From: "Ramón Rey Vicente" <ramon.rey@hispalinux.es>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [v2.6.0-test2] hda: dma_timer_expiry: dma status == 0x60
Date: 29 Jul 2003 15:50:16 +0200 [thread overview]
Message-ID: <1059486614.12370.8.camel@debian> (raw)
[-- Attachment #1: Type: text/plain, Size: 4422 bytes --]
Hi
Using hdparm with this options
hdparm -k1 -d1 -u1 -c1 -a8 -m16 -X udma2 /dev/hda
I obtain this
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: channel busy
hda: dma_timer_expiry: dma status == 0x60
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
hdb: DMA disabled
hda: no DRQ after issuing MULTWRITE
ide0: reset: success
blk: queue c02fb11c, I/O limit 4095Mb (mask 0xffffffff)
hda: CHECK for good STATUS
Some information of my system
Linux debian 2.6.0-test2 #2 Sun Jul 27 21:18:34 CEST 2003 i586 GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.11
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded r128 snd_seq_midi snd_seq_oss snd_seq_midi_event
snd_seq snd_pcm_oss snd_mixer_oss snd_ens1371 snd_rawmidi snd_seq_device
snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd ipt_REDIRECT
iptable_nat ipt_state ip_conntrack iptable_filter ip_tables uhci_hcd
usbcore 8139too mii crc32 ide_cd cdrom
And my hardware
cat /proc/via:
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
Highest DMA rate: UDMA33
BM-DMA base: 0xe000
PCI clock: 33.3MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA PIO DMA UDMA
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 60ns 120ns 120ns 60ns
Transfer Rate: 33.3MB/s 16.6MB/s 16.6MB/s 33.3MB/s
Processor
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 8
model name : AMD-K6(tm) 3D processor
stepping : 12
cpu MHz : 451.191
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow
k6_mtrr
bogomips : 888.83
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
4000-40ff : VIA Technologies, In VT82C586B ACPI
d000-dfff : PCI Bus #01
d000-d0ff : ATI Technologies Inc Rage 128 PF/PRO AGP
e000-e00f : VIA Technologies, In VT82C586/B/686A/B PI
e000-e007 : ide0
e008-e00f : ide1
e400-e41f : VIA Technologies, In USB
e400-e41f : uhci-hcd
e800-e8ff : Realtek Semiconducto RTL-8139/8139C/8139C
e800-e8ff : 8139too
ec00-ec3f : Ensoniq ES1371 [AudioPCI-97]
ec00-ec3f : Ensoniq AudioPCI
--
Ramón Rey Vicente <ramon dot rey at hispalinux dot es>
jabber ID <rreylinux at jabber dot org>
------------------------------------------------------------
gpg public key ID 0xBEBD71D5 # http://pgp.escomposlinux.org/
[-- Attachment #2: Esta parte del mensaje está firmada digitalmente --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2003-07-29 13:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1059486614.12370.8.camel@debian \
--to=ramon.rey@hispalinux.es \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox