Re: 2.4.20-ac1 KT400 AGP support

[Nicolas Mailhot <Nicolas.Mailhot@laPoste.net>]

[-- Attachment #1: Type: text/plain, Size: 886 bytes --]

>Dave Jones wrote :
>On Fri, Dec 13, 2002 at 07:57:59PM -0600, Courtney Grimland wrote:
> > You should be able to set AGP to 4x or 2x in the BIOS.

> Aparently some KT400 BIOS's got clever, and took away the option.
> They switch to AGP 3.0 if an AGP 3.0 card is present, and drop
> back to 2.0 if a 2.0 card is present.

Well they didn't get as far as removing the option but secreted it
in a bios setup screen that can only be accessed via a magic key
sequence (which can be found after some serious googling). 

Real nice for a normal user when it works (and so far I didn't heard 
from anyone their agp recognition was broken). In fact I spend quite
a long time searching why my system just-worked when people started 
reporting KT400 problems.

I'd be really surprised if my board (GA-7VAX) did this and the 
GA-7VAXP didn't.

Regards,

-- 
Nicolas Mailhot

[-- Attachment #2: Ceci est une partie de message numériquement signée --]
[-- Type: application/pgp-signature, Size: 189 bytes --]