From: Paul Fulghum <paulkf@microgate.com>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "torvalds@transmeta.com" <torvalds@transmeta.com>
Subject: [PATCH] 2.5.73 synclink_cs.c
Date: 23 Jun 2003 08:56:04 -0500 [thread overview]
Message-ID: <1056376563.2089.4.camel@diemos> (raw)
Fix arbitration between net open and tty open.
Cleanup missed bits of CUA device removal changes.
Please apply.
--
Paul Fulghum, paulkf@microgate.com
Microgate Corporation, http://www.microgate.com
--- linux-2.5.72/drivers/char/pcmcia/synclink_cs.c 2003-06-16 08:42:24.000000000 -0500
+++ linux-2.5.72-mg/drivers/char/pcmcia/synclink_cs.c 2003-06-18 10:31:08.000000000 -0500
@@ -1,7 +1,7 @@
/*
* linux/drivers/char/pcmcia/synclink_cs.c
*
- * $Id: synclink_cs.c,v 4.10 2003/05/13 16:06:03 paulkf Exp $
+ * $Id: synclink_cs.c,v 4.13 2003/06/18 15:29:32 paulkf Exp $
*
* Device driver for Microgate SyncLink PC Card
* multiprotocol serial adapter.
@@ -467,7 +467,6 @@
* assigned major number. May be forced as module parameter.
*/
static int ttymajor=0;
-static int cuamajor=0;
static int debug_level = 0;
static int maxframe[MAX_DEVICE_COUNT] = {0,};
@@ -485,7 +484,6 @@
MODULE_PARM(break_on_load,"i");
MODULE_PARM(ttymajor,"i");
-MODULE_PARM(cuamajor,"i");
MODULE_PARM(debug_level,"i");
MODULE_PARM(maxframe,"1-" __MODULE_STRING(MAX_DEVICE_COUNT) "i");
MODULE_PARM(dosyncppp,"1-" __MODULE_STRING(MAX_DEVICE_COUNT) "i");
@@ -493,7 +491,7 @@
MODULE_LICENSE("GPL");
static char *driver_name = "SyncLink PC Card driver";
-static char *driver_version = "$Revision: 4.10 $";
+static char *driver_version = "$Revision: 4.13 $";
static struct tty_driver *serial_driver;
@@ -1290,7 +1288,7 @@
(info->serial_signals & SerialSignal_DCD) ? "on" : "off");
if (info->serial_signals & SerialSignal_DCD)
wake_up_interruptible(&info->open_wait);
- else if (!(info->flags & ASYNC_CALLOUT_NOHUP)) {
+ else {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("doing serial hangup...");
if (info->tty)
@@ -2538,14 +2536,17 @@
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- if (!info || mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
+ if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
__FILE__,__LINE__, info->device_name, info->count);
- if (!info->count || tty_hung_up_p(filp))
+ if (!info->count)
+ return;
+
+ if (tty_hung_up_p(filp))
goto cleanup;
if ((tty->count == 1) && (info->count != 1)) {
@@ -2822,16 +2823,11 @@
info = mgslpc_device_list;
while(info && info->line != line)
info = info->next_device;
- if ( !info ){
- printk("%s(%d):Can't find specified device on open (line=%d)\n",
- __FILE__,__LINE__,line);
+ if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
return -ENODEV;
- }
tty->driver_data = info;
info->tty = tty;
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
- return -ENODEV;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
@@ -2879,6 +2875,8 @@
cleanup:
if (retval) {
+ if (tty->count == 1)
+ info->tty = 0; /* tty layer will release tty struct */
if(info->count)
info->count--;
}
--
Paul Fulghum, paulkf@microgate.com
Microgate Corporation, http://www.microgate.com
reply other threads:[~2003-06-23 13:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1056376563.2089.4.camel@diemos \
--to=paulkf@microgate.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox