* [PATCH][2.6.0-test2]adm1021 i2c driver bug fix
@ 2003-08-06 20:17 Rusty Lynch
0 siblings, 0 replies; only message in thread
From: Rusty Lynch @ 2003-08-06 20:17 UTC (permalink / raw)
To: Philip Edelbrock, Frodo Looijaard; +Cc: lkml
While initializing the adm1021 device, the driver is performing a conversion
from fixed point to Celcius on values that were declaired as Celcius. On
my Dell Precision 220 this results in a shutdown after a couple of minutes
running.
This patch was made against the 2.6.0-test2 tree, and just removes the
conversion.
--rustyl
--- drivers/i2c/chips/adm1021.c.orig 2003-08-06 13:04:25.000000000 -0700
+++ drivers/i2c/chips/adm1021.c 2003-08-06 13:09:43.000000000 -0700
@@ -356,13 +356,13 @@
{
/* Initialize the adm1021 chip */
adm1021_write_value(client, ADM1021_REG_TOS_W,
- TEMP_TO_REG(adm1021_INIT_TOS));
+ adm1021_INIT_TOS);
adm1021_write_value(client, ADM1021_REG_THYST_W,
- TEMP_TO_REG(adm1021_INIT_THYST));
+ adm1021_INIT_THYST);
adm1021_write_value(client, ADM1021_REG_REMOTE_TOS_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_TOS));
+ adm1021_INIT_REMOTE_TOS);
adm1021_write_value(client, ADM1021_REG_REMOTE_THYST_W,
- TEMP_TO_REG(adm1021_INIT_REMOTE_THYST));
+ adm1021_INIT_REMOTE_THYST);
/* Enable ADC and disable suspend mode */
adm1021_write_value(client, ADM1021_REG_CONFIG_W, 0);
/* Set Conversion rate to 1/sec (this can be tinkered with) */
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-08-06 20:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-08-06 20:17 [PATCH][2.6.0-test2]adm1021 i2c driver bug fix Rusty Lynch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox