public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Robert Love <rml@tech9.net>
To: linux-kernel@vger.kernel.org
Cc: mbligh@us.ibm.com
Subject: [PATCH] updated scheduler tunables
Date: 11 Jan 2003 23:01:22 -0500	[thread overview]
Message-ID: <1042344081.834.23.camel@phantasy> (raw)

Updated scheduler tuning patch against 2.5.56.  This exports the core
scheduler parameters via both procfs and sysctl:

        [22:56:51]rml@phantasy:~$ pef /proc/sys/sched/
        child_penalty=95
        exit_weight=3
        interactive_delta=2
        max_sleep_avg=2000
        max_timeslice=100
        min_timeslice=10
        parent_penalty=100
        prio_bonus_ratio=10
        starvation_limit=2000

The major update here is parameter checking: the minimum values are
checked to prevent bad parameters (primarily preventing a zero or
negative one value in cases where they could cause a divide-by-zero).

mbligh, I know this has been in your queue for awhile... this updated
version should apply OK.

	Robert Love

 Documentation/filesystems/proc.txt |   87 +++++++++++++++++++++++++++++++++++++
 include/linux/sysctl.h             |   15 +++++-
 kernel/sched.c                     |   31 +++++++++----
 kernel/sysctl.c                    |   44 ++++++++++++++++++
 4 files changed, 166 insertions(+), 11 deletions(-)


diff -urN linux-2.5.56/Documentation/filesystems/proc.txt linux/Documentation/filesystems/proc.txt
--- linux-2.5.56/Documentation/filesystems/proc.txt	2003-01-10 15:11:40.000000000 -0500
+++ linux/Documentation/filesystems/proc.txt	2003-01-11 22:19:41.000000000 -0500
@@ -37,6 +37,7 @@
   2.8	/proc/sys/net/ipv4 - IPV4 settings
   2.9	Appletalk
   2.10	IPX
+  2.11  /proc/sys/sched - scheduler tunables
 
 ------------------------------------------------------------------------------
 Preface
@@ -1663,6 +1664,92 @@
 gives the  destination  network, the router node (or Directly) and the network
 address of the router (or Connected) for internal networks.
 
+2.11 /proc/sys/sched - scheduler tunables
+-----------------------------------------
+
+Useful knobs for tuning the scheduler live in /proc/sys/sched.
+
+child_penalty
+-------------
+
+Percentage of the parent's sleep_avg that children inherit.  sleep_avg is
+a running average of the time a process spends sleeping.  Tasks with high
+sleep_avg values are considered interactive and given a higher dynamic
+priority and a larger timeslice.  You typically want this some value just
+under 100.
+
+exit_weight
+-----------
+
+When a CPU hog task exits, its parent's sleep_avg is reduced by a factor of
+exit_weight against the exiting task's sleep_avg.
+
+interactive_delta
+-----------------
+
+If a task is "interactive" it is reinserted into the active array after it
+has expired its timeslice, instead of being inserted into the expired array.
+How "interactive" a task must be in order to be deemed interactive is a
+function of its nice value.  This interactive limit is scaled linearly by nice
+value and is offset by the interactive_delta.
+
+max_sleep_avg
+-------------
+
+max_sleep_avg is the largest value (in ms) stored for a task's running sleep
+average.  The larger this value, the longer a task needs to sleep to be
+considered interactive (maximum interactive bonus is a function of
+max_sleep_avg).
+
+max_timeslice
+-------------
+
+Maximum timeslice, in milliseconds.  This is the value given to tasks of the
+highest dynamic priority.
+
+min_timeslice
+-------------
+
+Minimum timeslice, in milliseconds.  This is the value given to tasks of the
+lowest dynamic priority.  Every task gets at least this slice of the processor
+per array switch.
+
+parent_penalty
+--------------
+
+Percentage of the parent's sleep_avg that it retains across a fork().
+sleep_avg is a running average of the time a process spends sleeping.  Tasks
+with high sleep_avg values are considered interactive and given a higher
+dynamic priority and a larger timeslice.  Normally, this value is 100 and thus
+task's retain their sleep_avg on fork.  If you want to punish interactive
+tasks for forking, set this below 100.
+
+prio_bonus_ratio
+----------------
+
+Middle percentage of the priority range that tasks can receive as a dynamic
+priority.  The default value of 25% ensures that nice values at the
+extremes are still enforced.  For example, nice +19 interactive tasks will
+never be able to preempt a nice 0 CPU hog.  Setting this higher will increase
+the size of the priority range the tasks can receive as a bonus.  Setting
+this lower will decrease this range, making the interactivity bonus less
+apparent and user nice values more applicable.
+
+starvation_limit
+----------------
+
+Sufficiently interactive tasks are reinserted into the active array when they
+run out of timeslice.  Normally, tasks are inserted into the expired array.
+Reinserting interactive tasks into the active array allows them to remain
+runnable, which is important to interactive performance.  This could starve
+expired tasks, however, since the interactive task could prevent the array
+switch.  To prevent starving the tasks on the expired array for too long. the
+starvation_limit is the longest (in ms) we will let the expired array starve
+at the expense of reinserting interactive tasks back into active.  Higher
+values here give more preferance to running interactive tasks, at the expense
+of expired tasks.  Lower values provide more fair scheduling behavior, at the
+expense of interactivity.  The units are in milliseconds.
+
 ------------------------------------------------------------------------------
 Summary
 ------------------------------------------------------------------------------
diff -urN linux-2.5.56/include/linux/sysctl.h linux/include/linux/sysctl.h
--- linux-2.5.56/include/linux/sysctl.h	2003-01-10 15:11:55.000000000 -0500
+++ linux/include/linux/sysctl.h	2003-01-11 22:19:41.000000000 -0500
@@ -66,7 +66,8 @@
 	CTL_DEV=7,		/* Devices */
 	CTL_BUS=8,		/* Busses */
 	CTL_ABI=9,		/* Binary emulation */
-	CTL_CPU=10		/* CPU stuff (speed scaling, etc) */
+	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
+	CTL_SCHED=11,		/* scheduler tunables */
 };
 
 /* CTL_BUS names: */
@@ -157,6 +158,18 @@
 	VM_LOWER_ZONE_PROTECTION=20,/* Amount of protection of lower zones */
 };
 
+/* Tunable scheduler parameters in /proc/sys/sched/ */
+enum {
+	SCHED_MIN_TIMESLICE=1,		/* minimum process timeslice */
+	SCHED_MAX_TIMESLICE=2,		/* maximum process timeslice */
+	SCHED_CHILD_PENALTY=3,		/* penalty on fork to child */
+	SCHED_PARENT_PENALTY=4,		/* penalty on fork to parent */
+	SCHED_EXIT_WEIGHT=5,		/* penalty to parent of CPU hog child */
+	SCHED_PRIO_BONUS_RATIO=6,	/* percent of max prio given as bonus */
+	SCHED_INTERACTIVE_DELTA=7,	/* delta used to scale interactivity */
+	SCHED_MAX_SLEEP_AVG=8,		/* maximum sleep avg attainable */
+	SCHED_STARVATION_LIMIT=9,	/* no re-active if expired is starved */
+};
 
 /* CTL_NET names: */
 enum
diff -urN linux-2.5.56/kernel/sched.c linux/kernel/sched.c
--- linux-2.5.56/kernel/sched.c	2003-01-10 15:12:15.000000000 -0500
+++ linux/kernel/sched.c	2003-01-11 22:19:41.000000000 -0500
@@ -57,16 +57,29 @@
  * Minimum timeslice is 10 msecs, default timeslice is 150 msecs,
  * maximum timeslice is 300 msecs. Timeslices get refilled after
  * they expire.
+ *
+ * They are configurable via /proc/sys/sched
  */
-#define MIN_TIMESLICE		( 10 * HZ / 1000)
-#define MAX_TIMESLICE		(300 * HZ / 1000)
-#define CHILD_PENALTY		95
-#define PARENT_PENALTY		100
-#define EXIT_WEIGHT		3
-#define PRIO_BONUS_RATIO	25
-#define INTERACTIVE_DELTA	2
-#define MAX_SLEEP_AVG		(2*HZ)
-#define STARVATION_LIMIT	(2*HZ)
+
+int min_timeslice = (10 * HZ) / 1000;
+int max_timeslice = (300 * HZ) / 1000;
+int child_penalty = 95;
+int parent_penalty = 100;
+int exit_weight = 3;
+int prio_bonus_ratio = 25;
+int interactive_delta = 2;
+int max_sleep_avg = 2 * HZ;
+int starvation_limit = 2 * HZ;
+
+#define MIN_TIMESLICE		(min_timeslice)
+#define MAX_TIMESLICE		(max_timeslice)
+#define CHILD_PENALTY		(child_penalty)
+#define PARENT_PENALTY		(parent_penalty)
+#define EXIT_WEIGHT		(exit_weight)
+#define PRIO_BONUS_RATIO	(prio_bonus_ratio)
+#define INTERACTIVE_DELTA	(interactive_delta)
+#define MAX_SLEEP_AVG		(max_sleep_avg)
+#define STARVATION_LIMIT	(starvation_limit)
 
 /*
  * If a task is 'interactive' then we reinsert it in the active
diff -urN linux-2.5.56/kernel/sysctl.c linux/kernel/sysctl.c
--- linux-2.5.56/kernel/sysctl.c	2003-01-10 15:11:22.000000000 -0500
+++ linux/kernel/sysctl.c	2003-01-11 22:19:41.000000000 -0500
@@ -55,6 +55,15 @@
 extern int cad_pid;
 extern int pid_max;
 extern int sysctl_lower_zone_protection;
+extern int min_timeslice;
+extern int max_timeslice;
+extern int child_penalty;
+extern int parent_penalty;
+extern int exit_weight;
+extern int prio_bonus_ratio;
+extern int interactive_delta;
+extern int max_sleep_avg;
+extern int starvation_limit;
 
 /* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
 static int maxolduid = 65535;
@@ -112,6 +121,7 @@
 
 static ctl_table kern_table[];
 static ctl_table vm_table[];
+static ctl_table sched_table[];
 #ifdef CONFIG_NET
 extern ctl_table net_table[];
 #endif
@@ -156,6 +166,7 @@
 	{CTL_FS, "fs", NULL, 0, 0555, fs_table},
 	{CTL_DEBUG, "debug", NULL, 0, 0555, debug_table},
         {CTL_DEV, "dev", NULL, 0, 0555, dev_table},
+	{CTL_SCHED, "sched", NULL, 0, 0555, sched_table},
 	{0}
 };
 
@@ -358,7 +369,38 @@
 
 static ctl_table dev_table[] = {
 	{0}
-};  
+};
+
+static ctl_table sched_table[] = {
+	{SCHED_MAX_TIMESLICE, "max_timeslice", &max_timeslice,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &one, NULL},
+	{SCHED_MIN_TIMESLICE, "min_timeslice", &min_timeslice,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &one, NULL},
+	{SCHED_CHILD_PENALTY, "child_penalty", &child_penalty,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{SCHED_PARENT_PENALTY, "parent_penalty", &parent_penalty,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{SCHED_EXIT_WEIGHT, "exit_weight", &exit_weight,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{SCHED_PRIO_BONUS_RATIO, "prio_bonus_ratio", &prio_bonus_ratio,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{SCHED_INTERACTIVE_DELTA, "interactive_delta", &interactive_delta,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{SCHED_MAX_SLEEP_AVG, "max_sleep_avg", &max_sleep_avg,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &one, NULL},
+	{SCHED_STARVATION_LIMIT, "starvation_limit", &starvation_limit,
+	 sizeof(int), 0644, NULL, &proc_dointvec_minmax,
+	 &sysctl_intvec, NULL, &zero, NULL},
+	{0}
+};
 
 extern void init_irq_proc (void);
 




             reply	other threads:[~2003-01-12  3:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-01-12  4:01 Robert Love [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-12-17  2:15 [PATCH] updated scheduler tunables Robert Love
2002-12-17  2:44 ` Hanna Linder
2002-12-17  9:33   ` Marc-Christian Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1042344081.834.23.camel@phantasy \
    --to=rml@tech9.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mbligh@us.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox