From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Felipe Alfaro Solana <felipe_alfaro@linuxmail.org>
Cc: Linux Kernel List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@digeo.com>
Subject: Re: 2.5.64-mm1: Badness in request_irq
Date: 06 Mar 2003 21:30:56 -0800 [thread overview]
Message-ID: <1047015055.1538.7.camel@ixodes.goop.org> (raw)
In-Reply-To: <20030306141859.19645.qmail@linuxmail.org>
[-- Attachment #1: Type: text/plain, Size: 3976 bytes --]
On Thu, 2003-03-06 at 06:18, Felipe Alfaro Solana wrote:
> Hello,
>
> I have just installed and compiled 2.5.64-mm1 using gcc-3.2.2 and,
> when booting the system, I have found the
> following error on the kernel ring:
>
> Badness in request_irq at arch/i386/kernel/irq.c:475
> Call Trace: [<c010afdd>] [<d08b3d3a>] [<d08b18c0>] [<d08b42c8>] [<d08b024e>] [<d08b42b0>]
> [<d08b49c0>] [<d08b49e8>] [<c0191d6e>] [<d08b496c>] [<d08b49e8>] [<c01947f5>] [<d08b49e8>]
> [<c019491c>] [<d08b49e8>] [<d08b4a04>] [<c0194c10>] [<d08b49e8>] [<d08bb160>] [<c0194fff>]
> [<d08b49e8>] [<c0191eab>] [<d08b49e8>] [<d08a0019>] [<d08b49c0>] [<d08bb160>] [<c01302cd>]
> [<c010969e>]
I'm getting this as well on both my desktop and laptop machines.
My desktop is a P4 machine with an Intel 845 chipset. It seems to be
coming out of the PIIX driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Found IRQ 10 for device 00:1f.1
PCI: Sharing IRQ 10 with 00:1d.2
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD1200JB-00CRA1, ATA DISK drive
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace:
[<c010b240>] request_irq+0xe2/0x116
[<c020c2ec>] init_irq+0x12e/0x342
[<c020af9a>] ide_intr+0x0/0x12a
[<c020c95f>] hwif_init+0xe3/0x27c
[<c020c060>] probe_hwif_init+0x2c/0x78
[<c021db14>] ide_setup_pci_device+0x4e/0x74
[<c0209c4c>] piix_init_one+0x32/0x38
[<c010507b>] init+0x2d/0x146
[<c010504e>] init+0x0/0x146
[<c01073b9>] kernel_thread_helper+0x5/0xc
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ATAPI 48X CDROM, ATAPI CD/DVD-ROM drive
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace:
[<c010b240>] request_irq+0xe2/0x116
[<c020c2ec>] init_irq+0x12e/0x342
[<c020af9a>] ide_intr+0x0/0x12a
[<c020c95f>] hwif_init+0xe3/0x27c
[<c020c060>] probe_hwif_init+0x2c/0x78
[<c021db33>] ide_setup_pci_device+0x6d/0x74
[<c0209c4c>] piix_init_one+0x32/0x38
[<c010507b>] init+0x2d/0x146
[<c010504e>] init+0x0/0x146
[<c01073b9>] kernel_thread_helper+0x5/0xc
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
The laptop is getting the message in the ALSA i810 audio driver:
PCI: Found IRQ 11 for device 00:00.1
PCI: Sharing IRQ 11 with 00:0b.1
Badness in request_irq at arch/i386/kernel/irq.c:475
Call Trace:
[<cc8b86c0>] snd_intel8x0_interrupt+0x0/0x190 [snd_intel8x0]
[<c010ad33>] request_irq+0x63/0xd0
[<cc8ba8e5>] snd_intel8x0_create+0x245/0x460 [snd_intel8x0]
[<cc8b86c0>] snd_intel8x0_interrupt+0x0/0x190 [snd_intel8x0]
[<cc8bb2cb>] .LC54+0x0/0x13 [snd_intel8x0]
[<cc8babdf>] snd_intel8x0_probe+0xdf/0x320 [snd_intel8x0]
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<c01c237f>] pci_device_probe+0x3f/0x60
[<cc8be50c>] snd_intel8x0_ids+0x8c/0x1a0 [snd_intel8x0]
[<cc8beb00>] driver+0x0/0x98 [snd_intel8x0]
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<c01ca314>] bus_match+0x34/0x60
[<c01ca3d4>] driver_attach+0x34/0x60
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<cc8beb48>] driver+0x48/0x98 [snd_intel8x0]
[<c01ca686>] bus_add_driver+0x96/0xc0
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<cc8bed40>] +0x0/0x100 [snd_intel8x0]
[<c01c2496>] pci_register_driver+0x46/0x60
[<cc8beb28>] driver+0x28/0x98 [snd_intel8x0]
[<cc85f00f>] +0xf/0x80 [snd_intel8x0]
[<cc8beb00>] driver+0x0/0x98 [snd_intel8x0]
[<c012ed8c>] sys_init_module+0x7c/0x200
[<cc8bed40>] +0x0/0x100 [snd_intel8x0]
[<c012ee52>] sys_init_module+0x142/0x200
[<c0108e47>] syscall_call+0x7/0xb
PCI: Setting latency timer of device 00:00.1 to 64
intel8x0: clocking to 48000
lspci output for both machines attached.
J
[-- Attachment #2: desktop-lspci.txt --]
[-- Type: text/plain, Size: 6810 bytes --]
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
Subsystem: Asustek Computer, Inc.: Unknown device 8088
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: e6000000-e7dfffff
Prefetchable memory behind bridge: e7f00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at d000 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: e5000000-e57fffff
Prefetchable memory behind bridge: e7e00000-e7efffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 8089
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 GTS] (rev a3) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c50
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at e7ff0000 [disabled] [size=64K]
Capabilities: <available only to root>
02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b800 [size=256]
Capabilities: <available only to root>
02:0a.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22)
Subsystem: Netgear FA310TX Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b400 [size=128]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=256K]
02:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs CT4830 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b000 [size=32]
Capabilities: <available only to root>
02:0c.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a800 [size=8]
Capabilities: <available only to root>
[-- Attachment #3: laptop-lspci.txt --]
[-- Type: text/plain, Size: 5799 bytes --]
00:00.0 Host bridge: Intel Corporation 82440MX I/O Controller (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
00:00.1 Multimedia audio controller: Intel Corporation 82440MX AC'97 Audio Controller
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at fd00 [size=256]
Region 1: I/O ports at fcc0 [size=64]
00:02.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ffefff00 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 02f8 [size=8]
Region 2: I/O ports at 1c00 [size=256]
Capabilities: <available only to root>
00:04.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/MX-/IX (rev 11) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at 000c0000 [disabled] [size=64K]
Capabilities: <available only to root>
00:07.0 Bridge: Intel Corporation 82440MX PCI to ISA Bridge (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f870 [size=16]
00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at f840 [size=32]
00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 IRDA controller: Toshiba America Info Systems FIR Port Type-DO
Subsystem: Toshiba America Info Systems FIR Port Type-DO
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f820 [size=32]
Capabilities: <available only to root>
00:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=0
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 (rev 07)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
Memory window 0: 10c00000-10fff000 (prefetchable)
Memory window 1: 11000000-113ff000
I/O window 0: 00001800-000018ff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
05:00.0 Ethernet controller: Bridgecom, Inc: Unknown device 1985 (rev 11)
Subsystem: Ambicom Inc: Unknown device 2103
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at 11000000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 10c00000 [size=128K]
Capabilities: <available only to root>
next prev parent reply other threads:[~2003-03-07 5:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-06 14:18 2.5.64-mm1: Badness in request_irq Felipe Alfaro Solana
2003-03-07 5:30 ` Jeremy Fitzhardinge [this message]
2003-03-07 5:53 ` Andrew Morton
2003-03-07 13:01 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1047015055.1538.7.camel@ixodes.goop.org \
--to=jeremy@goop.org \
--cc=akpm@digeo.com \
--cc=felipe_alfaro@linuxmail.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox