From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI fixes for 2.6.4-rc1
Date: Fri, 27 Feb 2004 16:09:43 -0800 [thread overview]
Message-ID: <10779269834095@kroah.com> (raw)
In-Reply-To: <10779269831109@kroah.com>
ChangeSet 1.1617, 2004/02/24 11:08:29-08:00, dlsy@snoqualmie.dp.intel.com
[PATCH] PCI Hotplug: Patch to get polling mode in SHPC hot-plug driver properly working
Here is the patch to get polling mode in SHPC hot-plug properly
working.
drivers/pci/hotplug/pciehp_ctrl.c | 2 +
drivers/pci/hotplug/shpchp.h | 4 +--
drivers/pci/hotplug/shpchp_ctrl.c | 2 +
drivers/pci/hotplug/shpchp_hpc.c | 49 ++++++++++++++++++++++----------------
4 files changed, 35 insertions(+), 22 deletions(-)
diff -Nru a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
--- a/drivers/pci/hotplug/pciehp_ctrl.c Fri Feb 27 15:57:17 2004
+++ b/drivers/pci/hotplug/pciehp_ctrl.c Fri Feb 27 15:57:17 2004
@@ -188,11 +188,13 @@
/*
* Card Present
*/
+ info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
+ info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_OFF;
}
diff -Nru a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
--- a/drivers/pci/hotplug/shpchp.h Fri Feb 27 15:57:17 2004
+++ b/drivers/pci/hotplug/shpchp.h Fri Feb 27 15:57:17 2004
@@ -390,8 +390,8 @@
/* Sleep for up to 1 second */
schedule_timeout(1*HZ);
} else {
- /* Sleep for up to 1.5 second */
- schedule_timeout(1.5*HZ);
+ /* Sleep for up to 2 seconds */
+ schedule_timeout(2*HZ);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&ctrl->queue, &wait);
diff -Nru a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
--- a/drivers/pci/hotplug/shpchp_ctrl.c Fri Feb 27 15:57:17 2004
+++ b/drivers/pci/hotplug/shpchp_ctrl.c Fri Feb 27 15:57:17 2004
@@ -192,11 +192,13 @@
/*
* Card Present
*/
+ info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
+ info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
taskInfo->event_type = INT_PRESENCE_OFF;
}
diff -Nru a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
--- a/drivers/pci/hotplug/shpchp_hpc.c Fri Feb 27 15:57:17 2004
+++ b/drivers/pci/hotplug/shpchp_hpc.c Fri Feb 27 15:57:17 2004
@@ -1071,9 +1071,14 @@
if (!shpchp_poll_mode) {
ctrl = (struct controller *)dev_id;
php_ctlr = ctrl->hpc_ctlr_handle;
- } else
+ } else {
php_ctlr = (struct php_ctlr_state_s *) dev_id;
+ ctrl = (struct controller *)php_ctlr->callback_instance_id;
+ }
+ if (!ctrl)
+ return IRQ_NONE;
+
if (!php_ctlr || !php_ctlr->creg)
return IRQ_NONE;
@@ -1085,18 +1090,20 @@
dbg("%s: shpc_isr proceeds\n", __FUNCTION__);
dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
- /* Mask Global Interrupt Mask - see implementation note on p. 139 */
- /* of SHPC spec rev 1.0*/
- temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: Before masking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
- temp_dword |= 0x00000001;
- dbg("%s: After masking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
- writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ if(!shpchp_poll_mode) {
+ /* Mask Global Interrupt Mask - see implementation note on p. 139 */
+ /* of SHPC spec rev 1.0*/
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: Before masking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword |= 0x00000001;
+ dbg("%s: After masking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
- intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
- dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
+ dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ }
if (intr_loc & 0x0001) {
/*
@@ -1159,14 +1166,16 @@
dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
}
}
- /* Unmask Global Interrupt Mask */
- temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
- dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
- temp_dword &= 0xfffffffe;
- dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n",
- __FUNCTION__, temp_dword);
- writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ if (!shpchp_poll_mode) {
+ /* Unmask Global Interrupt Mask */
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword &= 0xfffffffe;
+ dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ }
return IRQ_HANDLED;
}
next prev parent reply other threads:[~2004-02-28 0:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-28 0:07 [BK PATCH] PCI fixes for 2.6.4-rc1 Greg KH
2004-02-28 0:09 ` [PATCH] " Greg KH
2004-02-28 0:09 ` Greg KH
2004-02-28 0:09 ` Greg KH
2004-02-28 0:09 ` Greg KH
2004-02-28 0:09 ` Greg KH [this message]
2004-02-28 0:09 ` Greg KH
2004-02-28 0:09 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10779269834095@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox