From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263320AbTDWJWO (ORCPT ); Wed, 23 Apr 2003 05:22:14 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263338AbTDWJWO (ORCPT ); Wed, 23 Apr 2003 05:22:14 -0400 Received: from pointblue.com.pl ([62.89.73.6]:28166 "EHLO pointblue.com.pl") by vger.kernel.org with ESMTP id S263320AbTDWJWM (ORCPT ); Wed, 23 Apr 2003 05:22:12 -0400 Subject: Re: emu10k1 hang with dlink-520+ or acx100 network card From: Grzegorz Jaskiewicz To: Linux Kernel Mailing List In-Reply-To: <1051021625.858.1.camel@flat41> References: <1051020930.566.2.camel@flat41> <1051021625.858.1.camel@flat41> Content-Type: text/plain Organization: K4 Labs Message-Id: <1051090439.9095.3.camel@gregs> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.2.4 Date: 23 Apr 2003 10:34:09 +0100 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Tue, 2003-04-22 at 15:27, Grzegorz Jaskiewicz wrote: > Just after i placed my new dlink-520+ card and boot it, kernel hangs > after emu10k1 initialization. loading it as a module solves problem (it > does not hang while loading), but it hangs if i will do cat /dev/urandom > >/dev/sound/dsp with "Spurious 8259A interrupt: IRQ 7". This happends > both on 2.5.68 and 2.4.21-rc1. > > lspci -vvv and .config included. Any chance to get any response from you guys ? -- Grzegorz Jaskiewicz K4 Labs