Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
       [not found] <A6974D8E5F98D511BB910002A50A6647615F4B99@hdsmsx402.hd.intel.com>
@ 2004-03-11  6:50 ` Len Brown
  2004-03-11 13:38   ` Richard Browning
  2004-03-11 18:19   ` Richard Browning
  0 siblings, 2 replies; 30+ messages in thread
From: Len Brown @ 2004-03-11  6:50 UTC (permalink / raw)
  To: Richard Browning; +Cc: linux-kernel

On Wed, 2004-03-10 at 07:27, Richard Browning wrote:

> When operating from the 
> command line it is usual to see a Machine Check Exception error
> immediately prior to system failure.

details?



^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-11  6:50 ` SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze Len Brown
@ 2004-03-11 13:38   ` Richard Browning
  2004-03-11 18:19   ` Richard Browning
  1 sibling, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-11 13:38 UTC (permalink / raw)
  To: Len Brown; +Cc: linux-kernel

On Thursday 11 March 2004 06:50, Len Brown wrote:
> On Wed, 2004-03-10 at 07:27, Richard Browning wrote:
> > When operating from the
> > command line it is usual to see a Machine Check Exception error
> > immediately prior to system failure.
>
> details?

CPU 2: Machine Check Exception: 000...0004
CPU 3: Machine Check Exception: 000...0004

Is what I get now. Previously I also got "Kernel Context Corrupt" in addition 
to the above.

The MCE error can be made to appear when, for example, I'm running a 
configure/compile cycle. I thought it might be a SATA issue so installed 
Mandrake on an IDE drive but I got the same error.

As an aside, I'm running Gentoo with CFLAGS=-O2 -march=pentium4 -pipe ... I 
was running CFLAGS=-O3 -march=pentium3 -mcpu=pentium4 -mmmx -ssse2 (and so 
on) with no difference whatsoever (probably shouldn't be a surprise bearing 
in mind the kernel is compiled with its own flags).

I've run MEMTEST with no errors reported. It's a very interesting problem, 
since with SMP only everything works okay. But SMP+Hyperthreading and, sooner 
rather than later, the thing will bomb.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-11  6:50 ` SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze Len Brown
  2004-03-11 13:38   ` Richard Browning
@ 2004-03-11 18:19   ` Richard Browning
  2004-03-11 22:17     ` Zwane Mwaikambo
  1 sibling, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-11 18:19 UTC (permalink / raw)
  To: Len Brown; +Cc: linux-kernel, Zwane Mwaikambo

On Thursday 11 March 2004 06:50, Len Brown wrote:
> On Wed, 2004-03-10 at 07:27, Richard Browning wrote:
> > When operating from the
> > command line it is usual to see a Machine Check Exception error
> > immediately prior to system failure.
>
> details?

I've now updated the BIOS to the latest version available on Asus' site. The 
crash occurs even earlier - during bootup this time. Exactly:

CPU2: Machine Check Exception: 000.0004
CPU3: Machine Check Exception: 000.0004
Bank 0: a20000008c010400Bank0: a20000008c010400
Kernel Panic: CPU context corrupt
In idle task - not syncing

Again, disabling hyperthreading allows the system to operate normally.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-11 18:19   ` Richard Browning
@ 2004-03-11 22:17     ` Zwane Mwaikambo
  2004-03-12  0:22       ` Richard Browning
  0 siblings, 1 reply; 30+ messages in thread
From: Zwane Mwaikambo @ 2004-03-11 22:17 UTC (permalink / raw)
  To: Richard Browning; +Cc: Len Brown, linux-kernel

On Thu, 11 Mar 2004, Richard Browning wrote:

> I've now updated the BIOS to the latest version available on Asus' site. The
> crash occurs even earlier - during bootup this time. Exactly:
>
> CPU2: Machine Check Exception: 000.0004
> CPU3: Machine Check Exception: 000.0004
> Bank 0: a20000008c010400Bank0: a20000008c010400
> Kernel Panic: CPU context corrupt
> In idle task - not syncing
>
> Again, disabling hyperthreading allows the system to operate normally.

For my own curiosity, does switching the processors around do anything?
Those MCEs look confined to the non bootstrap processor package.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-11 22:17     ` Zwane Mwaikambo
@ 2004-03-12  0:22       ` Richard Browning
  2004-03-12  0:36         ` Zwane Mwaikambo
  0 siblings, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-12  0:22 UTC (permalink / raw)
  To: Zwane Mwaikambo; +Cc: Len Brown, linux-kernel

On Thursday 11 March 2004 22:17, Zwane Mwaikambo wrote:
> On Thu, 11 Mar 2004, Richard Browning wrote:
> > I've now updated the BIOS to the latest version available on Asus' site.
> > The crash occurs even earlier - during bootup this time. Exactly:
> >
> > CPU2: Machine Check Exception: 000.0004
> > CPU3: Machine Check Exception: 000.0004
> > Bank 0: a20000008c010400Bank0: a20000008c010400
> > Kernel Panic: CPU context corrupt
> > In idle task - not syncing
> >
> > Again, disabling hyperthreading allows the system to operate normally.
>
> For my own curiosity, does switching the processors around do anything?
> Those MCEs look confined to the non bootstrap processor package.

Switched CPUs. This time I get the following:

CPU3: Machine Check Exception: 000.0004
CPU2: Machine Check Exception: 000.0004
Bank 0: a20000008c010400
Kernel Panic: CPU context corrupt
In idle task - not syncing

Note that the CPU# designations are swapped and that there's only one Bank 0: 
message. Is this significant?

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  0:22       ` Richard Browning
@ 2004-03-12  0:36         ` Zwane Mwaikambo
  2004-03-12  0:42           ` Richard Browning
  2004-03-12  1:16           ` Richard Browning
  0 siblings, 2 replies; 30+ messages in thread
From: Zwane Mwaikambo @ 2004-03-12  0:36 UTC (permalink / raw)
  To: Richard Browning; +Cc: Len Brown, linux-kernel

On Fri, 12 Mar 2004, Richard Browning wrote:

> > For my own curiosity, does switching the processors around do anything?
> > Those MCEs look confined to the non bootstrap processor package.
>
> Switched CPUs. This time I get the following:
>
> CPU3: Machine Check Exception: 000.0004
> CPU2: Machine Check Exception: 000.0004
> Bank 0: a20000008c010400
> Kernel Panic: CPU context corrupt
> In idle task - not syncing
>
> Note that the CPU# designations are swapped and that there's only one Bank 0:
> message. Is this significant?

Ok, but that's still on the same package so it's not moving with the
processor, thanks. Could you also supply processor info from
/proc/cpuinfo.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  0:36         ` Zwane Mwaikambo
@ 2004-03-12  0:42           ` Richard Browning
  2004-03-12  6:27             ` Len Brown
  2004-03-12  1:16           ` Richard Browning
  1 sibling, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-12  0:42 UTC (permalink / raw)
  To: Zwane Mwaikambo; +Cc: Len Brown, linux-kernel

On Friday 12 March 2004 00:36, Zwane Mwaikambo wrote:
> On Fri, 12 Mar 2004, Richard Browning wrote:
> > > For my own curiosity, does switching the processors around do anything?
> > > Those MCEs look confined to the non bootstrap processor package.
> >
> > Switched CPUs. This time I get the following:
> >
> > CPU3: Machine Check Exception: 000.0004
> > CPU2: Machine Check Exception: 000.0004
> > Bank 0: a20000008c010400
> > Kernel Panic: CPU context corrupt
> > In idle task - not syncing
> >
> > Note that the CPU# designations are swapped and that there's only one
> > Bank 0: message. Is this significant?
>
> Ok, but that's still on the same package so it's not moving with the
> processor, thanks. Could you also supply processor info from
> /proc/cpuinfo.

I suppose that's good (for me); indicates no hardware error?

/proc/cpuinfo of course:

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2807.537
cache size      : 512 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5537.79

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2807.537
cache size      : 512 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5603.32

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  0:42           ` Richard Browning
@ 2004-03-12  6:27             ` Len Brown
  2004-03-12  7:07               ` Len Brown
  0 siblings, 1 reply; 30+ messages in thread
From: Len Brown @ 2004-03-12  6:27 UTC (permalink / raw)
  To: Richard Browning; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Thu, 2004-03-11 at 19:42, Richard Browning wrote:
> On Friday 12 March 2004 00:36, Zwane Mwaikambo wrote:
> > On Fri, 12 Mar 2004, Richard Browning wrote:
> > > > For my own curiosity, does switching the processors around do anything?
> > > > Those MCEs look confined to the non bootstrap processor package.
> > >
> > > Switched CPUs. This time I get the following:
> > >
> > > CPU3: Machine Check Exception: 000.0004
> > > CPU2: Machine Check Exception: 000.0004
> > > Bank 0: a20000008c010400
> > > Kernel Panic: CPU context corrupt
> > > In idle task - not syncing
> > >
> > > Note that the CPU# designations are swapped and that there's only one
> > > Bank 0: message. Is this significant?
> >
> > Ok, but that's still on the same package so it's not moving with the
> > processor, thanks. Could you also supply processor info from
> > /proc/cpuinfo.
> 
> I suppose that's good (for me); indicates no hardware error?

MCE == hardware error.
In this case un-recoverable.

I'll take a swing at decoding this, call the Coast Guard if I don't
return in 30 minutes;-)

http://developer.intel.com/design/pentium4/manuals/25366813.pdf

> Machine Check Exception: 000.0004

fig 14-4 says this means that indeed, you have a valid MCE.

> Bank 0: a20000008c010400

fig 14-6 says:
63: valid register contents
61: UC -- processor did not correct the error
57: PCC -- Processor context corrupt (you're dead)

0400 is the MCA error code

fig E2 says
10 - internal watchdog timeout.
26,27 -- TT -- Thread timeout indicator -- both threads timed out

> /proc/cpuinfo of course:
> 
> processor       : 0
> vendor_id       : GenuineIntel
> cpu family      : 15
> model           : 2

I have no idea what causes this error, but it sure sounds specific to
the processor, and specific to HT -- which matches your experiments. 
I'd imagine that after you verify that you've got the latest BIOS for
the board and the error persists that you should look into getting that
specific processor replaced.

cheers,
-Len




^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  6:27             ` Len Brown
@ 2004-03-12  7:07               ` Len Brown
  2004-03-12  8:24                 ` Richard Browning
                                   ` (2 more replies)
  0 siblings, 3 replies; 30+ messages in thread
From: Len Brown @ 2004-03-12  7:07 UTC (permalink / raw)
  To: Richard Browning; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

Hmm, read that note too fast...
Since the failure did not follow the package to the BSP socket
(CPU0/CPU1), but instead stayed with the AP (CPU2/CPU3) socket, that
suggests an issue with the MB rather than the processor itself.

-Len

On Fri, 2004-03-12 at 01:27, Len Brown wrote:
> On Thu, 2004-03-11 at 19:42, Richard Browning wrote:
> > On Friday 12 March 2004 00:36, Zwane Mwaikambo wrote:
> > > On Fri, 12 Mar 2004, Richard Browning wrote:
> > > > > For my own curiosity, does switching the processors around do anything?
> > > > > Those MCEs look confined to the non bootstrap processor package.
> > > >
> > > > Switched CPUs. This time I get the following:
> > > >
> > > > CPU3: Machine Check Exception: 000.0004
> > > > CPU2: Machine Check Exception: 000.0004
> > > > Bank 0: a20000008c010400
> > > > Kernel Panic: CPU context corrupt
> > > > In idle task - not syncing
> > > >
> > > > Note that the CPU# designations are swapped and that there's only one
> > > > Bank 0: message. Is this significant?
> > >
> > > Ok, but that's still on the same package so it's not moving with the
> > > processor, thanks. Could you also supply processor info from
> > > /proc/cpuinfo.
> > 
> > I suppose that's good (for me); indicates no hardware error?
> 
> MCE == hardware error.
> In this case un-recoverable.
> 
> I'll take a swing at decoding this, call the Coast Guard if I don't
> return in 30 minutes;-)
> 
> http://developer.intel.com/design/pentium4/manuals/25366813.pdf
> 
> > Machine Check Exception: 000.0004
> 
> fig 14-4 says this means that indeed, you have a valid MCE.
> 
> > Bank 0: a20000008c010400
> 
> fig 14-6 says:
> 63: valid register contents
> 61: UC -- processor did not correct the error
> 57: PCC -- Processor context corrupt (you're dead)
> 
> 0400 is the MCA error code
> 
> fig E2 says
> 10 - internal watchdog timeout.
> 26,27 -- TT -- Thread timeout indicator -- both threads timed out
> 
> > /proc/cpuinfo of course:
> > 
> > processor       : 0
> > vendor_id       : GenuineIntel
> > cpu family      : 15
> > model           : 2
> 
> I have no idea what causes this error, but it sure sounds specific to
> the processor, and specific to HT -- which matches your experiments. 
> I'd imagine that after you verify that you've got the latest BIOS for
> the board and the error persists that you should look into getting that
> specific processor replaced.
> 
> cheers,
> -Len
> 
> 


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  7:07               ` Len Brown
@ 2004-03-12  8:24                 ` Richard Browning
  2004-03-18  3:01                 ` Richard Browning
  2004-03-20 14:33                 ` ANYONE? " Richard Browning
  2 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-12  8:24 UTC (permalink / raw)
  To: Len Brown; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Friday 12 March 2004 07:07, Len Brown wrote:
> Hmm, read that note too fast...
> Since the failure did not follow the package to the BSP socket
> (CPU0/CPU1), but instead stayed with the AP (CPU2/CPU3) socket, that
> suggests an issue with the MB rather than the processor itself.

But how is it possible that simply activating HT could cause this error? Is it 
not the BIOS/processor that determines HT support ... it operates correctly 
in SMP mode. Hm.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  7:07               ` Len Brown
  2004-03-12  8:24                 ` Richard Browning
@ 2004-03-18  3:01                 ` Richard Browning
  2004-03-20 14:33                 ` ANYONE? " Richard Browning
  2 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-18  3:01 UTC (permalink / raw)
  To: Len Brown; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Friday 12 March 2004 07:07, Len Brown wrote:
> Hmm, read that note too fast...
> Since the failure did not follow the package to the BSP socket
> (CPU0/CPU1), but instead stayed with the AP (CPU2/CPU3) socket, that
> suggests an issue with the MB rather than the processor itself.

Right then. I've just 'borrowed' the same motherboard (Asus PC-DL Deluxe) and 
CPUs from the local friendly computer place. I simply connected the hard 
drive to their combo and booted. SAME RESULT.

To confirm these (SEVERE) issues, I installed (deep breath, apologies, etc,) 
Windows XP Pro. Regrettably, the Micro$oft beast worked perfectly. Four 
processors in task manager, no hangs after several hours of 'doing stuff'.

I don't know what's going on with Linux and this motherboard. Is it the 
strangeness of Asus putting a Canterwood and Intel ICH5 chipset together to 
get the 533 FSB out of the Xeon?

The symptoms only show up if I'm doing 'dev'. In other words, I can boot into 
KDE, play music, watch DVDs and even play Enemy Territory - all with HT 
enabled. However AS SOON as I begin the configure/make/install cycle the 
system will hang. It's almost like an interrupt is gumming up the works 
somehow, but I lack the expertise to pinpoint it. For the record, I'm running 
a Radeon9800Pro graphics card.

I dunno why there haven't been more issues like this. Then again, most of the 
folk I hear on the Asus forums are using these mobos with Windoze.

What can I do to help you chaps get to the bottom of this? (Interestingly I 
note that turning off ACPI - not APIC - with HT enabled causes the kernel to 
not realise that HT is in fact enabled. I though the kernel used CPUIDs to 
work out whether HT was enabled?)

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  7:07               ` Len Brown
  2004-03-12  8:24                 ` Richard Browning
  2004-03-18  3:01                 ` Richard Browning
@ 2004-03-20 14:33                 ` Richard Browning
  2004-03-20 17:26                   ` Richard Browning
  2004-03-21 14:46                   ` Richard B. Johnson
  2 siblings, 2 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-20 14:33 UTC (permalink / raw)
  To: Len Brown; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

Gents

Is there anyone in kernelland who is tackling this? I'm currently in the 
throes of recompiling everything with -march=pentium3 -O2 to see if these 
simple flags make a difference (as I reiterate, Windoze XP works without 
problem). I refuse to believe that I will have to use XP in order to get my 
money's worth. I've always thought anything Doze can do, GNU/Linux does 
better!

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-20 14:33                 ` ANYONE? " Richard Browning
@ 2004-03-20 17:26                   ` Richard Browning
  2004-03-20 21:30                     ` Zwane Mwaikambo
  2004-03-21  3:33                     ` Horst von Brand
  2004-03-21 14:46                   ` Richard B. Johnson
  1 sibling, 2 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-20 17:26 UTC (permalink / raw)
  To: Len Brown; +Cc: Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Saturday 20 March 2004 14:33, Richard Browning wrote:
> Is there anyone in kernelland who is tackling this? I'm currently in the
> throes of recompiling everything with -march=pentium3 -O2 to see if these
> simple flags make a difference (as I reiterate, Windoze XP works without
> problem). I refuse to believe that I will have to use XP in order to get my
> money's worth. I've always thought anything Doze can do, GNU/Linux does
> better!

It's been pointed out to me that this Doze-vs-Linux comparison won't help. If 
you're offended by it, please don't be. I've been a supporter and contributer 
to the GNU cause for the last six years and I'm not going to stop. However 
this is the first serious issue that I've come across re: the kernel and 
incompatible hardware and I would like to see it fixed. Like I've said, I 
want to help pinpoint the problem - but no-one's asking.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-20 17:26                   ` Richard Browning
@ 2004-03-20 21:30                     ` Zwane Mwaikambo
  2004-03-21  3:41                       ` Richard Browning
  2004-03-21  3:33                     ` Horst von Brand
  1 sibling, 1 reply; 30+ messages in thread
From: Zwane Mwaikambo @ 2004-03-20 21:30 UTC (permalink / raw)
  To: Richard Browning; +Cc: Len Brown, linux-kernel, Venkatesh Pallipadi

[-- Attachment #1: Type: TEXT/PLAIN, Size: 732 bytes --]

On Sat, 20 Mar 2004, Richard Browning wrote:

> It's been pointed out to me that this Doze-vs-Linux comparison won't help. If
> you're offended by it, please don't be. I've been a supporter and contributer
> to the GNU cause for the last six years and I'm not going to stop. However
> this is the first serious issue that I've come across re: the kernel and
> incompatible hardware and I would like to see it fixed. Like I've said, I
> want to help pinpoint the problem - but no-one's asking.

It's good that you've verified that the hardware should work fine, could
you please try the attached configuration. I'll also check errata,
but i'm pretty sure there isn't anything flagged for this problem. But
i'll double check.

Thanks

[-- Attachment #2: Type: TEXT/PLAIN, Size: 36954 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_STANDALONE=y
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
# CONFIG_X86_4G is not set
# CONFIG_X86_SWITCH_PAGETABLES is not set
# CONFIG_X86_4G_VM_LAYOUT is not set
# CONFIG_X86_UACCESS_INDIRECT is not set
# CONFIG_X86_HIGH_ENTRY is not set
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_USE_VECTOR is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_YENTA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_SERIAL=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=y
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=y
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_E100_NAPI is not set
# CONFIG_LNE390 is not set
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_8139_RXBUF_IDX=2
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_PCMCIA_AXNET=m

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
CONFIG_AMD7XX_TCO=y
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
CONFIG_IBM_ASM=y

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
CONFIG_SND_OPL3SA2=m
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=y
CONFIG_MIDI_VIA82CXXX=y
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set

#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE is not set

#
# USB Human Interface Devices (HID)
#
# CONFIG_USB_HID is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_OV511=m
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_W9968CF is not set

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_DEBUG=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_TIGL=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
CONFIG_XFS_RT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=y
CONFIG_QNX4FS_RW=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_SPINLINE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_LOCKMETER is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_KGDB is not set
CONFIG_FRAME_POINTER=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SELINUX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-20 21:30                     ` Zwane Mwaikambo
@ 2004-03-21  3:41                       ` Richard Browning
  0 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-21  3:41 UTC (permalink / raw)
  To: Zwane Mwaikambo; +Cc: Len Brown, linux-kernel, Venkatesh Pallipadi

On Saturday 20 March 2004 21:30, Zwane Mwaikambo wrote:
> On Sat, 20 Mar 2004, Richard Browning wrote:
> > It's been pointed out to me that this Doze-vs-Linux comparison won't
> > help. If you're offended by it, please don't be. I've been a supporter
> > and contributer to the GNU cause for the last six years and I'm not going
> > to stop. However this is the first serious issue that I've come across
> > re: the kernel and incompatible hardware and I would like to see it
> > fixed. Like I've said, I want to help pinpoint the problem - but no-one's
> > asking.
>
> It's good that you've verified that the hardware should work fine, could
> you please try the attached configuration. I'll also check errata,
> but i'm pretty sure there isn't anything flagged for this problem. But
> i'll double check.

I'll try this config in the morning - off to bed now (4am).

Thanks!

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-20 17:26                   ` Richard Browning
  2004-03-20 21:30                     ` Zwane Mwaikambo
@ 2004-03-21  3:33                     ` Horst von Brand
  2004-03-21 20:32                       ` Richard Browning
  1 sibling, 1 reply; 30+ messages in thread
From: Horst von Brand @ 2004-03-21  3:33 UTC (permalink / raw)
  To: Richard Browning
  Cc: Len Brown, Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

Richard Browning <richard@redline.org.uk> said:
> On Saturday 20 March 2004 14:33, Richard Browning wrote:
> > Is there anyone in kernelland who is tackling this? I'm currently in the
> > throes of recompiling everything with -march=pentium3 -O2 to see if these
> > simple flags make a difference (as I reiterate, Windoze XP works without
> > problem). I refuse to believe that I will have to use XP in order to get my
> > money's worth. I've always thought anything Doze can do, GNU/Linux does
> > better!

> It's been pointed out to me that this Doze-vs-Linux comparison won't
> help. If you're offended by it, please don't be. I've been a supporter
> and contributer to the GNU cause for the last six years and I'm not going
> to stop. However this is the first serious issue that I've come across
> re: the kernel and incompatible hardware and I would like to see it
> fixed. Like I've said, I want to help pinpoint the problem - but no-one's
> asking.

In my experience, when Linux crashes, Windows works fine it is flaky
hardware. Has variously been overclocking, bad fans (CPU overheating), bad
RAM. You have to rule all that out first. Might need a BIOS update...
-- 
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                     Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria              +56 32 654239
Casilla 110-V, Valparaiso, Chile                Fax:  +56 32 797513

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-21  3:33                     ` Horst von Brand
@ 2004-03-21 20:32                       ` Richard Browning
  2004-03-21 23:33                         ` Denis Vlasenko
  0 siblings, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-21 20:32 UTC (permalink / raw)
  To: Horst von Brand
  Cc: Len Brown, Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Sunday 21 March 2004 03:33, Horst von Brand wrote:
> In my experience, when Linux crashes, Windows works fine it is flaky
> hardware. Has variously been overclocking, bad fans (CPU overheating), bad
> RAM. You have to rule all that out first. Might need a BIOS update...

Done all that. Changed motherboards, changed CPUs, changed RAM. Haven't 
changed graphics card, though. I don't know where else to get a Radeon9800Pro 
from on loan! I don't overclock either. I'm confident it's not the hardware.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-21 20:32                       ` Richard Browning
@ 2004-03-21 23:33                         ` Denis Vlasenko
  2004-03-22  1:04                           ` Richard Browning
  0 siblings, 1 reply; 30+ messages in thread
From: Denis Vlasenko @ 2004-03-21 23:33 UTC (permalink / raw)
  To: Richard Browning, Horst von Brand
  Cc: Len Brown, Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Sunday 21 March 2004 22:32, Richard Browning wrote:
> On Sunday 21 March 2004 03:33, Horst von Brand wrote:
> > In my experience, when Linux crashes, Windows works fine it is flaky
> > hardware. Has variously been overclocking, bad fans (CPU overheating),
> > bad RAM. You have to rule all that out first. Might need a BIOS update...
>
> Done all that. Changed motherboards, changed CPUs, changed RAM. Haven't
> changed graphics card, though. I don't know where else to get a
> Radeon9800Pro from on loan! I don't overclock either. I'm confident it's
> not the hardware.

But it must be SOMETHING, right?

Kernel compile is too broad. Can you try to narrow it down?
Does burnCPU trigger it? Several burnCPUs?
dd if=/dev/hda of=/dev/null?
dd if=/dev/zero of=file bs=1M count=128?
network flood? (/me uses netcat and UDP)
Combination of above?

Then, you will be able to call for testing.
You can post your kernel version and .config
and ask folks who has identical hardware to try
to duplicate.
--
vda


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-21 23:33                         ` Denis Vlasenko
@ 2004-03-22  1:04                           ` Richard Browning
  2004-03-22  7:25                             ` Guennadi Liakhovetski
  0 siblings, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-22  1:04 UTC (permalink / raw)
  To: Denis Vlasenko
  Cc: Horst von Brand, Len Brown, Zwane Mwaikambo, linux-kernel,
	Venkatesh Pallipadi

On Sunday 21 March 2004 23:33, Denis Vlasenko wrote:
> But it must be SOMETHING, right?

I haven't been completely idle :)

> Kernel compile is too broad. Can you try to narrow it down?
> Does burnCPU trigger it? Several burnCPUs?
> dd if=/dev/hda of=/dev/null?
> dd if=/dev/zero of=file bs=1M count=128?
> network flood? (/me uses netcat and UDP)
> Combination of above?

As I suggested in the original post, the problem can be triggered simply by 
executing ./configure - the kernel corrupts when gcc does its thing. I can 
boot into KDE, run Enemy Territory, execute a Java compile, and so on. But 
the thing absolutely and most definitely able to upset the cart is to execute 
gcc.

Oh, I've even recompiled libgcc etc using a variety of optimisation flags 
(Gentoo is my distro), from the sooper-over-the-top P4 flags down to simple 
-O2 -march=pentium3. With no effect.

> Then, you will be able to call for testing.

Because I have exhausted my own meagre talents in the search for the cause (eg 
swapping hardware, altering config parameters, using different hard drives, 
etc) I felt the time was right to 'call in the experts'.

> You can post your kernel version and .config

I've done that, too, oddly enough. The config, cpuinfo, pci, the works. It's 
all there in the original thread.

> and ask folks who has identical hardware to try
> to duplicate.

The nearest I've got is someone who has the same mobo but with different CPUs, 
no AGP graphics card and no SATA.

Like I said, as a software engineer of some 20 years (heavens! I had my first 
game published when I was 14, lovingly handcrafted in 65c102 assember), I am 
aware of the steps required to pinpoint an issue. The penultimate one - the 
last, of course, is to give up - is to enlist the help of others who know 
more. That is what I've done.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-22  1:04                           ` Richard Browning
@ 2004-03-22  7:25                             ` Guennadi Liakhovetski
  2004-03-24  4:01                               ` Richard Browning
  0 siblings, 1 reply; 30+ messages in thread
From: Guennadi Liakhovetski @ 2004-03-22  7:25 UTC (permalink / raw)
  To: Richard Browning
  Cc: Denis Vlasenko, Horst von Brand, Len Brown, Zwane Mwaikambo,
	linux-kernel, Venkatesh Pallipadi

On Mon, 22 Mar 2004, Richard Browning wrote:

> As I suggested in the original post, the problem can be triggered simply by
> executing ./configure - the kernel corrupts when gcc does its thing. I can
> boot into KDE, run Enemy Territory, execute a Java compile, and so on. But
> the thing absolutely and most definitely able to upset the cart is to execute
> gcc.

Aha! A single thread? A specific asm insn? Is gcc --version enough to kill
the machine? Or on smth like
int main(void)
{return 0;}
gcc -E; gcc -S; gcc -c; ld? Step-by-step with gdb (hopefully, gdb doesn't
have this insn...). NMI watchdog?

Guennadi
---
Guennadi Liakhovetski



^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-22  7:25                             ` Guennadi Liakhovetski
@ 2004-03-24  4:01                               ` Richard Browning
  2004-03-24  7:15                                 ` Guennadi Liakhovetski
  0 siblings, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-24  4:01 UTC (permalink / raw)
  To: Guennadi Liakhovetski
  Cc: Denis Vlasenko, Horst von Brand, Len Brown, Zwane Mwaikambo,
	linux-kernel, Venkatesh Pallipadi

On Monday 22 March 2004 07:25, Guennadi Liakhovetski wrote:
> Aha! A single thread? A specific asm insn? Is gcc --version enough to kill
> the machine? Or on smth like
> int main(void)
> {return 0;}
> gcc -E; gcc -S; gcc -c; ld? Step-by-step with gdb (hopefully, gdb doesn't
> have this insn...). NMI watchdog?

gcc -version is fine. A compile will cause the problem.

It should be noted that whilst a ./configure cycle is *guaranteed* to initiate 
the MCE, the MCE can occur on other (seemingly random) occasions.

This of course smacks of hardware failure, but not only are the components new 
I have also swapped them all (excluding graphics card.) And, don't forget, 
simple dual 'SMP' mode works fine too.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-24  4:01                               ` Richard Browning
@ 2004-03-24  7:15                                 ` Guennadi Liakhovetski
       [not found]                                   ` <1080214330.982.10.camel@sven>
  0 siblings, 1 reply; 30+ messages in thread
From: Guennadi Liakhovetski @ 2004-03-24  7:15 UTC (permalink / raw)
  To: Richard Browning
  Cc: Denis Vlasenko, Horst von Brand, Len Brown, Zwane Mwaikambo,
	linux-kernel, Venkatesh Pallipadi

On Wed, 24 Mar 2004, Richard Browning wrote:

> On Monday 22 March 2004 07:25, Guennadi Liakhovetski wrote:
> > Aha! A single thread? A specific asm insn? Is gcc --version enough to kill
> > the machine? Or on smth like
> > int main(void)
> > {return 0;}
> > gcc -E; gcc -S; gcc -c; ld? Step-by-step with gdb (hopefully, gdb doesn't
> > have this insn...). NMI watchdog?
>
> gcc -version is fine. A compile will cause the problem.
>
> It should be noted that whilst a ./configure cycle is *guaranteed* to initiate
> the MCE, the MCE can occur on other (seemingly random) occasions.

Sorry, I should have been more explicit. I had 0 time (writing before
going to work, like now). So, what I really wanted to ask is the
following:

1) does gcc (compile) always cause an MCE?
2) If yes, can you try to narrow it down by
	a) running separately different gcc stages on a trivial C-program,
	like the one above (preprocessor with gcc -E, produce assembly
	output with gcc -S, compile without linking with gcc -c, link with
	ld)
	b) once you've figured out which stage causes it, try to further
	narrow it down by running this stage under gdb. Since you
	re-compiled gcc yourself, you should have the sources at hand, and
	should be able set up a couple of break-points to narrow it down
	gradually, eventually coming to a single assembly instruction - if
	my suspicion is right.

> This of course smacks of hardware failure, but not only are the components new
> I have also swapped them all (excluding graphics card.) And, don't forget,
> simple dual 'SMP' mode works fine too.

I know. You can compile with the Java compiler, but not with gcc. Can you
explain, why? I cannot.

Thanks
Guennadi
---
Guennadi Liakhovetski



^ permalink raw reply	[flat|nested] 30+ messages in thread

[parent not found: <1080214330.982.10.camel@sven>]

[parent not found: <200403251304.56877.richard@redline.org.uk>]

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
       [not found]                                     ` <200403251304.56877.richard@redline.org.uk>
@ 2004-03-25 22:47                                       ` Sven Dowideit
  2004-03-26  0:36                                         ` Richard Browning
  0 siblings, 1 reply; 30+ messages in thread
From: Sven Dowideit @ 2004-03-25 22:47 UTC (permalink / raw)
  To: Richard Browning
  Cc: Guennadi Liakhovetski, Denis Vlasenko, Horst von Brand, Len Brown,
	Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

[-- Attachment #1: Type: text/plain, Size: 735 bytes --]

same as you - dual 2.8G Xeon - though my crash seems to be happening
both with and without HT :(

sven

On Fri, 2004-03-26 at 00:04, Richard Browning wrote:
> > just to mess you up a bit :)
> >
> > I've just gotten one of these boxen for work
> >
> > and running win2003 its nice and stable,
> >
> > EXCEPT
> >
> > when i play quake, when i locks up hard after some random amount of
> > time. Also, if I use the ATI driver setup to rotate the screen by
> > 90degrees, it resets instantly.
> >
> > so i'm wondering if there's not an issue with the radeon 9600pro and
> > this mobo..
> >
> > i'm goint to wack a matrox card into it in the next few days just to see
> 
> Which processors - is HT enabled?
> 
> R

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-25 22:47                                       ` Sven Dowideit
@ 2004-03-26  0:36                                         ` Richard Browning
  0 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-26  0:36 UTC (permalink / raw)
  To: svenud
  Cc: Guennadi Liakhovetski, Denis Vlasenko, Horst von Brand, Len Brown,
	Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Thursday 25 March 2004 22:47, Sven Dowideit wrote:
> same as you - dual 2.8G Xeon - though my crash seems to be happening
> both with and without HT :(

I'm busy with a deadline at the mo' but I'll stick in a GeForce over t'weekend 
and see owt it goes.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-20 14:33                 ` ANYONE? " Richard Browning
  2004-03-20 17:26                   ` Richard Browning
@ 2004-03-21 14:46                   ` Richard B. Johnson
  2004-03-21 14:57                     ` Richard Browning
  1 sibling, 1 reply; 30+ messages in thread
From: Richard B. Johnson @ 2004-03-21 14:46 UTC (permalink / raw)
  To: Richard Browning
  Cc: Len Brown, Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Sat, 20 Mar 2004, Richard Browning wrote:

> Gents
>
> Is there anyone in kernelland who is tackling this? I'm currently in the
> throes of recompiling everything with -march=pentium3 -O2 to see if these
> simple flags make a difference (as I reiterate, Windoze XP works without
> problem). I refuse to believe that I will have to use XP in order to get my
> money's worth. I've always thought anything Doze can do, GNU/Linux does
> better!

I have been using 2.4.24 with SMP and hyperthreading with no
problems. FYI, the reference to Windows is useless, because
M$ was unable to make any SMP stuff function without crashes
since windows 2000/professional, later Windows versions don't
use your additional CPUs at all, they just report that they
exist. FYI, see if you can find your CPU resources at all
in XP!!!  They just don't want you to know!


Cheers,
Dick Johnson
Penguin : Linux version 2.4.24 on an i686 machine (797.90 BogoMips).
            Note 96.31% of all statistics are fiction.



^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: ANYONE? Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-21 14:46                   ` Richard B. Johnson
@ 2004-03-21 14:57                     ` Richard Browning
  0 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-21 14:57 UTC (permalink / raw)
  To: root; +Cc: Len Brown, Zwane Mwaikambo, linux-kernel, Venkatesh Pallipadi

On Sunday 21 March 2004 14:46, Richard B. Johnson wrote:
> I have been using 2.4.24 with SMP and hyperthreading with no
> problems. FYI, the reference to Windows is useless, because
> M$ was unable to make any SMP stuff function without crashes
> since windows 2000/professional, later Windows versions don't
> use your additional CPUs at all, they just report that they
> exist. FYI, see if you can find your CPU resources at all
> in XP!!!  They just don't want you to know!

Er, sorry old man, but WindozeXPPro certainly does use the extra processors 
with HT. I'm not talking about Task Manager (which of course shows four 
processors) but the multi-threaded secure gateway application I'm developing 
confirms the multiple (and virtual) processors.

In fact, Windoze2kPro has a different threading kernel to WIndozeXPPro, which 
is why you get four procs in XPPro and only two in 2kPro. Anyway, this isn't 
the thread or forum for this topic. I don't use Doze for anything other than 
compatibility testing so it's a (fairly) moot point. I'm only interested in 
improving Linux (since I develop on and for it) and if this investigation 
helps, then marvellous.

Cheers

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-12  0:36         ` Zwane Mwaikambo
  2004-03-12  0:42           ` Richard Browning
@ 2004-03-12  1:16           ` Richard Browning
  1 sibling, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-12  1:16 UTC (permalink / raw)
  To: Zwane Mwaikambo; +Cc: Len Brown, linux-kernel

Maybe it's worthwhile pointing out that this Asus mobo achieves the unusual 
Xeon 533MHz front side bus speed by combining the Intel875 Northbridge with 
the Canterwood chipset. Dunno if that's significant.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

* SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
@ 2004-03-10 12:27 Richard Browning
  2004-03-10 16:10 ` Zwane Mwaikambo
  0 siblings, 1 reply; 30+ messages in thread
From: Richard Browning @ 2004-03-10 12:27 UTC (permalink / raw)
  To: linux-kernel

**** SUMMARY
Enabling hyperthreading on Asus PCDL Deluxe motherboard w/ 2xP4Xeon causes 
system freeze in short order.

**** DESCRIPTION
I have an Asus PCDL Deluxe P4Xeon motherboard which has a north/southbridge 
combination allowing system memory to run at 533MHz . The motherboard has the 
usual Asus onboard gigabit ethernet, AD1985 audio, Intel and Promise SATA 
controllers, firewire. All are enabled and operate. I am running dual 2.8GHz 
P4 Xeons.

When hyperthreading is disabled the system is perfectly stable and usable. No 
operating artefacts seem to occur and SMP appears to workcorrectly.

However when hyperthreading is enabled, the system operates for a brief period 
(enough for KDE to boot, for example) before halting. When operating from the 
command line it is usual to see a Machine Check Exception error immediately 
prior to system failure.

**** KEYWORDS
SMP Hyperthreading Asus Xeon Freeze Crash

**** KERNELS
2.4.2x 2.6.x

**** OOPS
Not available

**** CATALYST
Enable hyperthreading

**** ENVIRONMENT
Asus PCDL Deluxe motherboard
(http://usa.asus.com/products/server/srv-mb/pc-dl/overview.HTM)

**** SOFTWARE
Gnu C                  3.3.2
Gnu make               3.80
util-linux             2.12
mount                  2.12
module-init-tools      0.9.15-pre4
e2fsprogs              1.34
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.15
Net-tools              1.60
Kbd                    1.08
Sh-utils               5.0.91
Modules Loaded         fglrx eeprom i2c_isa lm75 i2c_i801 i2c_algo_bit i2c_dev 
i2c_sensor i2c_core

**** PROCESSOR
NOTE Hyperthreading disabled
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2807.537
cache size      : 512 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5537.79

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 15
model           : 2
model name      : Intel(R) Xeon(TM) CPU 2.80GHz
stepping        : 7
cpu MHz         : 2807.537
cache size      : 512 KB
physical id     : 0
siblings        : 1
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips        : 5603.32

**** MODULES
fglrx 208932 7 - Live 0xe09d5000
eeprom 11656 0 - Live 0xe08c9000
i2c_isa 6144 0 - Live 0xe08b3000
lm75 11908 0 - Live 0xe08c0000
i2c_i801 12176 0 - Live 0xe089f000
i2c_algo_bit 13832 0 - Live 0xe08bb000
i2c_dev 14976 0 - Live 0xe08b6000
i2c_sensor 7168 2 eeprom,lm75, Live 0xe08a3000
i2c_core 27524 7 eeprom,i2c_isa,lm75,i2c_i801,i2c_algo_bit,i2c_dev,i2c_sensor, 
Live 0xe08a8000

**** DRIVER AND HARDWARE
(IOPORTS)
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : ide0
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0500-051f : 0000:00:1f.3
  0500-050f : i801-smbus
0cf8-0cff : PCI conf1
9000-9fff : PCI Bus #01
  9000-90ff : 0000:01:00.0
a000-afff : PCI Bus #02
  a000-a01f : 0000:02:01.0
    a000-a01f : e1000
b000-b01f : 0000:00:1d.0
  b000-b01f : uhci_hcd
b400-b41f : 0000:00:1d.1
  b400-b41f : uhci_hcd
b800-b81f : 0000:00:1d.2
  b800-b81f : uhci_hcd
bc00-bc1f : 0000:00:1d.3
  bc00-bc1f : uhci_hcd
d800-d8ff : 0000:00:1f.5
dc00-dc3f : 0000:00:1f.5
f000-f00f : 0000:00:1f.2
  f000-f00f : libata

(IOMEM)
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000d0000-000d0fff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
  00100000-0036a323 : Kernel code
  0036a324-00492e7f : Kernel data
1fff0000-1fff2fff : ACPI Non-volatile Storage
1fff3000-1fffffff : ACPI Tables
e0000000-e7ffffff : 0000:00:00.0
e8000000-f7ffffff : PCI Bus #01
  e8000000-efffffff : 0000:01:00.0
  f0000000-f7ffffff : 0000:01:00.1
f8000000-f9ffffff : PCI Bus #01
  f9000000-f900ffff : 0000:01:00.0
  f9010000-f901ffff : 0000:01:00.1
fa000000-fa0fffff : PCI Bus #02
  fa000000-fa01ffff : 0000:02:01.0
    fa000000-fa01ffff : e1000
fa100000-fa103fff : 0000:03:03.0
fa104000-fa1047ff : 0000:03:03.0
  fa104000-fa1047ff : ohci1394
fa200000-fa2003ff : 0000:00:1d.7
  fa200000-fa2003ff : ehci_hcd
fa201000-fa2011ff : 0000:00:1f.5
  fa201000-fa2011ff : Intel ICH5 - AC'97
fa202000-fa2020ff : 0000:00:1f.5
  fa202000-fa2020ff : Intel ICH5 - Controller
fec00000-ffffffff : reserved

**** PCI
(lspci not available; here output of cat /proc/bus/pci/devices)
0000    80862578        0       e0000008        00000000        00000000        
00000000        00000000        00000000        00000000     08000000        
00000000        00000000        00000000        00000000        00000000        
00000000        agpgart-intel
0008    80862579        0       00000000        00000000        00000000        
00000000        00000000        00000000        00000000     00000000        
00000000        00000000        00000000        00000000        00000000        
00000000
0018    8086257b        0       00000000        00000000        00000000        
00000000        00000000        00000000        00000000     00000000        
00000000        00000000        00000000        00000000        00000000        
00000000
00e8    808624d2        10      00000000        00000000        00000000        
00000000        0000b001        00000000        00000000     00000000        
00000000        00000000        00000000        00000020        00000000        
00000000        uhci_hcd
00e9    808624d4        13      00000000        00000000        00000000        
00000000        0000b401        00000000        00000000     00000000        
00000000        00000000        00000000        00000020        00000000        
00000000        uhci_hcd
00ea    808624d7        12      00000000        00000000        00000000        
00000000        0000b801        00000000        00000000     00000000        
00000000        00000000        00000000        00000020        00000000        
00000000        uhci_hcd
00eb    808624de        10      00000000        00000000        00000000        
00000000        0000bc01        00000000        00000000     00000000        
00000000        00000000        00000000        00000020        00000000        
00000000        uhci_hcd
00ef    808624dd        17      fa200000        00000000        00000000        
00000000        00000000        00000000        00000000     00000400        
00000000        00000000        00000000        00000000        00000000        
00000000        ehci_hcd
00f0    8086244e        0       00000000        00000000        00000000        
00000000        00000000        00000000        00000000     00000000        
00000000        00000000        00000000        00000000        00000000        
00000000
00f8    808624d0        0       00000000        00000000        00000000        
00000000        00000000        00000000        00000000     00000000        
00000000        00000000        00000000        00000000        00000000        
00000000
00fa    808624d1        12      00000000        00000000        00000000        
00000000        0000f001        00000000        00000000     00000000        
00000000        00000000        00000000        00000010        00000000        
00000000        ata_piix
00fb    808624d3        11      00000000        00000000        00000000        
00000000        00000501        00000000        00000000     00000000        
00000000        00000000        00000000        00000020        00000000        
00000000        i801 smbus
00fd    808624d5        11      0000d801        0000dc01        fa201000        
fa202000        00000000        00000000        00000000     00000100        
00000040        00000200        00000100        00000000        00000000        
00000000        Intel ICH
0100    10024e48        10      e8000008        00009001        f9000000        
00000000        00000000        00000000        00000000     08000000        
00000100        00010000        00000000        00000000        00000000        
00020000
0101    10024e68        0       f0000008        f9010000        00000000        
00000000        00000000        00000000        00000000     08000000        
00010000        00000000        00000000        00000000        00000000        
00000000
0208    80861019        12      fa000000        00000000        0000a001        
00000000        00000000        00000000        00000000     00020000        
00000000        00000020        00000000        00000000        00000000        
00000000        e1000
0318    104c8023        14      fa104000        fa100000        00000000        
00000000        00000000        00000000        00000000     00000800        
00004000        00000000        00000000        00000000        00000000        
00000000        ohci1394

**** SCSI
/proc/scsi/scsi not available

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-10 12:27 Richard Browning
@ 2004-03-10 16:10 ` Zwane Mwaikambo
  2004-03-11 13:04   ` Richard Browning
  0 siblings, 1 reply; 30+ messages in thread
From: Zwane Mwaikambo @ 2004-03-10 16:10 UTC (permalink / raw)
  To: Richard Browning; +Cc: linux-kernel

On Wed, 10 Mar 2004, Richard Browning wrote:

> **** SUMMARY
> Enabling hyperthreading on Asus PCDL Deluxe motherboard w/ 2xP4Xeon causes
> system freeze in short order.
>
> **** DESCRIPTION
> I have an Asus PCDL Deluxe P4Xeon motherboard which has a north/southbridge
> combination allowing system memory to run at 533MHz . The motherboard has the
> usual Asus onboard gigabit ethernet, AD1985 audio, Intel and Promise SATA
> controllers, firewire. All are enabled and operate. I am running dual 2.8GHz
> P4 Xeons.
>
> When hyperthreading is disabled the system is perfectly stable and usable. No
> operating artefacts seem to occur and SMP appears to workcorrectly.
>
> However when hyperthreading is enabled, the system operates for a brief period
> (enough for KDE to boot, for example) before halting. When operating from the
> command line it is usual to see a Machine Check Exception error immediately
> prior to system failure.
>
> **** ENVIRONMENT
> Asus PCDL Deluxe motherboard
> (http://usa.asus.com/products/server/srv-mb/pc-dl/overview.HTM)

Just to make sure, have you tried a bios upgrade?

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze
  2004-03-10 16:10 ` Zwane Mwaikambo
@ 2004-03-11 13:04   ` Richard Browning
  0 siblings, 0 replies; 30+ messages in thread
From: Richard Browning @ 2004-03-11 13:04 UTC (permalink / raw)
  To: Zwane Mwaikambo; +Cc: linux-kernel

On Wednesday 10 March 2004 16:10, Zwane Mwaikambo wrote:
> Just to make sure, have you tried a bios upgrade?

No, because the two BIOS upgrades available are minor boot-up UI 
modifications. I can do it though (<fx>purchases floppy drive</fx>) and I'll 
get back to you.

R

^ permalink raw reply	[flat|nested] 30+ messages in thread

end of thread, other threads:[~2004-03-26  0:57 UTC | newest]

Thread overview: 30+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <A6974D8E5F98D511BB910002A50A6647615F4B99@hdsmsx402.hd.intel.com>
2004-03-11  6:50 ` SMP + Hyperthreading / Asus PCDL Deluxe / Kernel 2.4.x 2.6.x / Crash/Freeze Len Brown
2004-03-11 13:38   ` Richard Browning
2004-03-11 18:19   ` Richard Browning
2004-03-11 22:17     ` Zwane Mwaikambo
2004-03-12  0:22       ` Richard Browning
2004-03-12  0:36         ` Zwane Mwaikambo
2004-03-12  0:42           ` Richard Browning
2004-03-12  6:27             ` Len Brown
2004-03-12  7:07               ` Len Brown
2004-03-12  8:24                 ` Richard Browning
2004-03-18  3:01                 ` Richard Browning
2004-03-20 14:33                 ` ANYONE? " Richard Browning
2004-03-20 17:26                   ` Richard Browning
2004-03-20 21:30                     ` Zwane Mwaikambo
2004-03-21  3:41                       ` Richard Browning
2004-03-21  3:33                     ` Horst von Brand
2004-03-21 20:32                       ` Richard Browning
2004-03-21 23:33                         ` Denis Vlasenko
2004-03-22  1:04                           ` Richard Browning
2004-03-22  7:25                             ` Guennadi Liakhovetski
2004-03-24  4:01                               ` Richard Browning
2004-03-24  7:15                                 ` Guennadi Liakhovetski
     [not found]                                   ` <1080214330.982.10.camel@sven>
     [not found]                                     ` <200403251304.56877.richard@redline.org.uk>
2004-03-25 22:47                                       ` Sven Dowideit
2004-03-26  0:36                                         ` Richard Browning
2004-03-21 14:46                   ` Richard B. Johnson
2004-03-21 14:57                     ` Richard Browning
2004-03-12  1:16           ` Richard Browning
2004-03-10 12:27 Richard Browning
2004-03-10 16:10 ` Zwane Mwaikambo
2004-03-11 13:04   ` Richard Browning

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox