From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] More PCI fixes for 2.6.0-test2
Date: Fri, 8 Aug 2003 17:32:13 -0700 [thread overview]
Message-ID: <10603891331781@kroah.com> (raw)
In-Reply-To: <20030809003036.GA3163@kroah.com>
ChangeSet 1.1119.1.1, 2003/08/06 15:41:22-07:00, greg@kroah.com
[PATCH] PCI: remove all struct device.name usage from the PCI core code.
This is because that field is going away shortly...
drivers/pci/names.c | 2 +-
drivers/pci/probe.c | 9 +++------
drivers/pci/proc.c | 7 ++++++-
drivers/pci/quirks.c | 2 +-
drivers/pci/setup-bus.c | 2 +-
drivers/pci/setup-res.c | 2 +-
include/linux/pci.h | 3 +++
7 files changed, 16 insertions(+), 11 deletions(-)
diff -Nru a/drivers/pci/names.c b/drivers/pci/names.c
--- a/drivers/pci/names.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/names.c Fri Aug 8 17:25:15 2003
@@ -56,7 +56,7 @@
{
const struct pci_vendor_info *vendor_p = pci_vendor_list;
int i = VENDORS;
- char *name = dev->dev.name;
+ char *name = dev->pretty_name;
do {
if (vendor_p->vendor == dev->vendor)
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
--- a/drivers/pci/probe.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/probe.c Fri Aug 8 17:25:15 2003
@@ -69,7 +69,7 @@
for(pos=0; pos<howmany; pos = next) {
next = pos+1;
res = &dev->resource[pos];
- res->name = dev->dev.name;
+ res->name = pci_name(dev);
reg = PCI_BASE_ADDRESS_0 + (pos << 2);
pci_read_config_dword(dev, reg, &l);
pci_write_config_dword(dev, reg, ~0);
@@ -120,7 +120,7 @@
if (rom) {
dev->rom_base_reg = rom;
res = &dev->resource[PCI_ROM_RESOURCE];
- res->name = dev->dev.name;
+ res->name = pci_name(dev);
pci_read_config_dword(dev, rom, &l);
pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
pci_read_config_dword(dev, rom, &sz);
@@ -153,7 +153,7 @@
return;
if (dev->transparent) {
- printk("Transparent bridge - %s\n", dev->dev.name);
+ printk("Transparent bridge - %s\n", pci_name(dev));
for(i = 0; i < PCI_BUS_NUM_RESOURCES; i++)
child->resource[i] = child->parent->resource[i];
return;
@@ -406,8 +406,6 @@
dev->slot_name = dev->dev.bus_id;
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- sprintf(dev->dev.name, "PCI device %04x:%04x",
- dev->vendor, dev->device);
INIT_LIST_HEAD(&dev->pools);
@@ -663,7 +661,6 @@
memset(b->dev,0,sizeof(*(b->dev)));
b->dev->parent = parent;
sprintf(b->dev->bus_id,"pci%04x:%02x", pci_domain_nr(b), bus);
- strcpy(b->dev->name,"Host/PCI Bridge");
device_register(b->dev);
b->number = b->secondary = bus;
diff -Nru a/drivers/pci/proc.c b/drivers/pci/proc.c
--- a/drivers/pci/proc.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/proc.c Fri Aug 8 17:25:15 2003
@@ -483,7 +483,12 @@
seq_printf(m, " %s", class);
else
seq_printf(m, " Class %04x", class_rev >> 16);
- seq_printf(m, ": %s (rev %d).\n", dev->dev.name, class_rev & 0xff);
+#ifdef CONFIG_PCI_NAMES
+ seq_printf(m, ": %s", dev->pretty_name);
+#else
+ seq_printf(m, ": PCI device %04x:%04x", dev->vendor, dev->device);
+#endif
+ seq_printf(m, " (rev %d).\n", class_rev & 0xff);
if (dev->irq)
seq_printf(m, " IRQ %d.\n", dev->irq);
diff -Nru a/drivers/pci/quirks.c b/drivers/pci/quirks.c
--- a/drivers/pci/quirks.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/quirks.c Fri Aug 8 17:25:15 2003
@@ -219,7 +219,7 @@
if (region) {
struct resource *res = dev->resource + nr;
- res->name = dev->dev.name;
+ res->name = pci_name(dev);
res->start = region;
res->end = region + size - 1;
res->flags = IORESOURCE_IO;
diff -Nru a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
--- a/drivers/pci/setup-bus.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/setup-bus.c Fri Aug 8 17:25:15 2003
@@ -141,7 +141,7 @@
u32 l;
DBGC((KERN_INFO "PCI: Bus %d, bridge: %s\n",
- bus->number, bridge->dev.name));
+ bus->number, pci_name(bridge)));
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pcibios_resource_to_bus(bridge, ®ion, bus->resource[0]);
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
--- a/drivers/pci/setup-res.c Fri Aug 8 17:25:15 2003
+++ b/drivers/pci/setup-res.c Fri Aug 8 17:25:15 2003
@@ -166,7 +166,7 @@
if (!r_align) {
printk(KERN_WARNING "PCI: Ignore bogus resource %d "
"[%lx:%lx] of %s\n",
- i, r->start, r->end, dev->dev.name);
+ i, r->start, r->end, pci_name(dev));
continue;
}
r_align = (i < PCI_BRIDGE_RESOURCES) ? r_align + 1 : r->start;
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h Fri Aug 8 17:25:15 2003
+++ b/include/linux/pci.h Fri Aug 8 17:25:15 2003
@@ -419,6 +419,9 @@
/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */
unsigned int multifunction:1;/* Part of multi-function device */
+#ifdef CONFIG_PCI_NAMES
+ char pretty_name[DEVICE_NAME_SIZE]; /* pretty name for users to see */
+#endif
};
#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
next prev parent reply other threads:[~2003-08-09 0:36 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-09 0:30 [BK PATCH] More PCI fixes for 2.6.0-test2 Greg KH
2003-08-09 0:32 ` Greg KH [this message]
2003-08-09 0:32 ` [PATCH] " Greg KH
2003-08-09 0:32 ` Greg KH
2003-08-09 0:32 ` Greg KH
2003-08-09 8:15 ` [BK PATCH] " Russell King
2003-08-09 17:07 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10603891331781@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox