From: Roberto Orenstein <rstein@brturbo.com>
To: Con Kolivas <kernel@kolivas.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] O1int for 2.5.73 - sched tuning sysctl
Date: 27 Jun 2003 21:20:05 -0300 [thread overview]
Message-ID: <1056759599.1308.45.camel@dexter.lan> (raw)
In-Reply-To: <200306271826.23690.kernel@kolivas.org>
[-- Attachment #1: Type: text/plain, Size: 1236 bytes --]
On Fri, 2003-06-27 at 05:26, Con Kolivas wrote:
> Here is an updated version of the O1int patch designed to improve
> interactivity.
>
> This change addresses the difficulty of new tasks in heavy load being
> recognised as interactive by decreasing the amount of time considered in the
> interactivity equation, but dropping that decrease exponentially till it gets
> to the MAX_SLEEP_AVG.
>
> This should improve the startup time of new apps in heavy load and lessen
> audio stalls when loads are high _and_ then the audio app is started.
>
> Please test and comment.
>
> Con
Well, I've just been following this thread and I choose to make a small
patch against your O1 int to export the scheduler tuning knobs via
sysctl. This patch will create /proc/sys/kernel/sched_tuning and expose
all the knobs, sou you guys don't have to recompile and reboot just to
change, say, max_sleep_avg. Don't know if anybody will find it useful,
but at least it doesn't hurts :-)
It should apply cleanly against plain 2.5.73, altough I didn't tested.
wrt your patch, I must admit I didn't feel any difference from vanilla
2.5.73, but this feeling isn't much scientific 8). I will do some
serious tests tomorrow if I find any time.
Roberto
[-- Attachment #2: patch-sched_tuning --]
[-- Type: text/x-patch, Size: 6217 bytes --]
diff -Nur -X dontdiff linux-2.5.73-O1int/include/linux/sysctl.h linux-2.5.73-test/include/linux/sysctl.h
--- linux-2.5.73-O1int/include/linux/sysctl.h 2003-06-27 19:35:11.000000000 -0300
+++ linux-2.5.73-test/include/linux/sysctl.h 2003-06-27 20:45:59.000000000 -0300
@@ -130,6 +130,7 @@
KERN_PIDMAX=55, /* int: PID # limit */
KERN_CORE_PATTERN=56, /* string: pattern for core-file names */
KERN_PANIC_ON_OOPS=57, /* int: whether we will panic on an oops */
+ KERN_SCHED_TUNING=58 /* dir: scheduler tuning */
};
@@ -193,6 +194,21 @@
RANDOM_UUID=6
};
+/* /proc/sys/kernel/sched_tuning */
+enum
+{
+ SCHED_TUNING_MIN_TIMESLICE=1,
+ SCHED_TUNING_MAX_TIMESLICE=2,
+ SCHED_TUNING_BONUS_RATIO=3,
+ SCHED_TUNING_MAX_SLEEP_AVG=4,
+ SCHED_TUNING_STARVATION_LIMIT=5,
+ SCHED_TUNING_CHILD_PENALTY=6,
+ SCHED_TUNING_PARENT_PENALTY=7,
+ SCHED_TUNING_EXIT_WEIGHT=8,
+ SCHED_TUNING_INTERACTIVE_DELTA=9,
+ SCHED_TUNING_NODE_THRESHOLD=10
+};
+
/* /proc/sys/bus/isa */
enum
{
diff -Nur -X dontdiff linux-2.5.73-O1int/kernel/sched.c linux-2.5.73-test/kernel/sched.c
--- linux-2.5.73-O1int/kernel/sched.c 2003-06-27 19:57:56.000000000 -0300
+++ linux-2.5.73-test/kernel/sched.c 2003-06-27 20:45:59.000000000 -0300
@@ -65,16 +65,28 @@
* maximum timeslice is 200 msecs. Timeslices get refilled after
* they expire.
*/
-#define MIN_TIMESLICE ( 10 * HZ / 1000)
-#define MAX_TIMESLICE (200 * HZ / 1000)
-#define CHILD_PENALTY 50
-#define PARENT_PENALTY 100
-#define EXIT_WEIGHT 3
-#define PRIO_BONUS_RATIO 25
-#define INTERACTIVE_DELTA 2
-#define MAX_SLEEP_AVG (10*HZ)
-#define STARVATION_LIMIT (10*HZ)
-#define NODE_THRESHOLD 125
+int sched_min_timeslice = ( 10 * HZ / 1000);
+int sched_max_timeslice = (200 * HZ / 1000);
+int sched_prio_bonus_ratio = 25;
+int sched_max_sleep_avg = (10*HZ);
+int sched_starvation_limit = (10*HZ);
+int sched_child_penalty = 50;
+int sched_parent_penalty = 100;
+int sched_exit_weight = 3;
+int sched_interactive_delta = 2;
+int sched_node_threshold = 125;
+
+
+#define MIN_TIMESLICE sched_min_timeslice
+#define MAX_TIMESLICE sched_max_timeslice
+#define CHILD_PENALTY sched_child_penalty
+#define PARENT_PENALTY sched_parent_penalty
+#define EXIT_WEIGHT sched_exit_weight
+#define PRIO_BONUS_RATIO sched_prio_bonus_ratio
+#define INTERACTIVE_DELTA sched_interactive_delta
+#define MAX_SLEEP_AVG sched_max_sleep_avg
+#define STARVATION_LIMIT sched_starvation_limit
+#define NODE_THRESHOLD sched_node_threshold
/*
* If a task is 'interactive' then we reinsert it in the active
diff -Nur -X dontdiff linux-2.5.73-O1int/kernel/sysctl.c linux-2.5.73-test/kernel/sysctl.c
--- linux-2.5.73-O1int/kernel/sysctl.c 2003-06-27 19:38:13.000000000 -0300
+++ linux-2.5.73-test/kernel/sysctl.c 2003-06-27 20:45:59.000000000 -0300
@@ -58,6 +58,17 @@
extern int pid_max;
extern int sysctl_lower_zone_protection;
extern int min_free_kbytes;
+/* sched.c */
+extern int sched_min_timeslice;
+extern int sched_max_timeslice;
+extern int sched_prio_bonus_ratio;
+extern int sched_max_sleep_avg;
+extern int sched_starvation_limit;
+extern int sched_child_penalty;
+extern int sched_parent_penalty;
+extern int sched_exit_weight;
+extern int sched_interactive_delta;
+extern int sched_node_threshold;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
@@ -123,6 +134,7 @@
static ctl_table debug_table[];
static ctl_table dev_table[];
extern ctl_table random_table[];
+static ctl_table sched_tuning_table[];
/* /proc declarations: */
@@ -551,6 +563,12 @@
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = KERN_SCHED_TUNING,
+ .procname = "sched_tuning",
+ .mode = 0555,
+ .child = sched_tuning_table
+ },
{ .ctl_name = 0 }
};
@@ -775,6 +793,100 @@
static ctl_table dev_table[] = {
{ .ctl_name = 0 }
+};
+
+/* sched tuning */
+static ctl_table sched_tuning_table[] = {
+ /* min_timeslice */
+ {
+ .ctl_name = SCHED_TUNING_MIN_TIMESLICE,
+ .procname = "min_timeslice",
+ .mode = 0644,
+ .data = &sched_min_timeslice,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /*max_timeslice */
+ {
+ .ctl_name = SCHED_TUNING_MAX_TIMESLICE,
+ .procname = "max_timeslice",
+ .mode = 0644,
+ .data = &sched_max_timeslice,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* prio_bonus_ratio */
+ {
+ .ctl_name = SCHED_TUNING_BONUS_RATIO,
+ .procname = "prio_bonus_ratio",
+ .mode = 0644,
+ .data = &sched_prio_bonus_ratio,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* max_sleep_avg */
+ {
+ .ctl_name = SCHED_TUNING_MAX_SLEEP_AVG,
+ .procname = "max_sleep_avg",
+ .mode = 0644,
+ .data = &sched_max_sleep_avg,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* starvation_limit */
+ {
+ .ctl_name = SCHED_TUNING_STARVATION_LIMIT,
+ .procname = "starvation_limit",
+ .mode = 0644,
+ .data = &sched_starvation_limit,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* child_penalty */
+ {
+ .ctl_name = SCHED_TUNING_CHILD_PENALTY,
+ .procname = "child_penalty",
+ .mode = 0644,
+ .data = &sched_child_penalty,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* parent_penalty */
+ {
+ .ctl_name = SCHED_TUNING_PARENT_PENALTY,
+ .procname = "parent_penalty",
+ .mode = 0644,
+ .data = &sched_parent_penalty,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* exit_weight */
+ {
+ .ctl_name = SCHED_TUNING_EXIT_WEIGHT,
+ .procname = "exit_weight",
+ .mode = 0644,
+ .data = &sched_exit_weight,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* interactive_delta */
+ {
+ .ctl_name = SCHED_TUNING_INTERACTIVE_DELTA,
+ .procname = "interactive_delta",
+ .mode = 0644,
+ .data = &sched_interactive_delta,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ },
+ /* node_threshold */
+ {
+ .ctl_name = SCHED_TUNING_NODE_THRESHOLD,
+ .procname = "node_threshold",
+ .mode = 0644,
+ .data = &sched_node_threshold,
+ .maxlen = sizeof(int),
+ .proc_handler = &proc_dointvec,
+ }
};
extern void init_irq_proc (void);
prev parent reply other threads:[~2003-06-28 2:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-27 8:26 [PATCH] O1int for 2.5.73 Con Kolivas
2003-06-28 0:20 ` Roberto Orenstein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1056759599.1308.45.camel@dexter.lan \
--to=rstein@brturbo.com \
--cc=kernel@kolivas.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox