* Not able to read BSD-disklables (newer 2.4 and 2.6)
@ 2004-04-21 18:52 Sveinung Kvilhaugsvik
0 siblings, 0 replies; only message in thread
From: Sveinung Kvilhaugsvik @ 2004-04-21 18:52 UTC (permalink / raw)
To: linux-kernel
Hello
I created a bsd-disklabel on a harddisk using GNU Parted. Earlyer (and
in Knoppix), i was able to get access to the partison on it (it is a
standart ext3), however, on newer 2.4.x and 2.6.x (only tryed one 2.6.x,
and it did not work), I am not able to read the disklabel. dmesg tells
me this:
hda: 39876480 sectors (20416 MB) w/1966KiB Cache, CHS=39560/16/63
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
hdb: max request size: 128KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
/dev/ide/host0/bus0/target1/lun0: unknown partition table
I have complied in the BDS-disklabelsupport in the Advanced partition
selection. (The one is listed under PC BIOS). Is there something wrong
with my configuration? (I am on a x86 computer)
Sincerly
Sveinung Kvilhaugsvik
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-04-21 18:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-04-21 18:52 Not able to read BSD-disklables (newer 2.4 and 2.6) Sveinung Kvilhaugsvik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox