From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 22 Feb 2003 08:35:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 22 Feb 2003 08:35:52 -0500 Received: from catv-50622ca4.bp13catv.broadband.hu ([80.98.44.164]:22788 "HELO dap.index") by vger.kernel.org with SMTP id ; Sat, 22 Feb 2003 08:34:35 -0500 Subject: cmd680 doesn't works fine with 2.4.20 From: Pallai Roland To: linux-kernel@vger.kernel.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.5 Date: 22 Feb 2003 14:44:41 +0100 Message-Id: <1045921481.513.22.camel@dap> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, quote from http://www.uwsg.iu.edu/hypermail/linux/kernel/0207.3/0356.html: " I just bought a new kouwell udma133+raid (KW-571B) card that has a cmd680 chip on it. the card detects nicely my HDs, but after when linux boots I get something like this: [...] Jul 23 18:43:28 wk kernel: hde: MAXTOR 4K080H4, ATA DISK drive Jul 23 18:43:28 wk kernel: hdf: 00MAXTOR 4K080H4, ATA DISK drive Jul 23 18:43:28 wk kernel: hde: host protected area => 1 Jul 23 18:43:28 wk kernel: hde: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100) Jul 23 18:43:28 wk kernel: hdf: task_no_data_intr: status=0x53 { DriveReady SeekComplete Index Error } Jul 23 18:43:28 wk kernel: hdf: task_no_data_intr: error=0x04 { DriveStatusError } Jul 23 18:43:28 wk kernel: hdf: -122814464 sectors (2136142 MB) w/1KiB Cache, CHS=259704/255/63, DMA In both cases the SLAVE drive wasnt detected correctly, and after reported errors. after I tried this out with another card from the same brand, I tried primary and secondary channel, no luck, I got these same sypmtoms. all drives worked perfect with promise controllers. the kernel I used: 2.4.19-rc3-ac3. " I've same problem with kernel 2.4.20 on every CMD680-based card from different manufacturers. big (eg.: Maxtor DiamondMax Plus9 - 120G) slave drives wasn't works and detected incorrectly _until the first soft reboot_! after that everything works fine, but not on the first boot.. driver problem or it's works for anyone?? please cc me, -- DaP