From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: Re: [PATCH] i2c driver changes for 2.5.64
Date: Thu, 13 Mar 2003 16:55 -0800 [thread overview]
Message-ID: <10476033262095@kroah.com> (raw)
In-Reply-To: <10476033263399@kroah.com>
ChangeSet 1.1114, 2003/03/13 16:39:40-08:00, greg@kroah.com
i2c: add driver model support to i2c adapter drivers
drivers/i2c/busses/i2c-ali15x3.c | 6 ++++--
drivers/i2c/busses/i2c-amd756.c | 3 +++
drivers/i2c/busses/i2c-amd8111.c | 5 ++++-
drivers/i2c/busses/i2c-i801.c | 5 ++++-
drivers/i2c/busses/i2c-piix4.c | 3 +++
drivers/i2c/i2c-core.c | 13 +++++++++++++
include/linux/i2c.h | 2 ++
7 files changed, 33 insertions(+), 4 deletions(-)
diff -Nru a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
--- a/drivers/i2c/busses/i2c-ali15x3.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/busses/i2c-ali15x3.c Thu Mar 13 16:56:52 2003
@@ -531,10 +531,12 @@
return -ENODEV;
}
+ /* set up the driverfs linkage to our parent device */
+ ali15x3_adapter.dev.parent = &dev->dev;
+
sprintf(ali15x3_adapter.name, "SMBus ALI15X3 adapter at %04x",
ali15x3_smba);
- i2c_add_adapter(&ali15x3_adapter);
- return 0;
+ return i2c_add_adapter(&ali15x3_adapter);
}
static void __devexit ali15x3_remove(struct pci_dev *dev)
diff -Nru a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
--- a/drivers/i2c/busses/i2c-amd756.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/busses/i2c-amd756.c Thu Mar 13 16:56:52 2003
@@ -375,6 +375,9 @@
printk(KERN_DEBUG DRV_NAME ": AMD756_smba = 0x%X\n", amd756_ioport);
#endif
+ /* set up the driverfs linkage to our parent device */
+ amd756_adapter.dev.parent = &pdev->dev;
+
sprintf(amd756_adapter.name,
"SMBus AMD75x adapter at %04x", amd756_ioport);
diff -Nru a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
--- a/drivers/i2c/busses/i2c-amd8111.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/busses/i2c-amd8111.c Thu Mar 13 16:56:52 2003
@@ -363,6 +363,9 @@
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
+ /* set up the driverfs linkage to our parent device */
+ smbus->adapter.dev.parent = &dev->dev;
+
error = i2c_add_adapter(&smbus->adapter);
if (error)
goto out_release_region;
@@ -389,7 +392,7 @@
}
static struct pci_driver amd8111_driver = {
- .name = "amd8111 smbus 2.0",
+ .name = "amd8111 smbus",
.id_table = amd8111_ids,
.probe = amd8111_probe,
.remove = __devexit_p(amd8111_remove),
diff -Nru a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
--- a/drivers/i2c/busses/i2c-i801.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/busses/i2c-i801.c Thu Mar 13 16:56:52 2003
@@ -672,9 +672,12 @@
return -ENODEV;
}
+ /* set up the driverfs linkage to our parent device */
+ i801_adapter.dev.parent = &dev->dev;
+
sprintf(i801_adapter.name, "SMBus I801 adapter at %04x",
i801_smba);
- i2c_add_adapter(&i801_adapter);
+ return i2c_add_adapter(&i801_adapter);
}
static void __devexit i801_remove(struct pci_dev *dev)
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- a/drivers/i2c/busses/i2c-piix4.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/busses/i2c-piix4.c Thu Mar 13 16:56:52 2003
@@ -473,6 +473,9 @@
if (retval)
return retval;
+ /* set up the driverfs linkage to our parent device */
+ piix4_adapter.dev.parent = &dev->dev;
+
sprintf(piix4_adapter.name, "SMBus PIIX4 adapter at %04x",
piix4_smba);
diff -Nru a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
--- a/drivers/i2c/i2c-core.c Thu Mar 13 16:56:52 2003
+++ b/drivers/i2c/i2c-core.c Thu Mar 13 16:56:52 2003
@@ -87,6 +87,16 @@
init_MUTEX(&adap->bus);
init_MUTEX(&adap->list);
+ /* Add the adapter to the driver core.
+ * If the parent pointer is not set up,
+ * we add this adapter to the legacy bus.
+ */
+ if (adap->dev.parent == NULL)
+ adap->dev.parent = &legacy_bus;
+ sprintf(adap->dev.bus_id, "i2c-%d", i);
+ strcpy(adap->dev.name, "i2c controller");
+ device_register(&adap->dev);
+
/* inform drivers of new adapters */
for (j=0;j<I2C_DRIVER_MAX;j++)
if (drivers[j]!=NULL &&
@@ -153,6 +163,9 @@
}
i2cproc_remove(i);
+
+ /* clean up the sysfs representation */
+ device_unregister(&adap->dev);
adapters[i] = NULL;
diff -Nru a/include/linux/i2c.h b/include/linux/i2c.h
--- a/include/linux/i2c.h Thu Mar 13 16:56:52 2003
+++ b/include/linux/i2c.h Thu Mar 13 16:56:52 2003
@@ -231,12 +231,14 @@
int timeout;
int retries;
+ struct device dev; /* the adapter device */
#ifdef CONFIG_PROC_FS
/* No need to set this when you initialize the adapter */
int inode;
#endif /* def CONFIG_PROC_FS */
};
+#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
/*flags for the driver struct: */
#define I2C_DF_NOTIFY 0x01 /* notify on bus (de/a)ttaches */
next prev parent reply other threads:[~2003-03-14 0:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-14 0:50 [BK PATCH] i2c driver changes for 2.5.64 Greg KH
2003-03-14 0:55 ` [PATCH] " Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH
2003-03-14 0:55 ` Greg KH [this message]
2003-03-15 9:49 ` Vojtech Pavlik
2003-03-15 21:46 ` Greg KH
2003-03-15 22:06 ` Vojtech Pavlik
2003-03-14 8:28 ` Christoph Hellwig
2003-03-14 8:21 ` Christoph Hellwig
2003-03-14 8:53 ` Greg KH
2003-03-14 8:19 ` Christoph Hellwig
2003-03-14 8:56 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10476033262095@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox