* [PATCH] PowerMac: cleanup of some scsi drivers
@ 2004-04-02 7:20 Benjamin Herrenschmidt
0 siblings, 0 replies; only message in thread
From: Benjamin Herrenschmidt @ 2004-04-02 7:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linus Torvalds, Linux Kernel list
Hi !
This patch from Christoph Hellwig does much welcomes cleanup of
the old mac53c94 and mesh SCSI drivers, removing sillycaps etc...
Please apply,
Ben.
--- 1.8/drivers/scsi/mac53c94.c Thu Feb 5 06:44:32 2004
+++ edited/drivers/scsi/mac53c94.c Fri Feb 13 07:58:29 2004
@@ -25,8 +25,11 @@
#include <asm/pci-bridge.h>
#include <asm/macio.h>
-#include "scsi.h"
-#include "hosts.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
#include "mac53c94.h"
enum fsc_phase {
@@ -44,9 +47,9 @@
int dmaintr;
int clk_freq;
struct Scsi_Host *host;
- Scsi_Cmnd *request_q;
- Scsi_Cmnd *request_qtail;
- Scsi_Cmnd *current_req; /* req we're currently working on */
+ struct scsi_cmnd *request_q;
+ struct scsi_cmnd *request_qtail;
+ struct scsi_cmnd *current_req; /* req we're currently working on */
enum fsc_phase phase; /* what we're currently trying to do */
struct dbdma_cmd *dma_cmds; /* space for dbdma commands, aligned */
void *dma_cmd_space;
@@ -60,15 +63,15 @@
static void mac53c94_interrupt(int, void *, struct pt_regs *);
static irqreturn_t do_mac53c94_interrupt(int, void *, struct pt_regs *);
static void cmd_done(struct fsc_state *, int result);
-static void set_dma_cmds(struct fsc_state *, Scsi_Cmnd *);
+static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
-static int mac53c94_queue(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct fsc_state *state;
#if 0
- if (cmd->sc_data_direction == SCSI_DATA_WRITE) {
+ if (cmd->sc_data_direction == DMA_TO_DEVICE) {
int i;
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
for (i = 0; i < cmd->cmd_len; ++i)
@@ -95,12 +98,12 @@
return 0;
}
-static int mac53c94_abort(Scsi_Cmnd *cmd)
+static int mac53c94_abort(struct scsi_cmnd *cmd)
{
- return SCSI_ABORT_SNOOZE;
+ return FAILED;
}
-static int mac53c94_host_reset(Scsi_Cmnd *cmd)
+static int mac53c94_host_reset(struct scsi_cmnd *cmd)
{
struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
struct mac53c94_regs *regs = state->regs;
@@ -139,7 +142,7 @@
*/
static void mac53c94_start(struct fsc_state *state)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
struct mac53c94_regs *regs = state->regs;
int i;
@@ -148,7 +151,7 @@
if (state->request_q == NULL)
return;
state->current_req = cmd = state->request_q;
- state->request_q = (Scsi_Cmnd *) cmd->host_scribble;
+ state->request_q = (struct scsi_cmnd *) cmd->host_scribble;
/* Off we go */
writeb(0, ®s->count_lo);
@@ -190,10 +193,9 @@
struct fsc_state *state = (struct fsc_state *) dev_id;
struct mac53c94_regs *regs = state->regs;
struct dbdma_regs *dma = state->dma;
- Scsi_Cmnd *cmd = state->current_req;
+ struct scsi_cmnd *cmd = state->current_req;
int nb, stat, seq, intr;
static int mac53c94_errors;
- int dma_dir;
/*
* Apparently, reading the interrupt register unlatches
@@ -308,14 +310,13 @@
printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
}
writel(RUN << 16, &dma->control); /* stop dma */
- dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
if (cmd->use_sg != 0) {
pci_unmap_sg(state->pdev,
(struct scatterlist *)cmd->request_buffer,
- cmd->use_sg, dma_dir);
+ cmd->use_sg, cmd->sc_data_direction);
} else {
pci_unmap_single(state->pdev, state->dma_addr,
- cmd->request_bufflen, dma_dir);
+ cmd->request_bufflen, cmd->sc_data_direction);
}
/* should check dma status */
writeb(CMD_I_COMPLETE, ®s->command);
@@ -347,7 +348,7 @@
static void cmd_done(struct fsc_state *state, int result)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
cmd = state->current_req;
if (cmd != 0) {
@@ -362,24 +363,24 @@
/*
* Set up DMA commands for transferring data.
*/
-static void set_dma_cmds(struct fsc_state *state, Scsi_Cmnd *cmd)
+static void set_dma_cmds(struct fsc_state *state, struct scsi_cmnd *cmd)
{
int i, dma_cmd, total;
struct scatterlist *scl;
struct dbdma_cmd *dcmds;
dma_addr_t dma_addr;
u32 dma_len;
- int dma_dir = scsi_to_pci_dma_dir(cmd->sc_data_direction);
- dma_cmd = cmd->sc_data_direction == SCSI_DATA_WRITE? OUTPUT_MORE:
- INPUT_MORE;
+ dma_cmd = cmd->sc_data_direction == DMA_TO_DEVICE ?
+ OUTPUT_MORE : INPUT_MORE;
dcmds = state->dma_cmds;
if (cmd->use_sg > 0) {
int nseg;
total = 0;
scl = (struct scatterlist *) cmd->buffer;
- nseg = pci_map_sg(state->pdev, scl, cmd->use_sg, dma_dir);
+ nseg = pci_map_sg(state->pdev, scl, cmd->use_sg,
+ cmd->sc_data_direction);
for (i = 0; i < nseg; ++i) {
dma_addr = sg_dma_address(scl);
dma_len = sg_dma_len(scl);
@@ -398,7 +399,7 @@
if (total > 0xffff)
panic("mac53c94: transfer size >= 64k");
dma_addr = pci_map_single(state->pdev, cmd->request_buffer,
- total, dma_dir);
+ total, cmd->sc_data_direction);
state->dma_addr = dma_addr;
st_le16(&dcmds->req_count, total);
st_le32(&dcmds->phy_addr, dma_addr);
@@ -411,7 +412,7 @@
cmd->SCp.this_residual = total;
}
-static Scsi_Host_Template mac53c94_template = {
+static struct scsi_host_template mac53c94_template = {
.proc_name = "53c94",
.name = "53C94",
.queuecommand = mac53c94_queue,
===== drivers/scsi/mesh.c 1.11 vs edited =====
--- 1.11/drivers/scsi/mesh.c Thu Feb 5 06:47:27 2004
+++ edited/drivers/scsi/mesh.c Fri Feb 13 07:58:31 2004
@@ -44,8 +44,11 @@
#include <asm/pci-bridge.h>
#include <asm/macio.h>
-#include "scsi.h"
-#include "hosts.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
#include "mesh.h"
#if 1
@@ -131,7 +134,7 @@
enum sdtr_phase sdtr_state;
int sync_params;
int data_goes_out; /* guess as to data direction */
- Scsi_Cmnd *current_req;
+ struct scsi_cmnd *current_req;
u32 saved_ptr;
#ifdef MESH_DBG
int log_ix;
@@ -147,12 +150,12 @@
int dmaintr;
struct Scsi_Host *host;
struct mesh_state *next;
- Scsi_Cmnd *request_q;
- Scsi_Cmnd *request_qtail;
+ struct scsi_cmnd *request_q;
+ struct scsi_cmnd *request_qtail;
enum mesh_phase phase; /* what we're currently trying to do */
enum msg_phase msgphase;
int conn_tgt; /* target we're connected to */
- Scsi_Cmnd *current_req; /* req we're currently working on */
+ struct scsi_cmnd *current_req; /* req we're currently working on */
int data_ptr;
int dma_started;
int dma_count;
@@ -185,7 +188,7 @@
static void mesh_done(struct mesh_state *ms, int start_next);
static void mesh_interrupt(int irq, void *dev_id, struct pt_regs *ptregs);
static void cmd_complete(struct mesh_state *ms);
-static void set_dma_cmds(struct mesh_state *ms, Scsi_Cmnd *cmd);
+static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd);
static void halt_dma(struct mesh_state *ms);
static void phase_mismatch(struct mesh_state *ms);
@@ -344,7 +347,7 @@
/*
* Complete a SCSI command
*/
-static void mesh_completed(struct mesh_state *ms, Scsi_Cmnd *cmd)
+static void mesh_completed(struct mesh_state *ms, struct scsi_cmnd *cmd)
{
(*cmd->scsi_done)(cmd);
}
@@ -402,14 +405,14 @@
}
-static void mesh_start_cmd(struct mesh_state *ms, Scsi_Cmnd *cmd)
+static void mesh_start_cmd(struct mesh_state *ms, struct scsi_cmnd *cmd)
{
volatile struct mesh_regs *mr = ms->mesh;
int t, id;
id = cmd->device->id;
ms->current_req = cmd;
- ms->tgts[id].data_goes_out = cmd->sc_data_direction == SCSI_DATA_WRITE;
+ ms->tgts[id].data_goes_out = cmd->sc_data_direction == DMA_TO_DEVICE;
ms->tgts[id].current_req = cmd;
#if 1
@@ -558,7 +561,7 @@
*/
static void mesh_start(struct mesh_state *ms)
{
- Scsi_Cmnd *cmd, *prev, *next;
+ struct scsi_cmnd *cmd, *prev, *next;
if (ms->phase != idle || ms->current_req != NULL) {
printk(KERN_ERR "inappropriate mesh_start (phase=%d, ms=%p)",
@@ -568,14 +571,14 @@
while (ms->phase == idle) {
prev = NULL;
- for (cmd = ms->request_q; ; cmd = (Scsi_Cmnd *) cmd->host_scribble) {
+ for (cmd = ms->request_q; ; cmd = (struct scsi_cmnd *) cmd->host_scribble) {
if (cmd == NULL)
return;
if (ms->tgts[cmd->device->id].current_req == NULL)
break;
prev = cmd;
}
- next = (Scsi_Cmnd *) cmd->host_scribble;
+ next = (struct scsi_cmnd *) cmd->host_scribble;
if (prev == NULL)
ms->request_q = next;
else
@@ -589,7 +592,7 @@
static void mesh_done(struct mesh_state *ms, int start_next)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
cmd = ms->current_req;
@@ -679,7 +682,7 @@
int i, seq, nb;
volatile struct mesh_regs *mr = ms->mesh;
volatile struct dbdma_regs *md = ms->dma;
- Scsi_Cmnd *cmd = ms->current_req;
+ struct scsi_cmnd *cmd = ms->current_req;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
dlog(ms, "start_phase nmo/exc/fc/seq = %.8x",
@@ -854,7 +857,7 @@
static void reselected(struct mesh_state *ms)
{
volatile struct mesh_regs *mr = ms->mesh;
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
struct mesh_target *tp;
int b, t, prev;
@@ -985,7 +988,7 @@
{
int tgt;
struct mesh_target *tp;
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
volatile struct mesh_regs *mr = ms->mesh;
for (tgt = 0; tgt < 8; ++tgt) {
@@ -1000,7 +1003,7 @@
}
ms->current_req = NULL;
while ((cmd = ms->request_q) != NULL) {
- ms->request_q = (Scsi_Cmnd *) cmd->host_scribble;
+ ms->request_q = (struct scsi_cmnd *) cmd->host_scribble;
cmd->result = DID_RESET << 16;
mesh_completed(ms, cmd);
}
@@ -1154,7 +1157,7 @@
static void handle_msgin(struct mesh_state *ms)
{
int i, code;
- Scsi_Cmnd *cmd = ms->current_req;
+ struct scsi_cmnd *cmd = ms->current_req;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
if (ms->n_msgin == 0)
@@ -1252,7 +1255,7 @@
/*
* Set up DMA commands for transferring data.
*/
-static void set_dma_cmds(struct mesh_state *ms, Scsi_Cmnd *cmd)
+static void set_dma_cmds(struct mesh_state *ms, struct scsi_cmnd *cmd)
{
int i, dma_cmd, total, off, dtot;
struct scatterlist *scl;
@@ -1270,7 +1273,7 @@
scl = (struct scatterlist *) cmd->buffer;
off = ms->data_ptr;
nseg = pci_map_sg(ms->pdev, scl, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd ->sc_data_direction));
+ cmd->sc_data_direction);
for (i = 0; i <nseg; ++i, ++scl) {
u32 dma_addr = sg_dma_address(scl);
u32 dma_len = sg_dma_len(scl);
@@ -1324,7 +1327,7 @@
{
volatile struct dbdma_regs *md = ms->dma;
volatile struct mesh_regs *mr = ms->mesh;
- Scsi_Cmnd *cmd = ms->current_req;
+ struct scsi_cmnd *cmd = ms->current_req;
int t, nb;
if (!ms->tgts[ms->conn_tgt].data_goes_out) {
@@ -1364,8 +1367,7 @@
if (cmd->use_sg != 0) {
struct scatterlist *sg;
sg = (struct scatterlist *)cmd->request_buffer;
- pci_unmap_sg(ms->pdev, sg, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ pci_unmap_sg(ms->pdev, sg, cmd->use_sg, cmd->sc_data_direction);
}
ms->dma_started = 0;
}
@@ -1452,7 +1454,7 @@
static void cmd_complete(struct mesh_state *ms)
{
volatile struct mesh_regs *mr = ms->mesh;
- Scsi_Cmnd *cmd = ms->current_req;
+ struct scsi_cmnd *cmd = ms->current_req;
struct mesh_target *tp = &ms->tgts[ms->conn_tgt];
int seq, n, t;
@@ -1635,7 +1637,7 @@
* Called by midlayer with host locked to queue a new
* request
*/
-static int mesh_queue(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
struct mesh_state *ms;
@@ -1692,7 +1694,7 @@
* queue if it isn't connected yet, and for pending command, assert
* ATN until the bus gets freed.
*/
-static int mesh_abort(Scsi_Cmnd *cmd)
+static int mesh_abort(struct scsi_cmnd *cmd)
{
struct mesh_state *ms = (struct mesh_state *) cmd->device->host->hostdata;
@@ -1700,7 +1702,7 @@
mesh_dump_regs(ms);
dumplog(ms, cmd->device->id);
dumpslog(ms);
- return SCSI_ABORT_SNOOZE;
+ return FAILED;
}
/*
@@ -1709,7 +1711,7 @@
* The midlayer will wait for devices to come back, we don't need
* to do that ourselves
*/
-static int mesh_host_reset(Scsi_Cmnd *cmd)
+static int mesh_host_reset(struct scsi_cmnd *cmd)
{
struct mesh_state *ms = (struct mesh_state *) cmd->device->host->hostdata;
volatile struct mesh_regs *mr = ms->mesh;
@@ -1832,7 +1834,7 @@
return 0;
}
-static Scsi_Host_Template mesh_template = {
+static struct scsi_host_template mesh_template = {
.proc_name = "mesh",
.name = "MESH",
.queuecommand = mesh_queue,
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-02 7:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-02 7:20 [PATCH] PowerMac: cleanup of some scsi drivers Benjamin Herrenschmidt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox