From: Vojtech Pavlik <vojtech@suse.cz>
To: torvalds@osdl.org, vojtech@ucw.cz, linux-kernel@vger.kernel.org
Subject: [PATCH 32/44] Update of Wacom driver from Ping Cheng (from Wacom)
Date: Tue, 16 Mar 2004 15:19:37 +0100 [thread overview]
Message-ID: <10794467773323@twilight.ucw.cz> (raw)
In-Reply-To: <10794467773240@twilight.ucw.cz>
You can pull this changeset from:
bk://kernel.bkbits.net/vojtech/input
===================================================================
ChangeSet@1.1608.68.2, 2004-03-08 10:09:44+01:00, vojtech@suse.cz
input: Update the Wacom driver to latest version
from Ping Cheng from Wacom.
hid-core.c | 8 ++
wacom.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++++------------
2 files changed, 150 insertions(+), 35 deletions(-)
===================================================================
diff -Nru a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
--- a/drivers/usb/input/hid-core.c Tue Mar 16 13:18:07 2004
+++ b/drivers/usb/input/hid-core.c Tue Mar 16 13:18:07 2004
@@ -1320,6 +1320,8 @@
#define USB_DEVICE_ID_WACOM_INTUOS 0x0020
#define USB_DEVICE_ID_WACOM_PL 0x0030
#define USB_DEVICE_ID_WACOM_INTUOS2 0x0040
+#define USB_DEVICE_ID_WACOM_VOLITO 0x0060
+#define USB_DEVICE_ID_WACOM_PTU 0x0003
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
@@ -1404,6 +1406,7 @@
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 3, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 4, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 2, HID_QUIRK_IGNORE },
@@ -1415,11 +1418,14 @@
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
diff -Nru a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
--- a/drivers/usb/input/wacom.c Tue Mar 16 13:18:07 2004
+++ b/drivers/usb/input/wacom.c Tue Mar 16 13:18:07 2004
@@ -8,8 +8,8 @@
* Copyright (c) 2000 James E. Blair <corvus@gnu.org>
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
- * Copyright (c) 2002 Ping Cheng <pingc@wacom.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
+ * Copyright (c) 2002-2004 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
@@ -50,6 +50,7 @@
* - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
* - Cleanups here and there
* v1.30.1 (pi) - Added Graphire3 support
+ * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
*/
/*
@@ -108,7 +109,7 @@
static int usb_set_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
{
- return usb_control_msg(interface_to_usbdev(intf),
+ return usb_control_msg(interface_to_usbdev(intf),
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
@@ -139,14 +140,12 @@
}
if (data[0] != 2)
- dbg("received unknown report #%d", data[0]);
+ dbg("wacom_pl_irq: received unknown report #%d", data[0]);
prox = data[1] & 0x40;
input_regs(dev, regs);
- input_report_key(dev, BTN_TOOL_PEN, prox);
-
if (prox) {
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
@@ -154,15 +153,103 @@
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
pressure += (wacom->features->pressure_max + 1) / 2;
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ }
+ else {
+ /* was entered with stylus2 pressed */
+ if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
+ /* report out proximity for previous tool */
+ input_report_key(dev, wacom->tool[1], 0);
+ input_sync(dev);
+ wacom->tool[1] = BTN_TOOL_PEN;
+ goto exit;
+ }
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ }
+ input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
input_report_abs(dev, ABS_X, data[3] | ((__u32)data[2] << 7) | ((__u32)(data[1] & 0x03) << 14));
input_report_abs(dev, ABS_Y, data[6] | ((__u32)data[5] << 7) | ((__u32)(data[4] & 0x03) << 14));
input_report_abs(dev, ABS_PRESSURE, pressure);
input_report_key(dev, BTN_TOUCH, data[4] & 0x08);
input_report_key(dev, BTN_STYLUS, data[4] & 0x10);
- input_report_key(dev, BTN_STYLUS2, data[4] & 0x20);
+ /* Only allow the stylus2 button to be reported for the pen tool. */
+ input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
}
-
+ else {
+ /* report proximity-out of a (valid) tool */
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ }
+ input_report_key(dev, wacom->tool[1], prox);
+ }
+
+ wacom->tool[0] = prox; /* Save proximity state */
+ input_sync(dev);
+
+exit:
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
+ err ("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+}
+
+static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct wacom *wacom = urb->context;
+ unsigned char *data = wacom->data;
+ struct input_dev *dev = &wacom->dev;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ if (data[0] != 2)
+ {
+ printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+ }
+
+ input_regs(dev, regs);
+ if (data[1] & 0x04)
+ {
+ input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
+ input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
+ }
+ else
+ {
+ input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
+ input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+ }
+ input_report_abs(dev, ABS_X, data[3] << 8 | data[2]);
+ input_report_abs(dev, ABS_Y, data[5] << 8 | data[4]);
+ input_report_abs(dev, ABS_PRESSURE, (data[6]|data[7] << 8));
+ input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+ input_report_key(dev, BTN_STYLUS2, data[1] & 0x10);
+
input_sync(dev);
exit:
@@ -233,8 +320,12 @@
goto exit;
}
+ /* check if we can handle the data */
+ if (data[0] == 99)
+ goto exit;
+
if (data[0] != 2)
- dbg("received unknown report #%d", data[0]);
+ dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
x = data[2] | ((__u32)data[3] << 8);
y = data[4] | ((__u32)data[5] << 8);
@@ -251,13 +342,16 @@
input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x80);
break;
- case 2: /* Mouse */
+ case 2: /* Mouse with wheel */
+ input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
+ input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+ /* fall through */
+
+ case 3: /* Mouse without wheel */
input_report_key(dev, BTN_TOOL_MOUSE, data[7] > 24);
input_report_key(dev, BTN_LEFT, data[1] & 0x01);
input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
- input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
input_report_abs(dev, ABS_DISTANCE, data[7]);
- input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
@@ -310,7 +404,7 @@
}
if (data[0] != 2)
- dbg("received unknown report #%d", data[0]);
+ dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
input_regs(dev, regs);
@@ -319,18 +413,18 @@
if ((data[1] & 0xfc) == 0xc0) { /* Enter report */
- wacom->serial[idx] = ((__u32)(data[3] & 0x0f) << 4) + /* serial number of the tool */
- ((__u32)data[4] << 16) + ((__u32)data[5] << 12) +
+ wacom->serial[idx] = ((__u32)(data[3] & 0x0f) << 28) + /* serial number of the tool */
+ ((__u32)data[4] << 20) + ((__u32)data[5] << 12) +
((__u32)data[6] << 4) + (data[7] >> 4);
switch (((__u32)data[2] << 4) | (data[3] >> 4)) {
- case 0x832:
+ case 0x812:
case 0x012: wacom->tool[idx] = BTN_TOOL_PENCIL; break; /* Inking pen */
case 0x822:
case 0x842:
case 0x852:
case 0x022: wacom->tool[idx] = BTN_TOOL_PEN; break; /* Pen */
- case 0x812:
+ case 0x832:
case 0x032: wacom->tool[idx] = BTN_TOOL_BRUSH; break; /* Stroke pen */
case 0x007:
case 0x09c:
@@ -339,7 +433,10 @@
case 0x82a:
case 0x85a:
case 0x91a:
+ case 0xd1a:
case 0x0fa: wacom->tool[idx] = BTN_TOOL_RUBBER; break; /* Eraser */
+ case 0xd12:
+ case 0x912:
case 0x112: wacom->tool[idx] = BTN_TOOL_AIRBRUSH; break; /* Airbrush */
default: wacom->tool[idx] = BTN_TOOL_PEN; break; /* Unknown tool */
}
@@ -352,13 +449,14 @@
if ((data[1] & 0xfe) == 0x80) { /* Exit report */
input_report_key(dev, wacom->tool[idx], 0);
+ input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
goto exit;
}
input_report_abs(dev, ABS_X, ((__u32)data[2] << 8) | data[3]);
input_report_abs(dev, ABS_Y, ((__u32)data[4] << 8) | data[5]);
- input_report_abs(dev, ABS_DISTANCE, data[9] >> 4);
+ input_report_abs(dev, ABS_DISTANCE, data[9]);
if ((data[1] & 0xb8) == 0xa0) { /* general pen packet */
input_report_abs(dev, ABS_PRESSURE, t = ((__u32)data[6] << 2) | ((data[7] >> 6) & 3));
@@ -380,8 +478,8 @@
if (data[1] & 0x02) { /* Rotation packet */
input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ?
- ((__u32)data[6] << 2) | ((data[7] >> 6) & 3):
- (-(((__u32)data[6] << 2) | ((data[7] >> 6) & 3))) - 1);
+ ((__u32)data[6] << 3) | ((data[7] >> 5) & 7):
+ (-(((__u32)data[6] << 3) | ((data[7] >> 5) & 7))) - 1);
} else {
@@ -393,17 +491,17 @@
input_report_key(dev, BTN_SIDE, data[8] & 0x20);
input_report_key(dev, BTN_EXTRA, data[8] & 0x10);
- input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ?
+ input_report_abs(dev, ABS_THROTTLE, -((data[8] & 0x08) ?
((__u32)data[6] << 2) | ((data[7] >> 6) & 3) :
- -((__u32)data[6] << 2) | ((data[7] >> 6) & 3));
+ -((__u32)data[6] << 2) | ((data[7] >> 6) & 3)));
} else {
if (wacom->tool[idx] == BTN_TOOL_MOUSE) { /* 2D mouse packets */
input_report_key(dev, BTN_LEFT, data[8] & 0x04);
input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
input_report_key(dev, BTN_RIGHT, data[8] & 0x10);
- input_report_abs(dev, REL_WHEEL,
- ((__u32)(data[8] & 0x01) - (__u32)((data[8] & 0x02) >> 1)));
+ input_report_rel(dev, REL_WHEEL,
+ (-(__u32)(data[8] & 0x01) + (__u32)((data[8] & 0x02) >> 1)));
}
else { /* Lens cursor packets */
input_report_key(dev, BTN_LEFT, data[8] & 0x01);
@@ -416,6 +514,8 @@
}
}
+ input_report_key(dev, wacom->tool[idx], 1);
+ input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
exit:
@@ -431,22 +531,26 @@
{ "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, 1, wacom_graphire_irq },
{ "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, 1, wacom_graphire_irq },
{ "Wacom Graphire3", 8, 10208, 7424, 511, 32, 1, wacom_graphire_irq },
- { "Wacom Intuos 4x5", 10, 12700, 10360, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos 6x8", 10, 20600, 16450, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos 9x12", 10, 30670, 24130, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos 12x12", 10, 30670, 31040, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos 12x18", 10, 45860, 31040, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, 1, wacom_graphire_irq },
+ { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, 2, wacom_intuos_irq },
{ "Wacom PL400", 8, 5408, 4056, 255, 32, 3, wacom_pl_irq },
{ "Wacom PL500", 8, 6144, 4608, 255, 32, 3, wacom_pl_irq },
{ "Wacom PL600", 8, 6126, 4604, 255, 32, 3, wacom_pl_irq },
{ "Wacom PL600SX", 8, 6260, 5016, 255, 32, 3, wacom_pl_irq },
{ "Wacom PL550", 8, 6144, 4608, 511, 32, 3, wacom_pl_irq },
{ "Wacom PL800", 8, 7220, 5780, 511, 32, 3, wacom_pl_irq },
- { "Wacom Intuos2 4x5", 10, 12700, 10360, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos2 6x8", 10, 20600, 16450, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos2 9x12", 10, 30670, 24130, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos2 12x12", 10, 30670, 31040, 1023, 15, 2, wacom_intuos_irq },
- { "Wacom Intuos2 12x18", 10, 45860, 31040, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, 2, wacom_intuos_irq },
+ { "Wacom Volito", 8, 5104, 3712, 511, 32, 1, wacom_graphire_irq },
+ { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, 3, wacom_ptu_irq },
+ { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, 2, wacom_intuos_irq },
{ }
};
@@ -456,6 +560,7 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
@@ -472,6 +577,9 @@
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
@@ -540,8 +648,9 @@
break;
case 2:
- wacom->dev.evbit[0] |= BIT(EV_MSC);
+ wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
wacom->dev.mscbit[0] |= BIT(MSC_SERIAL);
+ wacom->dev.relbit[0] |= BIT(REL_WHEEL);
wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
next prev parent reply other threads:[~2004-03-16 14:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <10794467771611@twilight.ucw.cz>
2004-03-16 14:19 ` [PATCH 29/44] HID quirk (badpad) for NEC gamepad Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 30/44] Separate HID quirks for different A4Tech mice Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 31/44] Fix i8042 PS/2 mouse on ARM Vojtech Pavlik
2004-03-16 14:19 ` Vojtech Pavlik [this message]
2004-03-16 14:19 ` [PATCH 33/44] Fix for devices that need padded HID packets Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 34/44] Fix a memory leak in ns558.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 35/44] HID quirk (badpad) for Chic gamepad Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 36/44] Don't define DEBUG in hid-ff by default Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 37/44] Restore LED state in atkbd.c after resume Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 38/44] Fix oops (NULL pointer dereference) on resume in psmouse.c Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 39/44] Fix an endless loop in hid-core.c if device has empty reports Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 40/44] Fix for HID devices which need nonzero idle for the ctrl pipe Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 41/44] Don't ignore PS/2 data immediately after disconnect Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 42/44] Do a full reset of Synaptics touchpad if extended protocol probes failed Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 43/44] Enable relative mode and gestures if Synaptics uses non-native protocol Vojtech Pavlik
2004-03-16 14:19 ` [PATCH 44/44] Fixes in wacom.c: SLAB_ATOMIC->GFP_KERNEL and count bug in open() Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=10794467773323@twilight.ucw.cz \
--to=vojtech@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
--cc=vojtech@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox