From: Vojtech Pavlik <vojtech@suse.cz>
To: torvalds@osdl.org, vojtech@ucw.cz, linux-kernel@vger.kernel.org
Subject: [PATCH 23/44] Use __obsolete_setup() in input drivers to warn about obsolete kernel params
Date: Tue, 16 Mar 2004 15:19:37 +0100 [thread overview]
Message-ID: <10794467772648@twilight.ucw.cz> (raw)
In-Reply-To: <10794467773559@twilight.ucw.cz>
You can pull this changeset from:
bk://kernel.bkbits.net/vojtech/input
===================================================================
ChangeSet@1.1608.54.9, 2004-03-03 00:36:59-05:00, dtor_core@ameritech.net
Input: use __obsolete_setup to document removed (renamed)
options so users will have a clue why the options
do not work anymore
joystick/amijoy.c | 2 ++
joystick/analog.c | 2 ++
joystick/db9.c | 4 ++++
joystick/gamecon.c | 6 ++++++
joystick/turbografx.c | 4 ++++
keyboard/atkbd.c | 4 ++++
mouse/98busmouse.c | 2 ++
mouse/inport.c | 2 ++
mouse/logibm.c | 2 ++
mouse/psmouse-base.c | 6 ++++++
serio/i8042.c | 7 +++++++
11 files changed, 41 insertions(+)
===================================================================
diff -Nru a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
--- a/drivers/input/joystick/amijoy.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/joystick/amijoy.c Tue Mar 16 13:18:41 2004
@@ -50,6 +50,8 @@
module_param_array_named(map, amijoy, uint, amijoy_nargs, 0);
MODULE_PARM_DESC(map, "Map of attached joysticks in form of <a>,<b> (default is 0,1)");
+__obsolete_setup("amijoy=");
+
static int amijoy_used[2] = { 0, 0 };
static struct input_dev amijoy_dev[2];
static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" };
diff -Nru a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
--- a/drivers/input/joystick/analog.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/joystick/analog.c Tue Mar 16 13:18:41 2004
@@ -56,6 +56,8 @@
module_param_array_named(map, js, charp, js_nargs, 0);
MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities");
+__obsolete_setup("js=");
+
/*
* Times, feature definitions.
*/
diff -Nru a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
--- a/drivers/input/joystick/db9.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/joystick/db9.c Tue Mar 16 13:18:41 2004
@@ -58,6 +58,10 @@
module_param_array_named(dev3, db9_3, int, db9_nargs_3, 0);
MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
+__obsolete_setup("db9=");
+__obsolete_setup("db9_2=");
+__obsolete_setup("db9_3=");
+
#define DB9_MULTI_STICK 0x01
#define DB9_MULTI2_STICK 0x02
#define DB9_GENESIS_PAD 0x03
diff -Nru a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
--- a/drivers/input/joystick/gamecon.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/joystick/gamecon.c Tue Mar 16 13:18:41 2004
@@ -59,6 +59,10 @@
module_param_array_named(map3, gc_3, int, gc_nargs_3, 0);
MODULE_PARM_DESC(map3, "Describers third set of devices");
+__obsolete_setup("gc=");
+__obsolete_setup("gc_2=");
+__obsolete_setup("gc_3=");
+
/* see also gs_psx_delay parameter in PSX support section */
#define GC_SNES 1
@@ -243,6 +247,8 @@
static int gc_psx_delay = GC_PSX_DELAY;
module_param_named(psx_delay, gc_psx_delay, uint, 0);
MODULE_PARM_DESC(psx_delay, "Delay when accessing Sony PSX controller (usecs)");
+
+__obsolete_setup("gc_psx_delay=");
static short gc_psx_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_HAT0X, ABS_HAT0Y };
static short gc_psx_btn[] = { BTN_TL, BTN_TR, BTN_TL2, BTN_TR2, BTN_A, BTN_B, BTN_X, BTN_Y,
diff -Nru a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
--- a/drivers/input/joystick/turbografx.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/joystick/turbografx.c Tue Mar 16 13:18:41 2004
@@ -57,6 +57,10 @@
module_param_array_named(map3, tgfx_3, int, tgfx_nargs_3, 0);
MODULE_PARM_DESC(map3, "Describes third set of devices");
+__obsolete_setup("tgfx=");
+__obsolete_setup("tgfx_2=");
+__obsolete_setup("tgfx_3=");
+
#define TGFX_REFRESH_TIME HZ/100 /* 10 ms */
#define TGFX_TRIGGER 0x08
diff -Nru a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
--- a/drivers/input/keyboard/atkbd.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/keyboard/atkbd.c Tue Mar 16 13:18:41 2004
@@ -48,6 +48,10 @@
module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
+__obsolete_setup("atkbd_set=");
+__obsolete_setup("atkbd_reset");
+__obsolete_setup("atkbd_softrepeat=");
+
/*
* Scancode to keycode tables. These are just the default setting, and
* are loadable via an userland utility.
diff -Nru a/drivers/input/mouse/98busmouse.c b/drivers/input/mouse/98busmouse.c
--- a/drivers/input/mouse/98busmouse.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/mouse/98busmouse.c Tue Mar 16 13:18:41 2004
@@ -74,6 +74,8 @@
module_param_named(irq, pc98bm_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (13=default)");
+__obsolete_setup("pc98bm_irq=");
+
static int pc98bm_used = 0;
static irqreturn_t pc98bm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
diff -Nru a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
--- a/drivers/input/mouse/inport.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/mouse/inport.c Tue Mar 16 13:18:41 2004
@@ -85,6 +85,8 @@
module_param_named(irq, inport_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
+__obsolete_setup("inport_irq=");
+
static int inport_used;
static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
diff -Nru a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
--- a/drivers/input/mouse/logibm.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/mouse/logibm.c Tue Mar 16 13:18:41 2004
@@ -75,6 +75,8 @@
module_param_named(irq, logibm_irq, uint, 0);
MODULE_PARM_DESC(irq, "IRQ number (5=default)");
+__obsolete_setup("logibm_irq=");
+
static int logibm_used = 0;
static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
--- a/drivers/input/mouse/psmouse-base.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/mouse/psmouse-base.c Tue Mar 16 13:18:41 2004
@@ -47,6 +47,12 @@
module_param_named(resetafter, psmouse_resetafter, uint, 0);
MODULE_PARM_DESC(resetafter, "Reset Synaptics Touchpad after so many bad packets (0 = never).");
+__obsolete_setup("psmouse_noext");
+__obsolete_setup("psmouse_resolution=");
+__obsolete_setup("psmouse_smartscroll=");
+__obsolete_setup("psmouse_resetafter=");
+__obsolete_setup("psmouse_rate=");
+
static char *psmouse_protocols[] = { "None", "PS/2", "PS2++", "PS2T++", "GenPS/2", "ImPS/2", "ImExPS/2", "SynPS/2"};
/*
diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
--- a/drivers/input/serio/i8042.c Tue Mar 16 13:18:41 2004
+++ b/drivers/input/serio/i8042.c Tue Mar 16 13:18:41 2004
@@ -52,6 +52,13 @@
module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
+__obsolete_setup("i8042_noaux");
+__obsolete_setup("i8042_nomux");
+__obsolete_setup("i8042_unlock");
+__obsolete_setup("i8042_reset");
+__obsolete_setup("i8042_direct");
+__obsolete_setup("i8042_dumbkbd");
+
#undef DEBUG
#include "i8042.h"
next prev parent reply other threads:[~2004-03-16 14:34 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-03-16 14:17 [44 patches] Input update Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 1/44] Fix hid-core for devices with #usages < #values Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 2/44] Add ioctl to hiddev to set multiple usages at once Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 3/44] HID quirk (badpad) for Saitek Rumblepad Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 4/44] HID quirk for another A4Tech dual-wheel mouse Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 5/44] .ko module names for acm.txt Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 6/44] Fix sunkbd.c to work with serport Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 7/44] request_region() instead of check_region() in ns558.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 8/44] Don't reinitialize scancode map after sleep in atkbd.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 9/44] Support for scroll wheel on Office keyboards Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 10/44] Make enabling IBM RapidAccess special features its own option Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 11/44] Convert HP/PARISC Lasi/Dino PS/2 driver to a serio driver Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 12/44] Credit to Panagiotis Issaris for Graphire 3 support Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 13/44] Remove the obsolete busmouse.c helper driver Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 14/44] Fix a warning in i8042.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 15/44] Add serio entries for LK keyboards Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 16/44] Whitespace in atkbd.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 17/44] Automatically decide how strictly to check the protocol in synaptics Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 18/44] Whitespace fixes in psmouse.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 19/44] Don't fail when mouse reset doesn't work Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 20/44] Add module_parm_array() helper Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 21/44] Convert joystick drivers to new module parameters Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 22/44] Create __obsolete_setup() macro to warn users about obsolete kernel params Vojtech Pavlik
2004-03-16 14:19 ` Vojtech Pavlik [this message]
2004-03-16 14:19 ` [PATCH 24/44] Workaround i8042 chips with broken MUX mode Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 25/44] Only reprobe on PS/2 HW when the HW sends 0xaa Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 26/44] Always assume i8042 is in XLATE mode Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 27/44] Add DEC LK201/LK401 keyboard support Vojtech Pavlik
2004-03-17 19:08 ` Maciej W. Rozycki
2004-03-16 18:46 ` [PATCH 9/44] Support for scroll wheel on Office keyboards Aubin LaBrosse
2004-03-19 14:00 ` Vojtech Pavlik
2004-03-27 19:55 ` Andries Brouwer
2004-03-30 13:09 ` Pavel Machek
2004-03-30 17:05 ` Paul Wagland
2004-03-30 18:55 ` Vojtech Pavlik
2004-03-30 18:53 ` Vojtech Pavlik
2004-05-29 14:36 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10794467772648@twilight.ucw.cz \
--to=vojtech@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
--cc=vojtech@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox