20 01:52:35 werewolf kernel: [bio_uncopy_user+94/125] bio_uncopy_user+0x5e/0x7d Jul 20 01:52:35 werewolf kernel: [<c015c930>] bio_uncopy_user+0x5e/0x7d Jul 20 01:52:35 werewolf kernel: [blk_rq_unmap_user+31/80] blk_rq_unmap_user+0x1f/0x50 Jul 20 01:52:35 werewolf kernel: [<c0228603>] blk_rq_unmap_user+0x1f/0x50 Jul 20 01:52:35 werewolf kernel: [sg_io+550/633] sg_io+0x226/0x279 Jul 20 01:52:35 werewolf kernel: [<c022bd3c>] sg_io+0x226/0x279 Jul 20 01:52:35 werewolf kernel: [sys_timer_settime+602/637] sys_timer_settime+0x25a/0x27d Jul 20 01:52:35 werewolf kernel: [<c0130040>] sys_timer_settime+0x25a/0x27d Jul 20 01:52:35 werewolf kernel: [scsi_cmd_ioctl+737/993] scsi_cmd_ioctl+0x2e1/0x3e1 Jul 20 01:52:35 werewolf kernel: [<c022c2f8>] scsi_cmd_ioctl+0x2e1/0x3e1 Jul 20 01:52:35 werewolf kernel: [pty_write+297/321] pty_write+0x129/0x141 Jul 20 01:52:35 werewolf kernel: [<c020d483>] pty_write+0x129/0x141 Jul 20 01:52:35 werewolf kernel: [opost_block+264/358] opost_block+0x108/0x166 Jul 20 01:52:35 werewolf kernel: [<c0209f01>] opost_block+0x108/0x166 Jul 20 01:52:35 werewolf kernel: [pty_write+297/321] pty_write+0x129/0x141 Jul 20 01:52:35 werewolf kernel: [<c020d483>] pty_write+0x129/0x141 Jul 20 01:52:35 werewolf kernel: [tty_default_put_char+30/35] tty_default_put_char+0x1e/0x23 Jul 20 01:52:35 werewolf kernel: [<c0209498>] tty_default_put_char+0x1e/0x23 Jul 20 01:52:35 werewolf kernel: [cdrom_ioctl+51/3282] cdrom_ioctl+0x33/0xcd2 Jul 20 01:52:35 werewolf kernel: [<c027c9b2>] cdrom_ioctl+0x33/0xcd2 Jul 20 01:52:35 werewolf kernel: [default_wake_function+0/12] default_wake_function+0x0/0xc Jul 20 01:52:35 werewolf kernel: [<c0119b07>] default_wake_function+0x0/0xc Jul 20 01:52:35 werewolf kernel: [tty_write+743/819] tty_write+0x2e7/0x333 Jul 20 01:52:35 werewolf kernel: [<c020683f>] tty_write+0x2e7/0x333 Jul 20 01:52:35 werewolf kernel: [free_pages_and_swap_cache+85/121] free_pages_and_swap_cache+0x55/0x79 Jul 20 01:52:35 werewolf kernel: [<c0152a25>] free_pages_and_swap_cache+0x55/0x79 Jul 20 01:52:35 werewolf kernel: [pg0+944604295/1069400064] idecd_ioctl+0x5d/0x71 [ide_cd] Jul 20 01:52:35 werewolf kernel: [<f88fa487>] idecd_ioctl+0x5d/0x71 [ide_cd] Jul 20 01:52:35 werewolf kernel: [blkdev_ioctl+131/1018] blkdev_ioctl+0x83/0x3fa Jul 20 01:52:35 werewolf kernel: [<c022a5a3>] blkdev_ioctl+0x83/0x3fa Jul 20 01:52:35 werewolf kernel: [sys_ioctl+425/673] sys_ioctl+0x1a9/0x2a1 Jul 20 01:52:35 werewolf kernel: [<c016a084>] sys_ioctl+0x1a9/0x2a1 Jul 20 01:52:35 werewolf kernel: [sys_gettimeofday+44/101] sys_gettimeofday+0x2c/0x65 Jul 20 01:52:35 werewolf kernel: [<c01215a9>] sys_gettimeofday+0x2c/0x65 Jul 20 01:52:35 werewolf kernel: [sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71 Jul 20 01:52:35 werewolf kernel: [<c0104005>] sysenter_past_esp+0x52/0x71 Jul 20 01:52:35 werewolf kernel: Code: c4 08 75 1f 8b 41 04 83 f8 ff 74 1f f0 83 41 04 ff 0f 98 c0 84 c0 74 0b 85 d2 75 08 89 c8 e9 40 fa ff ff c3 89 c8 e9 61 f4 ff ff <0f> 0b 1c 03 6c 55 31 c0 eb d7 85 c0 74 1e 05 00 00 00 40 c1 e8 -- J.A. Magallon <jamagallon()able!es> \ Software is like sex: werewolf!able!es \ It's better when it's free Mandrakelinux release 10.1 (Alpha 1) for i586 Linux 2.6.8-rc1-jam1 (gcc 3.4.1 (Mandrakelinux (Cooker) 3.4.1-1mdk)) #1 [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-20 0:02 ` 2.6.8-rc1-mm1 J.A. Magallon @ 2004-07-22 12:56 ` Jens Axboe 0 siblings, 0 replies; 19+ messages in thread From: Jens Axboe @ 2004-07-22 12:56 UTC (permalink / raw) To: J.A. Magallon; +Cc: Andrew Morton, linux-kernel On Tue, Jul 20 2004, J.A. Magallon wrote: > > On 2004.07.14, Andrew Morton wrote: > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/ > > > > It oopses if you try to write on a CDRW without media loaded. Who would do > such a stupid thing ? Me the impatient trying to write before the drive ends > to load the disc... It's fixed in later -mm, not sure if Andrew has merged the patch yet. I have posted it here a week or two ago, here it is again. --- /mnt/kscratch/linux-2.6.5/mm/highmem.c 2004-04-04 05:37:25.000000000 +0200 +++ linux-2.6.5-SUSE-20040713/mm/highmem.c 2004-07-15 10:28:12.142262512 +0200 @@ -309,12 +309,10 @@ static void bounce_end_io(struct bio *bi { struct bio *bio_orig = bio->bi_private; struct bio_vec *bvec, *org_vec; - int i; + int i, err = 0; if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) - goto out_eio; - - set_bit(BIO_UPTODATE, &bio_orig->bi_flags); + err = -EIO; /* * free up bounce indirect pages used @@ -327,8 +325,7 @@ static void bounce_end_io(struct bio *bi mempool_free(bvec->bv_page, pool); } -out_eio: - bio_endio(bio_orig, bio_orig->bi_size, 0); + bio_endio(bio_orig, bio_orig->bi_size, err); bio_put(bio); } --- /mnt/kscratch/linux-2.6.5/fs/bio.c 2004-07-14 23:12:42.000000000 +0200 +++ linux-2.6.5-SUSE-20040713/fs/bio.c 2004-07-15 10:30:53.263775247 +0200 @@ -549,7 +549,6 @@ static struct bio *__bio_map_user(reques bio->bi_rw |= (1 << BIO_RW); bio->bi_flags |= (1 << BIO_USER_MAPPED); - blk_queue_bounce(q, &bio); return bio; out: kfree(pages); --- /mnt/kscratch/linux-2.6.5/drivers/block/scsi_ioctl.c 2004-07-14 23:12:42.000000000 +0200 +++ linux-2.6.5-SUSE-20040713/drivers/block/scsi_ioctl.c 2004-07-15 10:26:39.089364958 +0200 @@ -167,6 +167,13 @@ static int sg_io(request_queue_t *q, str rq->flags |= REQ_BLOCK_PC; bio = rq->bio; + /* + * bounce this after holding a reference to the original bio, it's + * needed for proper unmapping + */ + if (rq->bio) + blk_queue_bounce(q, &rq->bio); + rq->timeout = (hdr->timeout * HZ) / 1000; if (!rq->timeout) rq->timeout = q->sg_timeout; --- /mnt/kscratch/linux-2.6.5/drivers/cdrom/cdrom.c 2004-07-14 23:12:42.000000000 +0200 +++ linux-2.6.5-SUSE-20040713/drivers/cdrom/cdrom.c 2004-07-15 10:27:17.219225057 +0200 @@ -1975,6 +1975,9 @@ static int cdrom_read_cdda_bpc(struct cd rq->timeout = 60 * HZ; bio = rq->bio; + if (rq->bio) + blk_queue_bounce(q, &rq->bio); + if (blk_execute_rq(q, cdi->disk, rq)) { struct request_sense *s = rq->sense; ret = -EIO; --- /mnt/kscratch/linux-2.6.5/drivers/block/ll_rw_blk.c 2004-07-14 23:12:42.000000000 +0200 +++ linux-2.6.5-SUSE-20040713/drivers/block/ll_rw_blk.c 2004-07-15 10:34:51.152967583 +0200 @@ -1807,6 +1807,12 @@ EXPORT_SYMBOL(blk_insert_request); * * A matching blk_rq_unmap_user() must be issued at the end of io, while * still in process context. + * + * Note: The mapped bio may need to be bounced through blk_queue_bounce() + * before being submitted to the device, as pages mapped may be out of + * reach. It's the callers responsibility to make sure this happens. The + * original bio must be passed back in to blk_rq_unmap_user() for proper + * unmapping. */ struct request *blk_rq_map_user(request_queue_t *q, int rw, void __user *ubuf, unsigned int len) -- Jens Axboe ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton ` (8 preceding siblings ...) 2004-07-20 0:02 ` 2.6.8-rc1-mm1 J.A. Magallon @ 2004-07-20 0:05 ` J.A. Magallon 9 siblings, 0 replies; 19+ messages in thread From: J.A. Magallon @ 2004-07-20 0:05 UTC (permalink / raw) To: Andrew Morton; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 1383 bytes --] On 2004.07.14, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc1/2.6.8-rc1-mm1/ > This allows to build aic with db4, could you apply, please: --- linux-2.6.0-test11/drivers/scsi/aic7xxx/aicasm/Makefile.orig 2003-12-02 23:52:29.000000000 +0100 +++ linux-2.6.0-test11/drivers/scsi/aic7xxx/aicasm/Makefile 2003-12-03 00:01:04.000000000 +0100 @@ -34,10 +34,14 @@ $(AICASM_CC) $(AICASM_CFLAGS) $(SRCS) -o $(PROG) $(LIBS) aicdb.h: - @if [ -e "/usr/include/db3/db_185.h" ]; then \ + @if [ -e "/usr/include/db4/db_185.h" ]; then \ + echo "#include <db4/db_185.h>" > aicdb.h; \ + elif [ -e "/usr/include/db3/db_185.h" ]; then \ echo "#include <db3/db_185.h>" > aicdb.h; \ elif [ -e "/usr/include/db2/db_185.h" ]; then \ echo "#include <db2/db_185.h>" > aicdb.h; \ + elif [ -e "/usr/include/db1/db_185.h" ]; then \ + echo "#include <db1/db_185.h>" > aicdb.h; \ elif [ -e "/usr/include/db/db_185.h" ]; then \ echo "#include <db/db_185.h>" > aicdb.h; \ elif [ -e "/usr/include/db_185.h" ]; then \ -- J.A. Magallon <jamagallon()able!es> \ Software is like sex: werewolf!able!es \ It's better when it's free Mandrakelinux release 10.1 (Alpha 1) for i586 Linux 2.6.8-rc1-jam1 (gcc 3.4.1 (Mandrakelinux (Cooker) 3.4.1-1mdk)) #1 [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.8-rc1-mm1 @ 2004-07-15 3:33 Diffie 0 siblings, 0 replies; 19+ messages in thread From: Diffie @ 2004-07-15 3:33 UTC (permalink / raw) To: Andrew Morton; +Cc: LKML, paulb [-- Attachment #1: Type: text/plain, Size: 406 bytes --] Andrew, USB hot plugging/modprobing gets in D state under 2.6.8-rc1-mm1, just like noted in this thread http://marc.theaimsgroup.com/?l=linux-kernel&m=108936908420544&w=2 from 2.6.7-mm7 Linus's 2.6.8-rc1 works OK on my nForce2 based system. Plugging keybd/mouse in PS2 slots fixes the USB stuck issue. Kernel compiled with GCC 3.3.4 on Slackware 10.0. Thanks, Paul B. -- FreeBSD the Power to Serve! [-- Attachment #2: .config --] [-- Type: application/octet-stream, Size: 29029 bytes --] # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_HPET_TIMER=y # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # # Firmware Drivers # CONFIG_EDD=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Performance-monitoring counters support # # CONFIG_PERFCTR is not set # # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_SOFTWARE_SUSPEND=y # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCI_USE_VECTOR is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # CONFIG_CDROM_PKTCDVD is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_MEGARAID is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set CONFIG_SCSI_ATA_ITE=y # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6322 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y CONFIG_DM_CRYPT=y # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y CONFIG_IEEE1394_CONFIG_ROM_IP1394=y # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m CONFIG_IEEE1394_AMDTP=m # # I2O device support # CONFIG_I2O=m # CONFIG_I2O_CONFIG is not set CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_KGDBOE is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set CONFIG_FORCEDETH=m # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m CONFIG_E1000_NAPI=y # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=m # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # CONFIG_GAMEPORT=m CONFIG_SOUND_GAMEPORT=m CONFIG_GAMEPORT_NS558=m # CONFIG_GAMEPORT_L4 is not set CONFIG_GAMEPORT_EMU10K1=m # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461x is not set CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set CONFIG_JOYSTICK_SIDEWINDER=m # CONFIG_JOYSTICK_TMDC is not set CONFIG_JOYSTICK_IFORCE=m CONFIG_JOYSTICK_IFORCE_USB=y # CONFIG_JOYSTICK_IFORCE_232 is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDDLER is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=512 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m # CONFIG_TIPAR is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=m CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_INTEL_MCH is not set CONFIG_AGP_NVIDIA=m # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_ISA is not set CONFIG_I2C_NFORCE2=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # # Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_VIA686A is not set CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83627HF=m # # Other I2C Chip support # CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=m CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_DYNAMIC_MINORS=y # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # CONFIG_USB_AUDIO=m # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_RW_DETECT=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y CONFIG_HID_FF=y CONFIG_HID_PID=y CONFIG_LOGITECH_FF=y CONFIG_THRUSTMASTER_FF=y CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_TEST is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_MINIX_FS=m CONFIG_ROMFS_FS=m CONFIG_QUOTA=y CONFIG_QFMT_V1=y CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS_XATTR=y # CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_POSIX is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=m # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_SLAB is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_KGDB is not set # CONFIG_FRAME_POINTER is not set CONFIG_4KSTACKS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set # # Library routines # # CONFIG_CRC_CCITT is not set CONFIG_CRC32=m CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y ^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2004-07-27 18:01 UTC | newest] Thread overview: 19+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-07-14 1:25 2.6.8-rc1-mm1 Andrew Morton 2004-07-14 7:29 ` 2.6.8-rc1-mm1 Andrew Morton 2004-07-14 8:11 ` 2.6.8-rc1-mm1 David Howells 2004-07-14 16:36 ` 2.6.8-rc1-mm1 John Cherry 2004-07-14 18:49 ` [patch] 2.6.8-rc1-mm1: USB w9968cf compile error Adrian Bunk 2004-07-14 19:03 ` Greg KH 2004-07-14 19:08 ` Adrian Bunk 2004-07-14 20:29 ` 2.6.8-rc1-mm1 Dominik Karall 2004-07-14 20:43 ` [patch] 2.6.8-rc1-mm1: 8139too: uninline rtl8139_start_thread Adrian Bunk 2004-07-14 20:45 ` Jeff Garzik 2004-07-27 18:00 ` Jeff Garzik 2004-07-14 21:08 ` 2.6.8-rc1-mm1 Dominik Karall 2004-07-14 21:53 ` 2.6.8-rc1-mm1 Tim Bird 2004-07-15 10:35 ` 2.6.8-rc1-mm1 Ralf Hildebrandt 2004-07-18 3:53 ` [patch] 2.6.8-rc1-mm1: work around broken USB DocBook generation Adrian Bunk 2004-07-20 0:02 ` 2.6.8-rc1-mm1 J.A. Magallon 2004-07-22 12:56 ` 2.6.8-rc1-mm1 Jens Axboe 2004-07-20 0:05 ` 2.6.8-rc1-mm1 J.A. Magallon -- strict thread matches above, loose matches on Subject: below -- 2004-07-15 3:33 2.6.8-rc1-mm1 Diffie
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox