From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] PCI and PCI Hotplug update for 2.6.6-rc1
Date: Thu, 15 Apr 2004 10:23:45 -0700 [thread overview]
Message-ID: <1082049825687@kroah.com> (raw)
In-Reply-To: <10820498251273@kroah.com>
ChangeSet 1.1692.3.7, 2004/03/30 17:26:44-08:00, rddunlap@osdl.org
[PATCH] PCI: add DMA_{64,32}BIT constants
On Tue, 23 Mar 2004 00:23:05 -0500 Jeff Garzik <jgarzik@pobox.com> wrote:
>>Yeah well... in the intervening time, somebody on IRC commented
>>
>>"so what is so PCI-specific about those constants?"
>>
>>They probably ought to be DMA_{32,64}BIT_MASK or somesuch.
Here's an updated patch, applies to 2.6.5-rc2-bk9.
I left the DMA_xxBIT_MASK defines in linux/pci.h, although
they aren't necessarily PCI-specific. Would we prefer to
have them in linux/dma-mapping.h ?
Documentation/DMA-mapping.txt | 16 ++++++++--------
drivers/net/e1000/e1000.h | 2 --
drivers/net/e1000/e1000_main.c | 4 ++--
drivers/net/ixgb/ixgb.h | 2 --
drivers/net/ixgb/ixgb_main.c | 4 ++--
include/linux/pci.h | 3 +++
6 files changed, 15 insertions(+), 16 deletions(-)
diff -Nru a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
--- a/Documentation/DMA-mapping.txt Thu Apr 15 10:05:07 2004
+++ b/Documentation/DMA-mapping.txt Thu Apr 15 10:05:07 2004
@@ -132,7 +132,7 @@
The standard 32-bit addressing PCI device would do something like
this:
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
goto ignore_this_device;
@@ -151,9 +151,9 @@
int using_dac;
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffff)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pdev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING
@@ -166,14 +166,14 @@
int using_dac, consistent_using_dac;
- if (!pci_set_dma_mask(pdev, 0xffffffffffffffff)) {
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
using_dac = 1;
consistent_using_dac = 1;
- pci_set_consistent_dma_mask(pdev, 0xffffffffffffffff)
- } else if (!pci_set_dma_mask(pdev, 0xffffffff)) {
+ pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ } else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
using_dac = 0;
consistent_using_dac = 0;
- pci_set_consistent_dma_mask(pdev, 0xffffffff)
+ pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
} else {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
@@ -215,7 +215,7 @@
Here is pseudo-code showing how this might be done:
- #define PLAYBACK_ADDRESS_BITS 0xffffffff
+ #define PLAYBACK_ADDRESS_BITS DMA_32BIT_MASK
#define RECORD_ADDRESS_BITS 0x00ffffff
struct my_sound_card *card;
diff -Nru a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
--- a/drivers/net/e1000/e1000.h Thu Apr 15 10:05:07 2004
+++ b/drivers/net/e1000/e1000.h Thu Apr 15 10:05:07 2004
@@ -74,8 +74,6 @@
#define BAR_0 0
#define BAR_1 1
#define BAR_5 5
-#define PCI_DMA_64BIT 0xffffffffffffffffULL
-#define PCI_DMA_32BIT 0x00000000ffffffffULL
struct e1000_adapter;
diff -Nru a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c Thu Apr 15 10:05:07 2004
+++ b/drivers/net/e1000/e1000_main.c Thu Apr 15 10:05:07 2004
@@ -383,10 +383,10 @@
if((err = pci_enable_device(pdev)))
return err;
- if(!(err = pci_set_dma_mask(pdev, PCI_DMA_64BIT))) {
+ if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
- if((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
+ if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
E1000_ERR("No usable DMA configuration, aborting\n");
return err;
}
diff -Nru a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
--- a/drivers/net/ixgb/ixgb.h Thu Apr 15 10:05:07 2004
+++ b/drivers/net/ixgb/ixgb.h Thu Apr 15 10:05:07 2004
@@ -65,8 +65,6 @@
#define BAR_0 0
#define BAR_1 1
#define BAR_5 5
-#define PCI_DMA_64BIT 0xffffffffffffffffULL
-#define PCI_DMA_32BIT 0x00000000ffffffffULL
#include "ixgb_hw.h"
#include "ixgb_ee.h"
diff -Nru a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
--- a/drivers/net/ixgb/ixgb_main.c Thu Apr 15 10:05:07 2004
+++ b/drivers/net/ixgb/ixgb_main.c Thu Apr 15 10:05:07 2004
@@ -308,10 +308,10 @@
return i;
}
- if (!(i = pci_set_dma_mask(pdev, PCI_DMA_64BIT))) {
+ if (!(i = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
- if ((i = pci_set_dma_mask(pdev, PCI_DMA_32BIT))) {
+ if ((i = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
IXGB_ERR("No usable DMA configuration, aborting\n");
return i;
}
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
--- a/include/linux/pci.h Thu Apr 15 10:05:07 2004
+++ b/include/linux/pci.h Thu Apr 15 10:05:07 2004
@@ -433,6 +433,9 @@
#define PCI_DMA_FROMDEVICE 2
#define PCI_DMA_NONE 3
+#define DMA_64BIT_MASK 0xffffffffffffffffULL
+#define DMA_32BIT_MASK 0x00000000ffffffffULL
+
#define DEVICE_COUNT_COMPATIBLE 4
#define DEVICE_COUNT_RESOURCE 12
next prev parent reply other threads:[~2004-04-15 18:42 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-15 17:19 [BK PATCH] PCI and PCI Hotplug update for 2.6.6-rc1 Greg KH
2004-04-15 17:23 ` [PATCH] " Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH [this message]
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
2004-04-15 17:23 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1082049825687@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox