From: "Ramón Rey Vicente" <ramon.rey@hispalinux.es>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Subject: Re: [2.6.0-test9-mm2] Error trying to read a cdrom disc
Date: Tue, 11 Nov 2003 19:24:43 +0100 [thread overview]
Message-ID: <1068575082.1450.7.camel@debian> (raw)
In-Reply-To: <1068574968.1450.6.camel@debian>
[-- Attachment #1.1: Type: text/plain, Size: 227 bytes --]
Sorry, the info about my ide controller
--
Ramón Rey Vicente <ramon dot rey at hispalinux dot es>
jabber ID <rreylinux at jabber dot org>
GPG public key ID 0xBEBD71D5 -> http://pgp.escomposlinux.org/
[-- Attachment #1.2: via_controller_info --]
[-- Type: text/plain, Size: 1476 bytes --]
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.38
South Bridge: VIA vt82c586b
Revision: ISA 0x47 IDE 0x6
Highest DMA rate: UDMA33
BM-DMA base: 0xe000
PCI clock: 33.3MHz
Master Read Cycle IRDY: 1ws
Master Write Cycle IRDY: 1ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes yes
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 40w 40w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA PIO DMA
Address Setup: 30ns 30ns 30ns 30ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 90ns
Data Recovery: 30ns 30ns 30ns 30ns
Cycle Time: 60ns 60ns 120ns 120ns
Transfer Rate: 33.3MB/s 33.3MB/s 16.6MB/s 16.6MB/s
[-- Attachment #2: Esta parte del mensaje está firmada digitalmente --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
prev parent reply other threads:[~2003-11-11 18:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-11 18:22 [2.6.0-test9-mm2] Error trying to read a cdrom disc Ramón Rey Vicente
2003-11-11 18:24 ` Ramón Rey Vicente [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1068575082.1450.7.camel@debian \
--to=ramon.rey@hispalinux.es \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox