From: Dumitru Ciobarcianu <Dumitru.Ciobarcianu@iNES.RO>
To: jt@hpl.hp.com
Cc: Marcelo Tosatti <marcelo@conectiva.com.br>,
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2.4] : donauboe IrDA driver (resend)
Date: 19 Dec 2002 17:05:16 +0200 [thread overview]
Message-ID: <1040310314.1225.9.camel@localhost.localdomain> (raw)
In-Reply-To: <20021219024632.GB1746@bougret.hpl.hp.com>
[-- Attachment #1: Type: text/plain, Size: 4912 bytes --]
Hello,
This module does not load all the time for me.
If I do an "modprobe donauboe" it gives something like:
TX: (144,80) (144,84) (144,80) (144,84) (0,00) (0,00) (0,00) (0,00)
[9600]
RRTSRRT 4181
RX: (130,00) (130,00) (130,00) (130,00) (0,80) (0,80) (0,80) (0,80)
TX: (144,80) (144,84) (144,80) (144,84) (0,00) (0,00) (0,00) (0,00)
[115200]
RRTSRRT 4117
RX: (130,00) (130,00) (130,00) (130,00) (0,80) (0,80) (0,80) (0,80)
TX: (128,84) (128,90) (128,84) (128,b4) (0,00) (0,00) (0,00) (0,00)
[4000000]
TSRTSTR 3861
RX: (264,00) (264,20) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80)
TX: (128,84) (128,90) (128,84) (128,b4) (0,00) (0,00) (0,00) (0,00)
[1152000]
TSTST<3>toshoboeprobe(1152000) failed filter test
toshoboe: Register dump:
Interrupts: Tx:203 Rx:0 TxUnder:0 RxOver:0 Sip:0
RX 00 TX 44 RingBase 0f355c00
RING_SIZE 11 IER ff ISR 07
CONFIG1 08 STATUS 00
CONFIG0 4ea0 ENABLE 937c
NEW_PCONFIG 0101 CURR_PCONFIG 0101
MAXLEN 0c04 RXCOUNT 0100
Ring at 0f355c00:
RX: (0,80) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80) (0,80)
TX: (128,00) (128,00) (128,00) (128,00) (0,00) (0,00) (0,00) (0,00)
If I try a few more times it will finally load...
The kernel is 2.4.20.0.pp.9 (RH rawhide kernel - 2.4.20-ac1 based) +
acpi20021205 . I don't know why lspci shows "Toshiba Tecra 8100". The
machine is an Toshiba Satellite Pro 4320.
Output of lspci:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
Subsystem: Toshiba America Info Systems Toshiba Tecra 8100 Laptop
System Chipset
Flags: bus master, medium devsel, latency 64
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f0000000-f7ffffff
00:05.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:05.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at fff0 [size=16]
00:05.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at ff80 [size=32]
00:05.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
00:07.0 Communication controller: Lucent Microelectronics 56k WinModem
(rev 01)
Subsystem: Toshiba America Info Systems Internal V.90 Modem
Flags: bus master, medium devsel, latency 0, IRQ 3
Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
I/O ports at 02f8 [size=8]
I/O ports at 1c00 [size=256]
Capabilities: <available only to root>
00:09.0 IRDA controller: Toshiba America Info Systems FIR Port Type-DO
Subsystem: Toshiba America Info Systems FIR Port Type-DO
Flags: slow devsel, IRQ 11
I/O ports at ff60 [size=32]
Capabilities: <available only to root>
00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, slow devsel, latency 168, IRQ 11
Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=15, subordinate=15, sec-latency=0
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S
Audio Controller] (rev 02)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at efff8000 (32-bit, non-prefetchable) [size=32K]
I/O ports at ff00 [size=64]
I/O ports at fefc [size=4]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev
11) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: <available only to root>
--
Cioby
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2002-12-19 14:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-19 2:46 [PATCH 2.4] : donauboe IrDA driver (resend) Jean Tourrilhes
2002-12-19 15:05 ` Dumitru Ciobarcianu [this message]
2002-12-19 18:56 ` Jean Tourrilhes
2002-12-20 10:55 ` Dumitru Ciobarcianu
2002-12-20 18:05 ` Christian Gennerat
2002-12-21 9:16 ` Dumitru Ciobarcianu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1040310314.1225.9.camel@localhost.localdomain \
--to=dumitru.ciobarcianu@ines.ro \
--cc=jt@hpl.hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox