From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Jens Axboe <axboe@suse.de>
Cc: Linux Kernel List <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@digeo.com>
Subject: Re: 2.5.64-mm6: oops in elv_remove_request
Date: 14 Mar 2003 09:59:35 -0800 [thread overview]
Message-ID: <1047664774.25536.47.camel@ixodes.goop.org> (raw)
In-Reply-To: <20030314113732.GC791@suse.de>
On Fri, 2003-03-14 at 03:37, Jens Axboe wrote:
> Can you send me the output of -prcap?
# cdrecord -prcap
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Drive capabilities, per MMC-3 page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does not read DVD-ROM media
Does not read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does deliver composite A/V data
Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 7056 kB/s (CD 40x, DVD 5x)
Current read speed: 7056 kB/s (CD 40x, DVD 5x)
Maximum write speed: 8467 kB/s (CD 48x, DVD 6x)
Current write speed: 8467 kB/s (CD 48x, DVD 6x)
Rotational control selected: CLV/PCAV
Buffer size in KB: 4096
Copy management revision supported: 0
Number of supported write speeds: 8
Write speed # 0: 8467 kB/s CLV/PCAV (CD 48x, DVD 6x)
Write speed # 1: 7056 kB/s CLV/PCAV (CD 40x, DVD 5x)
Write speed # 2: 5645 kB/s CLV/PCAV (CD 32x, DVD 4x)
Write speed # 3: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x)
Write speed # 4: 3528 kB/s CLV/PCAV (CD 20x, DVD 2x)
Write speed # 5: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x)
Write speed # 6: 1411 kB/s CLV/PCAV (CD 8x, DVD 1x)
Write speed # 7: 706 kB/s CLV/PCAV (CD 4x, DVD 0x)
But... When I first ran -checkdrive this morning, it gave me good
results:
# cdrecord -checkdrive
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
But immediately afterwards:
# cdrecord -checkdrive
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC
Supported modes:
Ejecting and reinserting the disc seems to restore things:
# cdrecord -checkdrive
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Once:
# cdrecord -checkdrive
Cdrecord 2.01a05 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?rg Schilling
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W4824A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE VARIREC
Supported modes:
Notice the "version" and "response format" fields have changed.
J
next prev parent reply other threads:[~2003-03-14 17:48 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-13 17:22 2.5.64-mm6: kernel BUG at kernel/timer.c:155! Jeremy Fitzhardinge
2003-03-13 17:45 ` Jeremy Fitzhardinge
2003-03-13 17:54 ` Jens Axboe
2003-03-13 18:04 ` Jeremy Fitzhardinge
2003-03-13 19:02 ` Jens Axboe
2003-03-14 9:24 ` 2.5.64-mm6: oops in elv_remove_request Jeremy Fitzhardinge
2003-03-14 10:42 ` Jens Axboe
2003-03-14 10:06 ` Jeremy Fitzhardinge
2003-03-14 10:31 ` Jeremy Fitzhardinge
2003-03-14 11:37 ` Jens Axboe
2003-03-14 17:59 ` Jeremy Fitzhardinge [this message]
2003-03-14 18:07 ` Jens Axboe
2003-03-14 22:19 ` Jeremy Fitzhardinge
2003-03-15 8:15 ` Jens Axboe
2003-03-16 2:54 ` Jeremy Fitzhardinge
2003-03-17 8:05 ` Jens Axboe
2003-03-17 16:56 ` Jeremy Fitzhardinge
2003-03-24 13:14 ` Jens Axboe
2003-03-14 20:33 ` Jens Axboe
2003-03-14 22:15 ` Jeremy Fitzhardinge
2003-03-15 8:15 ` Jens Axboe
2003-03-13 20:52 ` 2.5.64-mm6: kernel BUG at kernel/timer.c:155! Aravind
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1047664774.25536.47.camel@ixodes.goop.org \
--to=jeremy@goop.org \
--cc=akpm@digeo.com \
--cc=axboe@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox